Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In order to reduce the direct injuries caused by falling from height, we propose a new type of suspended elastic safety net system suitable for pylon assembly construction. Analyze the correlation between damping and toughness of the protection system, establish the falling object motion control method, and construct the mechanism model of the protection system accordingly. Full-scale impact tests are carried out using test pylons on transmission line projects. Test data is collected using high-speed cameras and dynamic data acquisition equipment to analyze the key impact dynamic response characteristics of the test model. The experimental results show that the system has three working stages. In the first stage, the elastic safety net is transformed from an initial equilibrium state, where it is subjected only to its gravity, to a taut state. In the second stage, as the elongation of the system continues to increase in the direction of impact, the internal forces transmitted by the net to the elastic rod and the supporting rope gradually increase until the energy dissipating devices connected to the elastic rod are activated. In the third stage, additional elongation of the system is provided by activating the support springs in the bearing supports. Based on the failure modes observed in the tests, the key factors leading to the breakdown of the system are investigated. A new numerical simulation method is developed which is not only capable of predicting the load-bearing capacity of an elastic safety net system under the impact of a falling object, but also accurately simulates the main operating characteristics, such as buckling of the elastic rods, activation of the energy-absorbing devices, and deformation of the net ropes. The numerical simulation model was evaluated using the experimental results, and the numerical response of the system was in good agreement with the experimental data.

Research and application on intelligent monitoring and early warning system for Inner-Suspended gin poles

Theoretical and experimental study on tensioning of suspend-dome

Monitoring on the Lifting of a Steel Structure Gallery

Development of a monitoring system for disassembled towers with internal suspension poles

Stress monitoring and analysis of the steel structure of Hangzhou Olympic Tennis Center on construction

Construction monitoring of the steel structure for Hangzhou East Railway Station Building

Design And Testing Of A Wireless Strain Sensor Toward Large-Span Spatial Structures

Development of Online Safety Monitoring Information Management System for Bridges in Hangzhou City

Development of Elasto-Magneto-Electric (eme) Sensor for In-Service Cable Force Monitoring

The Research of a Intelligent Monitor Control System for Tension String Equipment

Health monitoring system of steel-tube arch bridge : design and implementation of a teaching demonstration platform

Safety Analysis of Landing-Type Lifting Pole with Double-Level Arms under Wind Load Function

Technology of Actual Wind Deviation Monitoring for Suspension Insulator Strings Based on Improved Edge Detection

Real-Time Structural Monitoring of the Multi-Point Hoisting of a Long-Span Converter Station Steel Structure

Research on Construction Monitoring Technology of Stringing Block of Transmission Line

An online monitoring technology of tower foundation deformation of transmission lines

Design of flexible sensor for wind pressure monitoring of stay cables

Design and characteristic research of smart rod based on optical fiber grating for strain monitoring of power transmission tower

Wind-Induced Vibration Monitoring of High-Mast Illumination Poles Using Wireless Smart Sensors

Research on impact resistance of new suspended elastic safety net system

Design of Anti-Eccentric Load Sensor for Engineering Operation Early Warning Based on Particle Swarm Optimization