Abstract:High-temperature thermal energy storage in oxide particles at temperatures above 600°C can couple concentrated solar energy with high-efficiency thermal power cycles to provide dispatchable solar-driven electricity. Challenges remain in developing cost-effective primary heat exchangers, which require expensive alloys, to extract the high-temperature thermal energy from the particles to power cycle fluids, such as supercritical CO 2 (sCO 2 ) in recuperated Brayton cycles. To explore one pathway for cost-effective, high-temperature particle heat exchangers, the current study demonstrates a shell-and-plate, particle–sCO 2 heat exchanger with narrow-channel fluidized beds coupled with micro-channel sCO 2 flows in the heat exchanger walls. This study evaluates the feasibility of multiple parallel, narrow-channel fluidized beds in shell-and-plate particle–sCO 2 HXs, to achieve high bed-wall heat fluxes at elevated temperatures. A reduced-order model simulates the narrow-channel, fluidized-bed particle–sCO 2 heat exchanger to design the fluidized bed geometry, in terms of depth, height, and number of channels,for a nominal 40-kW th heat exchanger at particle and sCO 2 inlet temperatures up to 600°C and 400°C respectively. The resulting shell-and-plate heat exchanger design operates with bubbling fluidization of the downward-flowing oxide particles to enhance bed-wall heat transfer. The heat exchanger core is fabricated with etched sCO 2 micro-channels in thin wall plates that are diffusion bonded to spacer frames to form the shell-and-plate structure with 12 parallel, fluidized bed channels, 10.4 mm deep. The heat exchanger is tested at the National Solar Thermal Test Facility at Sandia National Laboratories with CARBOBEAD HSP particles at design particle flow rates of 0.20 kg s −1 and inlet temperatures up to 525°C . Results show that fluidization across multiple parallel channel beds can maintain uniform particle inventory with a common freeboard zone above the heat exchanger core. Bubbling fluidization improves particle–wall heat transfer coefficients but also increases axial dispersion of particle thermal energy, which lowers the log-mean temperature difference such that total heat transfer remains relatively constant to within ±10% over a broad range of fluidization gas velocities. The axial dispersion required particle and sCO 2 flow rates to be increased by 25% over model-designed conditions to achieve the targeted 40 kW th , which indicates the importance of incorporating axial dispersion into heat exchanger design models and of deploying bed structures to suppress it. This study demonstrates the feasibility and preferred fluidizing gas conditions for particle heat exchangers for releasing high-temperature thermal energy storage systems.

Design of Modular Test Facility for Particle/sCO2 Heat Exchanger Evaluation

Development and Testing of a 20 kW Moving Packed-Bed Particle-To-sCO2 Heat Exchanger and Test Facility

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

Development and Validation of Helical-Coil-in-fluted-tube Gas Cooler for CO2 Heat Pump Water Heaters

Evaluation of Alternative Designs for a High Temperature Particle-to-sCO2 Heat Exchanger

ICONE23-1913 DESIGN AND STUDY OF ENGINEERING TEST FACILITY : HELIUM CIRCULATOR

Demonstration of a multi-channel fluidized bed particle–supercritical carbon dioxide heat exchanger for concentrating solar applications

Comparison, advancement, and performance evaluation of heat exchanger assembly in solid-state hydrogen storage device

Design and Optimization of a Helix Finned Tube Heat Exchanger for 2 K Superfluid Helium Vertical Test Stand

Design Features and Simulation of the New-Build HELOKA-US Facility for the Validation of the DEMO Helium-Cooled Pebble Bed Intermediate Heat Transport and Storage System

Multi-objective Optimization Design and Strength Analysis of Printed Circuit Heat Exchangers for Supercritical CO2 Brayton Cycle

Heating system design and validation for the pebble bed effective thermal conductivity experiment in a high temperature gas cooled reactor

Design of a Thermal Performance Test Equipment for a High-Temperature and High-Pressure Heat Exchanger in an Aero-Engine

Optimization-Inspired Pin-Fin Array for Supercritical Carbon Dioxide Recuperator

In-field Performance Evaluation of a Large Size Multistream Plate Fin Heat Exchanger Installed in a Helium Liquefier

An Update on the Status of a Reduced Flow Test of a 10mw 700°C sCO2 Integrally Geared Compander

Experimental Investigation on Sco2-Water Heat Transfer Characteristics in A Printed Circuit Heat Exchanger with Straight Channels

A Technique for Dynamic Corrosion Testing in Supercritical CO2

Failure Mode Effects Analysis for Section III, Division 5 Class A, High Temperature Service of a Printed Circuit Heat Exchanger

NUMERICAL STUDY OF FLOW STRUCTURE AND THERMOHYDRAULIC PERFORMANCE OF SCO2 IN S-SHAPED PRINTED CIRCUIT HEAT EXCHANGER WITH LONGITUDINAL RIBS

Design and Commissioning of a 700 W@3 K Sub-cooled Helium Test Facility