Abstract:As one of the most widely used units in water cooling systems, the closed wet cooling towers (CWCTs) have two typical counter-flow constructions, in which the spray water flows from the top to the bottom, and the moist air and cooling water flow in the opposite direction vertically (parallel) or horizontally (cross), respectively. This study aims to present a simplified calculation method for conveniently and accurately analyzing the thermal performance of the two types of counter-flow CWCTs, viz. the parallel counter-flow CWCT (PCFCWCT) and the cross counter-flow CWCT (CCFCWCT). A simplified cooling capacity model that just includes two characteristic parameters is developed. The Levenberg–Marquardt method is employed to determine the model parameters by curve fitting of experimental data. Based on the proposed model, the predicted outlet temperatures of the process water are compared with the measurements of a PCFCWCT and a CCFCWCT, respectively, reported in the literature. The results indicate that the predicted values agree well with the experimental data in previous studies. The maximum absolute errors in predicting the process water outlet temperatures are 0.20 and 0.24 °C for the PCFCWCT and CCFCWCT, respectively. These results indicate that the simplified method is reliable for performance prediction of counter-flow CWCTs. Although the flow patterns of the two towers are different, the variation trends of thermal performance are similar to each other under various operating conditions. The inlet air wet-bulb temperature, inlet cooling water temperature, air flow rate, and cooling water flow rate are crucial for determining the cooling capacity of a counter-flow CWCT, while the cooling tower effectiveness is mainly determined by the flow rates of air and cooling water. Compared with the CCFCWCT, the PCFCWCT is much more applicable in a large-scale cooling water system, and the superiority would be amplified when the scale of water distribution system increases. Without multiple iterative calculations and extensive experimental data, the simplified method could be used to effectively analyze the thermal performance of counter-flow CWCTs in operation. It is useful for optimization operation of counter-flow CWCTs such that to improve the energy efficiency of the overall cooling water system.

Studi Performa Cooling Tower berdasarkan Kualitas Air Pendingin

A survey of cooling tower water quality for condenser tube fouling potential

THE SIGNIFICANCE OF PROPER COOLING TOWER WATER TREATMENT: A CASE STUDY

Experimental Study on Effect of Water Spray Characteristics on Performance of Cooling Tower

Study on heat transfer and water saving characteristics of a new cooling tower condensation module

A comprehensive approach to cooling tower design

Analysis of Cooling Tower Fouling in Enhanced Tubes Based on the Prandtl Analogy

Thermal Calculation for Water Cooling Tower To Cool Compressor ATLAS COPCO GA 250 FF

Analysis of Ozonation Effect on Performance and Water Quality in Closed-System Cooling Tower

HEAT TRANSFER AND PSYCHOMETRIC ANALYSIS OF A COUNTER-FLOW WET COOLING TOWER

Water-saving performance study of water conservation and plume abatement device in wet mechanical draft cooling towers

Experimental Study on a Spray and Falling-Film Cooling System

Improving the efficiency of cooling towers in the water cycle

ANALISA PERFORMA HEAT EXCHANGER TIPE SHELL AND TUBE PADA PROSES PENDINGINAN PELUMAS SAG MILL DI AREA GRINDING CONCENTRATOR AREA 130 PT. AMMAN MINERAL NUSA TENGGARA

Penyisihan Kadar TDS, pH, Dan Total Coliform Dalam Pengolahan Air Hujan Menjadi Air Siap Minum

Research on water saving performance of a new type of demisting cooler for cooling towers

Experimental performance of a spray tower system for water desalination and indoor thermal comfort.

Spray cooling system design and optimization for cooling performance enhancement of natural draft dry cooling tower in concentrated solar power plants

Performance Analyses of Counter-Flow Closed Wet Cooling Towers Based on a Simplified Calculation Method

Effect of Compressor-Discharge-Cooler Heat-Exchanger Length Using Condensate Water on the Performance of a Split-Type Air Conditioner Using R32 as Working Fluid

Analisis Penyebab Over Heating Untuk Tindakan Perawatan Pada Screw Compressor Di PT. Semen Padang Unit Indarung IV