Abstract:Calculations and modeling have shown that replacing the traditional graphite anode with silicon can greatly improve the energy density of lithium-ion batteries. However, the large volume change of silicon particles and high reactivity of lithiated silicon when in contact with the electrolyte lead to rapid capacity fading during charging/discharging processes. In this report, we use specific lithium silicides (LS) as model compounds to systematically study the reaction between lithiated Si and different electrolyte solvents, which provides a powerful platform to deconvolute and evaluate the degradation of various organic solvents in contact with the active lithiated Si-electrode surface after lithiation. Nuclear Magnetic Resonance (NMR) characterization results show that a cyclic carbonate such as ethylene carbonate is chemically less stable than a linear carbonate such as ethylmethyl carbonate, fluoroethylene carbonate, and triglyme as they are found to be more stable when mixed with LS model compounds. Guided by the experimental results, two ethylene carbonate (EC)-free electrolytes are studied, and the electrochemical results show improvements with graphite-free Si electrodes relative to the traditional ethylene-carbonate-based electrolytes. More importantly, the study contributes to our understanding of the significant fundamental chemical and electrochemical stability differences between silicon and traditional graphite lithium-ion battery (LIB) anodes and suggests a focused development of electrolytes with specific chemical stability vs lithiated silicon which can passivate the surface more effectively.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01151?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01151</a>.SEM data of pristine LS powders; 7Li MAS-NMR spectra of the mixture of Li7Si3 and EC; 7Li MAS-NMR data comparison of the mixture of Li7Si3 and DMC; half-cell loose-powder electrochemical test results; and first cycle differential capacity curve comparison for silicon anodes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01151/suppl_file/am1c01151_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

(Invited) A Chemical Mechanism of Carbonate Electrolyte Failure at Silicon Anode Interface for New Electrolyte Design

Artificial Solid Electrolyte Interphase to Address the Electrochemical Degradation of Silicon Electrodes

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

Selective Methylation of Cyclic Ether Towards Highly Elastic Solid Electrolyte Interphase for Silicon‐based Anodes

Understanding the Roles of Electrolyte Additives on the Surface Modification Mechanism of Silicon-Based Anodes in Lithium-Ion Batteries

Chemo-mechanical failure mechanisms of the silicon anode in solid-state batteries

Adapting Simultaneous in Operando Electrochemical Quartz Crystal Microbalance and Electrochemical Impedance Spectroscopy to Studies of Solid Electrolyte Interface Layer Formation on Amorphous Silicon Anodes

Tailoring Stress and Ion-Transport Kinetics Via a Molecular Layer Deposition-Induced Artificial Solid Electrolyte Interphase for Durable Silicon Composite Anodes

Rectifying Solid Electrolyte Interphase Structure for Stable Multi-Dimensional Silicon Anodes

Evolution of solid electrolyte interphase and active material in the silicon wafer model system

Dynamic Mechanical Equilibrium of Silicon Anodes for Lithium-ion Batteries Enabled by Surface Hydroxyl-Rich Bonding

Probing the Reactivity of the Active Material of a Li-Ion Silicon Anode with Common Battery Solvents

Unraveling the Mechanism of Phase Transformation and Structural Evolution in Si Anode with Deep-Potential Molecular Dynamics

Si Anode for All Solid State Batteries

Electrolyte Design Enabling a High‐Safety and High‐Performance Si Anode with a Tailored Electrode–Electrolyte Interphase

A Well-Defined Silicon Nanocone-Carbon Structure for Demonstrating Exclusive Influences of Carbon Coating on Silicon Anode of Lithium-Ion Batteries

Strengthening the Interfacial Stability of the Silicon-Based Electrode via an Electrolyte Additive─Allyl Phenyl Sulfone

Identification of the Solid Electrolyte Interface on the Si/C Composite Anode with FEC as the Additive

Lithium storage mechanism and progress in electrochemical modification of silicon as anode materials

Improving Electrochemical Performance of Thick Silicon Film Anodes with Implanted Solid Lithium Source Electrolyte

Designing Compatible Ceramic/Polymer Composite Solid-State Electrolyte for Stable Silicon Nanosheet Anodes