Abstract:, Page no - | ABSTRACT | PDF | FULL TEXT | e-PUB Background: The development of innovative eco-sustainable bio-nano-composites materials based on cellulose nanomaterials obtained from agricultural waste such as rapeseed plant straw and polymeric materials with improved properties. At first, cellulose was extracted from rapeseed plant straw and cellulosic and no cellulosic materials were estimated. It was found that the rapeseed plant straw contained about 43.48 wt.% cellulosic materials and 56.52 wt.% no cellulosic materials. It was also found that the rapeseed plant straw content about 34.84 wt.% α- cellulose. Then, nano-cellulose was prepared by acid hydrolysis of α -cellulose obtained from rapeseed plant straw. Poly vinyl acetate (PVAc) was prepared by soap free emulsion polymerization of vinyl monomer. Natural rubber (NR) collected as latex was oxidized by KMnO4. Blends of NR and oxidized NR with PVAc of different compositions such as NR60/PVAc40, NR40/PVAc60, ONR60/PVAc40, ONR40/PVAc60 were prepared by mixing NR latex and PVAc emulsion and followed by drying in an oven at 60°C. Composites of NR60/PVAc40 and ONR60/PVAc40 reinforced nano-cellulose (NC) were also prepared in similar way. The blends and composites were then characterized by FTIR, SEM, and Tensile test (TS). FTIR analysis confirmed the oxidation of NR and shown the variation of the functional groups in the blends and composites compared with the FTIR spectrum of NR, ONR and PVAc. SEM study exhibited that the nano-cellulose were dispersed within NR/PVAc and ONR/PVAc blends matrices with a little agglomeration. The tensile test results showed that the strength in composites was increased due to the reinforcing effect of nano-cellulose (NC). Objectives: The aim of this study is to assess the Preparation and characterization of binary blends of NR and oxidized NR with PVAc. Methods: This is an observational study. The study used to be carried out in the admitted patient’s Department of Applied Chemistry and Chemical Engineering, Islamic University, Kushtia-7003, Bangladesh. The duration of the period from Data was entered in MS Excel and Statistical analysis was done using SPSS trial version. Results: This study shows that the according to Constituent, Cellulose was 43.4822%, Alpha-Cellulose were 34.8427% and Cellulose were 8.6395%. And according to Source, Rice Straw were 32.15% %, Sugarcane were 41-43%, Rye Straw were 31.8-42.64%, Corn Stalks were 29.80% and Wheat Straw were 34-40%. Conclusion: Novel eco-friendly bio-nano-composites substances primarily based on renewable and sustainable assets namely natural rubber (NR) and nano-cellulose received from rapeseed plant straw as properly as poly vinyl acetate (PVAc) have been developed. In order to enhance the interfacial interactions amongst the composite factors such as NR, PVAc and NC, oxidation of the NR latex was once carried out by way of KMnO4 before blending mixing with PVAc emulsion and NC suspension.

ISOLATION AND CHARACTERISATION OF CELLULOSE FIBRE FROM PENNISETUM POLYSTACHION ANDITS APPLICATION IN BIOCOMPOSITES WITH ETHYLENE PROPYLENE DIENE MONOMER RUBBER

Characterisation of Nanocellulose from Waste Pisum Sativum Sheath and its Sunn Hemp Fibre-Polyester Composite: A Step Towards Valorisation of Biomass

The characterization and properties of low linear density polyethyelene (LLDPE)/ acrylonitrile butadiene rubber (NBR)/ palm press fiber (PPF) with γ-aminopropyltriethoxysilane coupling agent

Study of mechanical and electrical properties through positron annihilation spectroscopy for ethylene-propylene-diene rubber biocomposites with treated wheat husk fibers

Preparation of cellulose-PCC fibre hybrids: Use as filler in polypropylene (PP) composites

Extraction and characterization of biofiber from the Phoenix sylvestris leaf sheath biowaste for probable reinforcement in polymer composites

Facile Preparation of Cellulose Fiber Reinforced Polypropylene Using Hybrid Filler Method

Extraction of lignocellulosic fiber and cellulose microfibrils from agro waste-palmyra fruit peduncle: Water retting, chlorine-free chemical treatments, physio-chemical, morphological, and thermal characterization

Preparation and Characterization of Cellulose Nanoparticles from Agricultural Wastes and Their Application in Polymer Composites

Novel Cellulosic Natural Fibers from Abelmoschus Ficulneus Weed: Extraction and Characterization for Potential Application in Polymer Composites

Extraction of Cellulose from Soybean Hulls for the Development of Polymer Matrix Composites with Fishtail Palm Fibers

EFFECT OF CELLULOSE FIBER SURFACE TREATMENT TO REPLACE CARBON BLACK IN NATURAL RUBBER HYBRID COMPOSITES

Synthesis and characterization of cellulosic fiber from red banana peduncle as reinforcement for potential applications

Characterisation of microcrystalline cellulose from waste green pea pod sheath and its sunn hemp fibre‐polyester composite: A step towards greener manufacturing

Fabrication of ramie/hemp fibers-reinforced hybrid polymer composite—A comprehensive study on biological and structural application

Extraction of cellulose from halophytic plants for the synthesis of a novel biocomposite

Synthesis and suitability characterization of microcrystalline cellulose from Citrus x sinensis sweet orange peel fruit waste-based biomass for polymer composite applications

Synthesis and characterization of pectin biopolymer from orange peel wastes and its effect on pineapple fiber-reinforced vinyl ester composite

Comparative Study on Extraction of Cellulose Fiber from Rice Straw Waste from Chemo-Mechanical and Pulping Method

Synthesis and Characterization of Polypropylene/Ramie Fiber with Hemp Fiber and Coir Fiber Natural Biopolymer Composite for Biomedical Application