Abstract:Under low-temperature conditions in winter, asphalt pavement is prone to cracking, icing and other distresses, which affect its safety and comfort. Therefore, by incorporating phase-change materials into asphalt and conducting relevant performance studies, the aim is to alleviate low-temperature distress and regulate road surface temperature and expand the application of phase-change materials in asphalt pavement. We mixed the selected phase-change materials with different dosages into the matrix asphalt to prepare phase-change temperature-regulating asphalt and tested the four basic indicators: road performance, latent heat characteristics, temperature-regulating performance, and rheological properties of phase-change asphalt and its mixture. The research results indicate that with the increase in phase-change material content, the penetration, softening point, ductility, and dynamic viscosity of phase-change high-viscosity asphalt gradually increase. Under the constant temperature test conditions of −2.5 °C and −5 °C, the surface icing speed of asphalt binder specimens mixed with phase-change materials is slower than that of specimens without phase-change materials. Adding phase-change materials can improve the high-temperature and low-temperature PG grading of high-viscosity asphalt, effectively improving its high-temperature rutting resistance and low-temperature cracking performance. According to the temperature regulation test results, phase-change temperature-regulating asphalt has a certain regulating effect on temperature under low-temperature conditions, which can slow down the cooling rate of asphalt, reduce the thermal conductivity of permeable asphalt mixture by more than 50%, increase the temperature regulation rate by more than 30%, and improve the ice-melting and snow-melting ability by more than 20%. Phase-change materials have almost no effect on the porosity of permeable asphalt mixtures and can effectively improve the water stability, low-temperature crack resistance, and antiflying performance of permeable asphalt mixtures. Their Marshall stability and rutting stability decrease, but still meet the requirements of the specifications. Applying phase-change materials to permeable asphalt pavement can automatically adjust the temperature of the pavement, reduce the cooling rate of the asphalt pavement during cooling, alleviate the problem of snow and ice accumulation on the asphalt pavement in winter, and thereby improve the performance of permeable asphalt pavement against freeze–thaw cycles.

Multiscale evaluation on temperature adjusting performance and road performance of asphalt mixture containing dual phase change materials

Quantitative Evaluation on the Energy Saving and Emission Reduction Characteristics of Warm Mix Asphalt Mixtures

Study on Temperature Control and Anti-icing Performance of Asphalt Pavement Based on Composite Phase Change Material with Wide Phase Change Interval

Study on the Performance of Phase-Change Self-Regulating Permeable Asphalt Pavement

Study on the effect of phase change energy storage material on the performance of asphalt mixture

Evaluation of the Interaction and Aging Behavior for Asphalt Binders with Epoxy Resin and Phase Change Materials

Preparation and Experimental Study of Phase Change Materials for Asphalt Pavement

Application of phase change material in asphalt mixture – A review

Temperature responses of asphalt pavement structure constructed with phase change material by applying finite element method

Assessment of high-enthalpy composite eutectic phase change materials efficiency in asphalt binders for cooling pavements

Development of two-dimensional nano Mts/SA phase change materials for self-adjusting temperature of pavement

Research on the performance of temperature responsive asphalt mixture with thermochromic material

A review of phase change materials in asphalt binder and asphalt mixture

The State of the Art on Phase Change Material-Modified Asphalt Pavement

A novel solid–solid phase change material used to temperature regulation in asphalt mixture: preparation and properties

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Effect of polyethylene glycol/polyacrylamide graft copolymerizaton phase change materials on the performance of asphalt mixture for road engineering

Low-Temperature Performance of Asphalt Mixtures Modified by Microencapsulated Phase Change Materials with Various Graphene Contents

Study on preparation and thermal performance improvements of composite phase change material for asphalt steel bridge deck

Preparation and Performance Analysis of Ceramsite Asphalt Mixture with Phase-Change Material

Evaluation of cooling effect and pavement performance for thermochromic material modified asphalt mixtures under solar radiation