Abstract:The mean pressure distributions of a single circular cylinder in the branch of a T-junction with and without vanes are experimentally investigated in a low-speed wind tunnel. Experimental data of the circular cylinder in a straight duct are conducted to provide a benchmark. Mean pressure distributions of the circular cylinder are obtained at different positions along streamwise direction under the velocity ratio (R) ranging from 0.13 to 0.36. The detailed flow structure is observed with the help of numerical simulation validated by available experimental data. Two dimensionless parameters including correlation degree and amplitude ratio, are defined to analyze the pressure characteristics around the circular cylinder. It is found that, both the correlation degrees and the amplitude ratios increase totally with increasing distance of the circular cylinder away from the interface of the T-junction with/without vanes. Moreover, the pressure distributions around the circular cylinder in the T-junction without vanes show a double-peak type especially at a low velocity ratio, and thus present low correlation degrees compared with the benchmark, meanwhile, the amplitude ratios decrease from double to half of the benchmark level. Whereas, the pressure distributions around the circular cylinder in the T-junction with vanes show good agreement with the benchmark at a high velocity ratio. The flow structures obtained from simulation results reveal that the velocity distributions in the T-junction with vanes are more uniform than those without vanes so that the pressure distributions around the circular cylinder are much closer to the benchmark. The results would be helpful for designing the ventilation and heat transfer equipment used in high speed train.

Relation between Velocity and Pressure in Circular and Non-Circular Shape Duct for Local Exhaust Ventilation (LEV) System

CFD Analysis of the Performance of a Local Exhaust Ventilation System in a Hospital Ward

Numerical Study on the Mean Velocity Distribution Law of Air Backflow and the Effective Interaction Length of Airflow in Forced Ventilated Tunnels

Mean pressure distributions around a circular cylinder in the branch of a T-junction with/without vanes

Flow-field characteristics and ventilation performance of the high-temperature buoyant jet controlled by spray-local exhaust ventilation

Impacts of geometric configurations on performance of discharge coefficient and wall pressure of Venturi meter under high Reynolds number

A study of pressure-driven flow in a vertical duct near two current-carrying wires using finite volume technique

CFD Investigation of Ventilation Strategies to Remove Contaminants from a Hospital Room

Building ventilation: A pressure airflow model computer generation and elements of validation

Passive flow control in square duct and 90° elbow with circular turbulator at certain gaps

Study on Ventilation Performance in Operating Room with Variation Ventilation Design

Study on resistance reduction in a jugular profiled bend based on entropy increase analysis and the field synergy principle

Numerical Analysis of Lab Ventilation on Double Gaseous Polluted Sources

Reduced-scale Experimental Investigation on Ventilation Performance of a Local Exhaust Hood in an Industrial Plant

Simulation on the Effect of Local Exhaust Ventilation in Removing Surgical Smoke

Fully-Developed Convective Heat Transfer and Pressure Drop in a Square Duct With Baffle Inserts Using CFD Analysis

Air flow and gas dispersion in the forced ventilation of a road tunnel during construction

Transient cold-front-water through y-shaped aluminium ducts: nature of turbulence, non-equilibrium thermodynamics, and velocity at the converged and diverged outlets

Appropriate CFD Turbulence Model for Improving Indoor Air Quality of Ventilated Spaces

Numerical Simulation of Iaq under Up-Suction Exhaust Hood in Commercial Kitchen