Abstract:This present study focused on the synthesis of BTHAAlg and BTHAGel hybrid composites using bentonite (BT), hydroxyapatite (HA), alginate (Alg) and gelatin (Gel) materials by in situ method. The developed BTHAAlg and BTHAGel bio‐clay‐ceramic hybrid composites were utilized for methylene blue (MB) adsorption. The developed BTHAAlg and BTHAGel hybrid composites can be reusable upto five cycles. Dyeing industries release their hazardous dyeing effluents into the environment which affects the human health and ecosystem. Hence, the removal of dye from waste‐water is mandatory one. In this present study, focus on the fabrication of bio‐clay‐ceramic hybrid composites by dispersing bentonite (BT) clay and ceramic hydroxyapatite (HA) into alginate (Alg) and gelatin (Gel) polymeric matrixes by in‐situ method which gives BTHAAlg and BTHAGel hybrid composites for methylene blue (MB) removal. The various adsorption influencing parameters such as shaking time, adsorbent dosage, pH and initial MB concentration were optimized under batch method. The highest MB adsorption capacities of BTHAAlg and BTHAGel composites were found to be 43.70 and 47.50 mg/g respectively with optimized conditions of 100 mg/L of initial MB concentration, 40 min shaking time and 0.1 g dosages. In pH studies, the high MB adsorption capacity of bio‐clay‐ceramic composites were noticed at pH 11. The characterization techniques like FTIR, SEM and EDAX analysis were performed to find the physico‐chemical properties of bio‐clay‐ceramic composites. The equilibrium data of hybrid composites towards MB adsorption was well fitted with Langmuir isotherm model than D‐R and Fruendlich models because of higher r and low sd values. The negative values of ▵Go at three different temperatures (303, 313 and 323 K) indicate that the spontaneous nature of MB adsorption, while positive values of ΔHo and ΔSo revealed that the MB adsorption onto hybrid composites was endothermic in nature and more randomness occurred at solid/liquid interfaces. In kinetic studies, the MB adsorption onto hybrid composites was well fitted with pseudo‐second‐order and intra‐particle diffusion models. The electrostatic attraction and hydrogen bonding plays a dominant role in MB adsorption onto BTHAAlg and BTHAGel bio‐clay‐ceramic composites. The regeneration studies proposed that the hybrid composites can be reusable upto five cycles. Hence, the developed bio‐clay‐ceramic hybrid composites were act as best adsorbents for MB removal.

Synthesis of a Green Adsorbent Surface Gels: Development of Ratio Preparation of Polymer SA/Bentonite Bead, and its Industrial Applications for Removal of Aqueous Pollutants

Preparation and Adsorption Behavior of a Cellulose‐based, Mixed‐mode Adsorbent with a Benzylamine Ligand for Expanded Bed Applications

Bentonite clay reinforced alginate grafted composite hydrogel with remarkable sorptive performance toward removal of methylene green

Efficient removal of a pharmaceutical compound on organoclay: batch experiment, DFT calculation, statistical physics, and modeling

Synthesis of geopolymer powder and beads based on red clay waste for the adsorption of methyl orange dye from aqueous solutions: Characterization, application of response surface methodology, and cost analysis

A novel approach for adsorption of organic dyes from aqueous solutions using a sodium alginate/titanium dioxide nanowire doped with zirconium cryogel beads

Studying removal of anionic dye by prepared highly adsorbent surface hydrogel nanocomposite as an applicable for aqueous solution

Highly Reusable Nano Adsorbent Based on Clay-Incorporated Hydrogel Nanocomposite for Cationic Dye Adsorption

Preparation and Adsorption Properties of Sodium Alginate/multiwalled Carbon Nanotubes Complex Gel Beads

ZnFe2O4/bentonite/polyacrylamide: Exploring structural properties for removal of Alizarin Yellow Dye and antibacterial activities

Adsorption of anionic and cationic azo dyes from wastewater using novel and effective multicomponent adsorbent

Development of a novel bionanocomposite of UiO-66/xanthan gum/alginate crosslinked by calcium chloride for azo dye removal: Insight into adsorption kinetics, isotherms, and thermodynamics

Alginate/clinoptilolite beads as a novel adsorbent for reducing the salinity of industrial wastewater: adsorption kinetics and isotherm study

Application of a novel sodium alginate-graft-poly(methacrylic acid-co-acrylamide)/montmorillonite nanocomposite hydrogel for removal of malachite green from wastewater

Synthesis and application of SBA-15 adsorbent for the removal of organic and inorganic substances

Facile synthesis and optimization of Acacia senegal gum hydrogel for kinetically treated adsorptive removal of targeted industrial effluents

Tailored Natural Polysaccharides Beads as Green Sorbents for Efficient Lysozyme Adsorption

Synthesis of high-porosity hybrid geopolymer/alginate adsorbent for effective removal of methylene blue and optimization of parameters using RSM

Substantial increase in adsorption efficiency of local clay-alginate beads toward methylene blue impregnated with SDS

Facile preparation of sodium alginate gel beads enhanced by polyamino-modified 3D carbon for efficient remediation of organic dyes in wastewater

Facile Fabrication of Hydroxyapatite and Bentonite Encapsulated Biopolymeric Hybrid Composites for Selective Removal of Methylene Blue