Abstract:Thermal hotspots cause excessive localized temperature rise, leading to significant temperature gradients across the microprocessor, which is the primary reason for its inadequate performance and early failure. This study proposes microchannel-pinfin hybrid heat sinks incorporating twisted and non-twisted pinfins of various cross-sectional shapes (hexagonal, pentagonal, square, and triangular) to demonstrate energy-efficient hotspot mitigation in a microprocessor with highly non-uniform power distribution. Microchannels and pinfins are positioned at low- and high-heat-flux zones, respectively, to reduce the temperature variations utilizing their unequal heat transfer capabilities. Here, high- and low-heat-flux zones represent the microprocessor-core area (hotspot) and remaining chip area (background zone), characterized by heat fluxes of 300 W/cm 2 and 50 W/cm 2 , respectively. The pinfin twisting angle varies from 0° to 360° at a step of 45°. Conjugate heat transfer analyses are conducted through numerical solutions of the continuity, Navier-Stokes, and energy equations. The performance of the proposed hybrid heat sinks is compared with the non-hybrid (NH) and hybrid circular pinfins (HCP) heat sinks at Re = 120–440. The hybrid heat sink featuring triangular pinfins twisted at 225° angle (HTP-225) exhibits a remarkable reduction of 48.2 % in the total thermal resistance ( R th ) and 58.4 % in the temperature non-uniformity ( δ T,bs ) as compared to the NH heat sinks at Re = 440. Compared to the HCP design, the HTP-225 design shows 26.9 % and 35.8 % lower R th and δ T,bs , respectively. Moreover, the HTP-225 heat sink outperforms the NH heat sink with 46.0 % and 57.0 % lower R th and δ T,bs , respectively, at an equal pumping power of 18.6 mW. Furthermore, the HTP-225 heat sink demonstrates a 96.4 % and 38.5 % higher critical hotspot heat flux dissipating capacity than the NH and HCP heat sinks, respectively, making it a viable and effective solution for alleviating hotspots in high-power-density devices.

A novel hybrid-composite microchannel heat sink for extreme hotspot mitigation

A novel microchannel-twisted pinfin hybrid heat sink for hotspot mitigation

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

An Experimental Study of Microchannel and Micro-Pin-Fin Based On-Chip Cooling Systems with Silicon-to-Silicon Direct Bonding.

Selecting optimal parallel microchannel configurations for active hot spot mitigation of multicore microprocessors in real time

Extremely high heat flux dissipation and hotspots removal with nature-inspired single-phase microchannel heat sink designs

Microchannel heat sinks for hotspot thermal management: achieving minimal pressure drop and maximal thermal performance

Diamond single crystal-polycrystalline hybrid microchannel heat sink strategy for directional heat dissipation of hot spots in power devices

Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance

Embedded Cooling for High-heat-flux Hotspots with Different Sizes

Efficient Thermal Management of High-Power Electronics Via Jet-Enhanced HU-type Manifold Microchannel

Optimization of Manifold Microchannel Heat Sink inside Interposer

Glacierware: Hotspot-aware Microfluidic Cooling for High TDP Chips using Topology Optimization

Jet Microchannel with Sawtooth Wall for Efficient Cooling of High-Power Electronics

Design of micro-nano structures for counter flow diverging microchannel heat sink with extraordinarily high energy efficiency

Design of Microchannel Heat Sink Using Topology Optimization for High Power Modules Cooling

Numerical Study on Hybrid Discontinuous Microchannel Heat Sink Combining Manifold with Pin Fins (DMC-MPF) for High Power Electronic Device

High performance heat sink with counter flow diverging microchannels

Optimization of Embedded Cooling for Hotspots Based on Compound Plate Thermal Spreading Model

Heat transfer enhancement using combined microchannel with vertical rectangular micro fins

Heat Dissipation Characteristics of a Jetting Staggered Microchannel for Cooling a Large-area High-performance SOC Chip