Abstract:The main purpose of this paper is to study the extraction and separation of key fragment elements based on the electrolytic refining process of spent fuel dry reprocessing. Firstly, the electrochemical mechanisms of Er(III) and Yb(III) in LiCl-KCl molten salts were investigated on W and In film electrodes with applied cyclic voltammetry (CV), square wave voltammetry (SWV) and open circuit potential (OCP) at 773 K. The results indicated that the reduction behaviour of In(III) and Yb(III) ions were a two-step transfer process and Er(III) ions was a one-step transfer process. Then, the kinetic parameters in electrochemical processes were calculated on an In electrode with different temperatures. The OCP approach was used to determine the equilibrium potential of Er(III)/Er(0) in the temperature range of 773 K∼848 K, and thermodynamic parameters of the In 3 Er alloy were provided. Based on electrochemical behaviour results, the electrochemical extraction of Er(III) and Yb(III) from LiCl-KCl-ErCl 3 molten salts and LiCl-KCl-YbCl 3 molten salts at liquid In electrodes was performed by constant potential and constant current electrolysis, respectively. The electrolysis products were determined by X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectrometry (SEM-EDS), the primary intermetallic compounds generated in the alloys were In 3 Er and In 3 Yb. The average extraction rates for Er(III) and Yb(III) were 94.70% and 96.54%, respectively, according to inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis. Er(III) and Yb(III) were selectively extracted and separated from LiCl-KCl-ErCl 3 -YbCl 3 molten salts by potentiostatic control on the basis of the previously studied Lns (Er and Yb) extraction on In electrodes. The separation rate of Er(III) and Yb(III) by electrochemical selective deposition was 94.21%.

Electrochemical Properties and Nucleation Morphology of Yttrium on Tungsten Substrate in Molten Salt

Electrochemical behavior of tungsten in the (NaCl-KCl-NaF-Na2WO4) molten salt

Investigation into cathodic reduction process of Yb(III) ion in (LiF-YbF3)eut.-Yb2O3 molten salt system

Electrochemical Behavior of Tungsten in (nacl–kcl–naf–wo3) Molten Salt

Initial Nucleation and Growth Morphology of Uranium Electrodeposited in LiCl-KCl Eutectic

Electroextraction of Ytterbium on the Liquid Lead Cathode in LiCl-KCl Eutectic

Passivation Phenomenon and Variable Properties of Ytterbium in Different Lewis Acid AlCl 3 -NaCl Melts

Investigation of Concentration-Dependence of Thermodynamic Properties of Lanthanum, Yttrium, Scandium and Terbium in Eutectic LiCl-KCl Molten Salt

Electrochemical behavior and cathodic nucleation mechanism of molybdenum ions in NaCl-KCl

Condition Dependence of Zr Electrochemical Reactions and Morphological Evolution of Zr Deposits in Molten Salt

Electrolytic Extraction of Yttrium Using Recycle Liquid Gallium Electrode from molten LiCl-KCl

Electroreduction of Gd3+on W and Zn Electrodes in LiCl–KCl Eutectic: A Comparison Study

Diffusion Coefficient of Ho3+at Liquid Zinc Electrode and Co-reduction Behaviors of Ho3+ and Zn2+ on W Electrode in the LiCl-KCl Eutectic

Electrochemical Behavior of Zirconium in the (Nacl-Kcl-naf-zro2) Molten Salt

Electrochemical Behavior of Molybdenum in (Nacl–kcl–naf-Moo3) Molten Salt

Structure and dynamics in yttrium-based molten rare earth alkali fluorides

Separation of lanthanides erbium and ytterbium on indium electrodes by modulated potential selective extraction in molten salts and a thermodynamic and kinetic analysis of the process

The Electrochemical Co-reduction of Mg-Al-Y Alloys in the LiCl-NaCl-MgCl 2 -AlF 3 -YCl 3 Melts

Thermodynamics and Kinetics Properties of Lanthanides (La, Ce, Pr, Nd) on Liquid Bismuth Electrode in LiCl-KCl Molten Salt

Electrochemical Behavior of Tb (III) in LiCl–KCl Molten Salt on Liquid Zn Electrode

The Electrode Kinetics of UCl3 in LiCl-KCl Molten Salt