Abstract:Carbon Fiber Reinforced Plastics (CFRP) are widely used in the aerospace application. However, the machining induced sub-surface damage is critical to them. Because it would significantly reduce the reliability and the service life of the components. Particularly when the cutting angle is obtuse. The main purpose of this paper is to research the effect of the cutting parameters on the sub-surface damage in machining of CFRPs with obtuse cutting angle. And the numerical simulation is an effective method to study and observe the sub-surface damage under different cutting parameters. Despite some researches have been carried out on the effects of the cutting parameters on sub-surface damage through two-dimensional cutting models of CFRPs. The out-of-plane force also has influences on the change of the depth of the subsurface damage. And the generated cutting forces are unequal under different cutting widths during the cutting of the CFRPs. Therefore, the effects of the cutting width on the sub-surface damage still need to be studied. In this paper, a three-dimensional numerical model for the orthogonal cutting of CFRPs was developed based on the AbaqusTM. And the stress-strain relationship in the out-of-plane direction when machining CFRPs was considered in this model. Particularly, the mode I fracture in the transverse direction of the CFRPs was indicated by the damage factor of the tensile failure in the transverse direction to describe the sub-surface damage. The 135o cutting of the CFRPs under different cutting widths were simulated by this model, and the change of the depth of the sub-surface damage were analyzed. In addition, the simulation results were validated by experiments. The model provides an effective method for the prediction of the sub-surface damage, which is helpful for the optimization of the design of the tool.

Finite element explicit dynamics simulation of an impact cutting mechanism analysis of Populus tomentosa branches

Numerical and Experimental Study on Deformation and Failure of Trees under High-Velocity Impact Loads

Finite Element Simulation of High-Speed Cutting

Mechanical properties of poplar (NL-3412) branches

Investigating the Dynamic Behavior of an Apple Branch-Stem-fruit Model Using Experimental and Simulation Analysis.

Analytical and Numerical Investigation on the Mechanical Behavior of Subsurface Damage During Orthogonal Cutting of Carbon Fiber Reinforced Polymer Composites

Construction of constitutive model and parameter determination of green Sichuan pepper (Zanthoxylum armatum) branches

Modeling of Dynamic Crack Branching by Enhanced Extended Finite Element Method

Study of cutting property on single factors of disc cutter

Soft Rock Cutting Mechanics Model of TBM Cutter and Experimental Research

Exploring the mechanical and morphological rationality of tree branch structure based on 3D point cloud analysis and the finite element method

Numerical Analysis of the Effects of Cutting Parameters on the Sub-Surface Damage in Machining of CFRPs

Simulation and experimental analysis of Camellia oleifera fruit shedding based on finite element explicit dynamics

An ANSYS/LS-DYNA simulation and experimental study of circular saw blade cutting system of mulberry cutting machine

Large-deformation simulations of root pull-out and breakage using material point method with a multi-level grid

Dynamic Response and Breakage of Trees Subject to a Landslide-Induced Air Blast

Research on the Carbon Fibre-Reinforced Plastic (CFRP) Cutting Mechanism Using Macroscopic and Microscopic Numerical Simulations

Application of Numerical Methods for Crashworthiness Investigation of a Large Aircraft Wing Impact with a Tree

A nonlinear elasto-plastic bond model for the discrete element modeling of woody biomass particles

The Finite Element Analysis of Orchard Mower Suspension-Based on ANSYS Workbench

Multi-scale finite element simulation on large deformation behavior of wood under axial and transverse compression conditions