Fabrication and characterization of 8YSZ ceramic based abradable seal coatings by atmospheric plasma spraying

Xiqian Zhang,Qionglian Yang,Lin Chen,Peng Song,Jing Feng

DOI: https://doi.org/10.1016/j.ceramint.2020.07.119

IF: 5.532

2020-12-01

Ceramics International

Abstract:8 wt% yttria-stabilized zirconia (8YSZ) powders are fabricated as high-temperature based materials via a solid-state reaction method and ground into spheres in this paper. Following that, 4 wt% Nickle (Ni), 4 wt% Hexagonal Boron Nitride (hBN) and 4 wt% PHB (Polyphenyl ester) are added to 8YSZ for getting 8YSZ ceramic-based abradable seal powders (8YSZ CASp). Then, the 8YSZ CASp are sprayed on the stainless steel substrate with a NiCoCrAlY transition layer by an atmospheric plasma spraying (APS) technology. The phase structure, surface morphology and the cross-section topography of the fabricated are analyzed, the indentation hardness and nano-indentation test are conducted. The experiments of 8YSZ ceramic-based abradable seal coatings (8YSZ CASc) show that the deposition efficiency and porosity are respectively 78.5% and 21.8%, the bond strength is 4.6 MPa, the cycle number of thermal shock resistance is 37 times, those parameters prove that the fabricated 8YSZ CASc are promising abradable seal coatings.

materials science, ceramics