Abstract:This work presents a computational model of a helical falling film evaporator of 13 tubes based on physical principles. The momentum and energy transfer of the system are modeled. The work aims to understand the behavior of a horizontal falling film evaporator and to improve the evaporator design by analyzing the heat transfer. In the evaporator, the wetting efficiency varies in each tube because the evaporation of the falling film is performed gradually. Therefore, the behavior of the evaporator variables, such as the wetting efficiency in each tube, is studied. Furthermore, the model granularity based on the analysis of the subcooling and saturation zones is investigated. The effect of the film breakdown onset Reynolds number and the mass flow rate on the evaporator performance is studied. This analysis shows that the maximum heat transfer rate of the simulation is reached when the falling film Reynolds numbers of the tubes are as close as possible and pass by the film breakdown onset Reynolds number value. Additionally, the results indicate that at a low mass flow rate, the heat transfer is carried out almost completely in the first five tubes, and at a higher mass flow rate, the heat transfer is more significant in the last tubes. Finally, a comparison between the evaporator of 13 tubes and an arrangement of two evaporators of five tubes each one is performed. From this analysis, the results show that the heat transfer rate of the arrangement of two evaporators is 21.16 % and 18.69 % higher than the evaporator of 13 tubes at 0.00529 and 0.00793 kg/s ⋅ m, respectively.

Falling‐film evaporators and their applications in the food industry

Effect of fouling on falling film evaporator performance in industrial conditions of fruit juice concentrate production

Experimental and numerical study of a falling film heat exchanger used in a vapour absorption refrigeration system

Thermodynamic analysis in laminar falling film evaporator

Numerical simulation and modeling of the heat and mass transfer in a grooved flat falling film evaporator

Numerical investigation of effective parameters of falling film evaporation in a vertical‐tube evaporator

Falling-film heat exchangers used in desalination systems: A review

Numerical investigation on the longitudinal distribution characteristics of falling film flow outside a vertical tube

Introducing ultrasonic falling film evaporator for moderate temperature evaporation enhancement

Experimental and Simulated Study on Mass and Heat Transfer of Falling Film Evaporator for Ammonia-Containing Wastewater

Enhancing industrial vertical falling film evaporation through modification of heat transfer surfaces – an experimental study

Modeling and simulation of a helical falling film evaporator to improve its performance and design

Testing of a Falling-Film Evaporator for Adsorption Chillers

The effect of gas streams on the hydrodynamics, heat and mass transfer in falling film evaporation, absorption, cooling and dehumidification: A comprehensive review

On falling film evaporator – A review of mechanisms and critical assessment of correlation on a horizontal tube bundle with updated development

A numerical investigation into a long tube falling film evaporator in a zero liquid discharge (ZLD) process

Falling Water Film Evaporation on Horizontal Finned Tube Arrays at Low Pressure

Numerical analysis and optimization of falling film evaporation with tangential inlet for saline wastewater treatment

Heat Transfer Analysis of Falling Film Evaporation on a Horizontal Elliptical Tube

Universal Correlation for Falling Film Evaporation on a Horizontal Plain Tube

Falling film flow and heat transfer on a horizontal tube under the shearing of vertical vapor