3-D swimming microdrone powered by acoustic bubbles

Fang-Wei Liu,Sung Kwon Cho

DOI: https://doi.org/10.1039/d0lc00976h

IF: 7.517

2021-01-01

Lab on a Chip

Abstract:The swimming microdrone can navigate with high maneuverability in 3D space powered by remote acoustic waves.

chemistry, analytical,nanoscience & nanotechnology,biochemical research methods,instruments & instrumentation, multidisciplinary

What problem does this paper attempt to address?

3-D real-time ultrasound tracking of acoustically actuated swimming microdrone

Qiyang Chen,Fang-Wei Liu,Sung Kwon Cho,Kang Kim

DOI: https://doi.org/10.1038/s41598-024-52044-0

IF: 4.6

2024-01-20

Scientific Reports

Abstract:Maneuverable microswimmers/microdrones that navigate in hard-to-reach spaces inside human bodies hold a great potential for various biomedical applications. Acoustically actuated microswimmers have already demonstrated feasibility. However, for eventual translation of this technology, a robust 3-D tracking strategy for the microswimmer is particularly required. This paper presents our lab-designed 3-D ultrasound tracking system for real-time tracking of an acoustically actuated 3-D swimming microdrone. The ultrasound tracking system utilizing two ultrasound probes, a step motor and a host controller, was built to track the 3-D arbitrary motion of the microdrone in real-time. The performance of tracking was evaluated in the benchtop experiments by comparing the reconstructed trajectories with synchronized camera recordings. The ultrasound tracking system showed high reliability, with an average error of less than 0.3 mm across six different trials when compared to camera tracking. The results demonstrated the capability of our lab-designed 3-D ultrasound tracking system in accurately tracking the undetermined motion of the acoustic actuated 3-D swimming microdrone in real-time. The developed tracking system holds promise as a potential approach for biomedical applications and could pave the way for future clinical translation of the microswimmer technology.

multidisciplinary sciences
2-D steering and propelling of acoustic bubble-powered microswimmers

Jian Feng,Junqi Yuan,Sung Kwon Cho

DOI: https://doi.org/10.1039/c6lc00431h

2016-06-21

Lab Chip

Abstract:This paper describes bi-directional (linear and rotational) propelling and 2-D steering of acoustic bubble-powered microswimmers that are achieved in a centimeter-scale pool (beyond chip level scale). The core structure of a microswimmer is a microtube with one end open in which a gaseous bubble is trapped. The swimmer is propelled by microstreaming flows that are generated when the trapped bubble is oscillated by an external acoustic wave. The bubble oscillation and thus propelling force are highly dependent on the frequency of the acoustic wave and the bubble length. This dependence is experimentally studied by measuring the resonance behaviors of the testing pool and bubble using a laser Doppler vibrometer (LDV) and by evaluating the generated streaming flows. The key idea in the present 2-D steering is to utilize this dependence. Multiple bubbles with different lengths are mounted on a single microswimmer with a variety of arrangements. By controlling the frequency of the acoustic wave, only frequency-matched bubbles can strongly oscillate and generate strong propulsion. By arranging multiple bubbles of different lengths in parallel but with their openings opposite and switching the frequency of the acoustic wave, bi-directionally linear propelling motions are successfully achieved. The propelling forces are calculated by a CFD analysis using the Ansys Fluent® package. For bi-directional rotations, a similar method but with diagonal arrangement of bubbles on a rectangular swimmer is also applied. The rotation can be easily reversed when the frequency of the acoustic wave is switched. For 2-D steering, short bubbles are aligned perpendicular to long bubbles. It is successfully demonstrated that the microswimmer navigates through a T-junction channel under full control with and without carrying a payload. During the navigation, the frequency is the main control input to select and resonate targeted bubbles. All of these operations are achieved by a single piezoelectric actuator.
A Real-Time 3-D Underwater Acoustical Imaging System

Yeqiang Han,Xiang Tian,Fan Zhou,Rongxin Jiang,Yaowu Chen

DOI: https://doi.org/10.1109/joe.2013.2285952

IF: 3.883

2014-01-01

IEEE Journal of Oceanic Engineering

Abstract:Real-time 3-D acoustical imaging technique is a key advance to broaden the scope and enhance the feasibility of underwater missions. In this paper, a real-time 3-D underwater acoustical imaging system to handle the actual tasks under a narrowband excitation is presented. The system consists of three parts: a transmitter, a receiving hydrophone array, and a signal processor. In this system, a distributed and parallel subarray (DPS) beamforming algorithm is proposed to process the acquired signals from a scene placed in the far field. The DPS beamforming algorithm is an approximate method for the sonar signal processing with an advantageous computational efficiency. The direct method (DM) and fast Fourier transform (FFT) beamforming are compared with DPS beamforming for the memory and computational requirements. Based on this algorithm, a prototype was developed, which has been extensively employed in the lake and sea trials. The trials demonstrate that the system can achieve the 3-D imaging of the scene and meet the real-time requirement of the underwater operations.
TJ-FlyingFish: an Unmanned Morphable Aerial-Aquatic Vehicle System

Xuchen Liu,Minghao Dou,Ruixin Yan,Dongyue Huang,Songqun Gao,Biao Wang,Jinqiang Cui,Qinyuan Ren,Lihua Dou,Zhi Gao,Jie Chen,Ben M. Chen

DOI: https://doi.org/10.1142/s230138502441019x

2024-01-01

Unmanned Systems

Abstract:In this paper, we present in this work a fairly complete process for developing an unmanned aerial–aquatic vehicle system, TJ-FlyingFish, which includes an innovative design methodology of the aerial–aquatic platform and the cross-medium localization, dynamics modeling, and flight control systems. The development faces the challenge how to manipulate locomotion effectively in both water and air which presents substantial differences in fluid properties. Additionally, there are difficulties in perception and navigation because of the discontinuity of mediums. To cope with these challenges, we designed an innovative unmanned aerial–aquatic vehicle with an optimized dual-speed and tilting propulsion configuration. The rotors/propellers operate in different ranges of rotating speed in the two different mediums, providing sufficient thrust and ensuring output efficiency. Besides, thrust vectoring is achieved by rotating each propulsion unit around its mounted arm, facilitating agile underwater cruising. Another key component of our approach is a sophisticated multi-sensor-based cross-medium localization system that combines SLAM, sensor synchronization, and data capture mechanisms, enabling seamless transitions between aerial and aquatic environments, and supporting autonomous operations. The results are fully validated through actual flight experiments.
3D steerable, acoustically powered microswimmers for single-particle manipulation

Liqiang Ren,Nitesh Nama,Jeffrey M McNeill,Fernando Soto,Zhifei Yan,Wu Liu,Wei Wang,Joseph Wang,Thomas E Mallouk,Jeffrey M. McNeill,Thomas E. Mallouk

DOI: https://doi.org/10.1126/sciadv.aax3084

IF: 13.6

2019-10-04

Science Advances

Abstract:Trapped bubbles make for fast and controllable microswimmers that can push or pull living cells in crowded microenvironments.

multidisciplinary sciences
Jellyfish-Inspired Soft Robot Driven by Fluid Electrode Dielectric Organic Robotic Actuators.

Caleb Christianson,Christopher Bayag,Guorui Li,Saurabh Jadhav,Ayush Giri,Chibuike Agba,Tiefeng Li,Michael Tolley

DOI: https://doi.org/10.3389/frobt.2019.00126

2019-01-01

Frontiers in Robotics and AI

Abstract:Robots for underwater exploration are typically comprised of rigid materials and driven by propellers or jet thrusters, which consume a significant amount of power. Large power consumption necessitates a sizeable battery, which limits the ability to design a small robot. Propellers and jet thrusters generate considerable noise and vibration, which is counterproductive when studying acoustic signals or studying timid species. Bioinspired soft robots provide an approach for underwater exploration in which the robots are comprised of compliant materials that can better adapt to uncertain environments and take advantage of design elements that have been optimized in nature. In previous work, we demonstrated that frameless DEAs could use fluid electrodes to apply a voltage to the film and that effective locomotion in an eel-inspired robot could be achieved without the need for a rigid frame. However, the robot required an off-board power supply and a non-trivial control signal to achieve propulsion. To develop an untethered soft swimming robot powered by DEAs, we drew inspiration from the jellyfish and attached a ring of frameless DEAs to an inextensible layer to generate a unimorph structure that curves toward the passive side to generate power stroke, and efficiently recovers the original configuration as the robot coasts. This swimming strategy simplified the control system and allowed us to develop a soft robot capable of untethered swimming at an average speed of 3.2 mm/s and a cost of transport of 35. This work demonstrates the feasibility of using DEAs with fluid electrodes for low power, silent operation in underwater environments.
Wafer-Scale Fabrication of Micro- to Nanoscale Bubble Swimmers and Their Fast Autonomous Propulsion by Ultrasound

Jeffrey M McNeill,Nitesh Nama,Jesse M Braxton,Thomas E Mallouk

DOI: https://doi.org/10.1021/acsnano.0c03311

IF: 17.1

2020-06-23

ACS Nano

Abstract:Fuel-free, biocompatible swimmers with dimensions smaller than one micrometer have the potential to revolutionize the way we study and manipulate microscopic systems. Sub-micrometer, metallic Janus particles can be propelled rapidly and autonomously by acoustically induced fluid streaming, but their operation at acoustic pressure nodes limits their utility. In contrast, bubble-based microswimmers have an "on board" resonant cavity that enables them to operate far from the source of acoustic power. So far, they have been fabricated by direct writing techniques that limit both their minimum dimensions and the number that can be produced. Consequently, the size scaling of the properties of bubble swimmers has not been explored experimentally. Additionally, 3D autonomous motion has not yet been demonstrated for this type of swimmer. We describe here a method for fabricating bubble swimmers in large numbers (>109) with sizes ranging from 5 μm to 500 nm without direct writing or photolithographic tools. These swimmers follow a previously proposed scaling theory and reveal useful phenomena that enable their propulsion in different modes in the same experiment: with magnetic steering, autonomously in 3D, and in frequency-specific autonomous modes. These interesting behaviors are relevant to possible applications of autonomously moving micro- and nanorobots.
Spontaneous Rising of a Whirling-Swimmer Driven by a Bubble.

Minglu Dai,Chengxu Tu,Pengfei Du,Fubing Bao,Jianzhong Lin

DOI: https://doi.org/10.1021/acs.langmuir.3c01249

IF: 3.9

2023-01-01

Langmuir

Abstract:The wind-dispersed seeds can rotate and fall like small vehicles with the help of the wind to obtain a longer propagation distance. Inspired by this, we propose a novel bubble-driven three-bladed whirling-swimmer (WS) to travel in the fluid as a vehicle. Four types of WSs with blade folding angles (φ) ranging from 10 to 60° were designed, and their swimming performance was evaluated. Regardless of the WS shape, the velocity increases linearly with φ, while the angular frequency exhibits an asymptotic value. Further, both the St and rotational energy of the WS peak at 20° ≤ φ ≤ 30° for different WS shapes as well as the vertical force and the hydrodynamic torque were solved from a proposed mechanics model. This folding angle range is unexpectedly consistent with the coning angle during maple samaras' stable falling. The WS lift and drag forces greatly depend on the interaction between the leading-edge vortex and the hub vortex. The results showed that the WS-IV seems to have the highest performance. Our work may shed new light on developing unpowered wireless swimmers of high swimming performance to provide a new way for underwater information collection, information transmission, and enhanced mixing.
Enhanced Buoyancy and Propulsion in 3d Printed Swimming Micro-Robots Based on a Hydrophobic Nano Fibrillated Cellulose Aerogel and Porous Lead-Free Piezoelectric Ceramics

Qingping Wang,Zihe Li,Chris Bowen,Charles Courtney,Min Pan,Qianqian Xu,Wenshuai Chen,Sebastian Fieldhouse,Chaoying Wan

DOI: https://doi.org/10.1016/j.nanoen.2024.110254

IF: 17.6

2024-01-01

Nano Energy

Abstract:This paper provides the first demonstration of additively manufactured swimming micro-robots which combine a hydrophobic nanofibrillated cellulose aerogel, to provide long-term buoyancy, with a low acoustic impedance porous piezoelectric ceramic for improved propulsion. The hydrophobic nanocellulose aerogel is shown to exhibit a high and stable contact angle that was maintained for extended periods of time, which facilitates long-term and stable buoyancy of the micro-robot. To quantify the benefits of introducing porosity into the active piezoelectric element, a new analysis model was developed to inform material design and maximize the acoustic propulsion force. Detailed characterisation and modelling of the swimming robots demonstrated that a swimming robot based on a lead-free porous Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) ceramic exhibited a higher acoustic radiation propulsion force and a faster swimming speed compared to a robot fabricated using a dense ceramic element. These benefits were associated with the lower elastic modulus, density and acoustic impedance of the porous piezoelectric material. The lower dielectric constant, reduced device capacitance, and lower resonant frequency of the porous piezoelectric element also significantly reduced the driving current and power requirements of the robot. This work therefore provides new insights on the impact of hydrophobic and acoustically matched piezoelectric materials on the performance of swimming micro-robots, and successfully demonstrates the use of porosity to improve acoustic impedance matching of resonant piezoelectric devices, such as micro-robots and ultrasonic transducers.
An Aerial–Aquatic Robot with Tunable Tilting Motors Capable of Multimode Motion

Kecheng Qin,Wei Tang,Yiding Zhong,Yang Liu,Huxiu Xu,Pingan Zhu,Dong Yan,Huayong Yang,Jun Zou

DOI: https://doi.org/10.1002/aisy.202300193

IF: 7.298

2023-01-01

Advanced Intelligent Systems

Abstract:Aerial–aquatic robots have promising applications due to their ability to operate in air and water with different motion modes. However, challenges such as water/air transition and multimedia movement still limit their development. Inspired by the aerial–aquatic behavior of wild ducks, an aerial–aquatic robot with tunable tilting motors and a delta wing is introduced. The robot can perform multimode motion, including flying in air, swimming on the water surface, transitioning between air and water, and diving underwater. Besides, the buoyancy design enables the robot to float at the air–water interface without consuming energy. Herein, the performance of the robot, including vertical and horizontal cross‐media performance, power consumption, and endurance in various motion modes, is evaluated. The field experiments show that the proposed robot possesses multimode motion and high maneuverability. This study provides a new idea for the structural design of next‐generation practical aerial–aquatic robots.
Multimodal Bubble Microrobot Near an Air–Water Interface

Leilei Wang,Li Chen,Xu Zheng,Zexiong Yu,Wenchao Lv,Minjia Sheng,Lina Wang,Pengcheng Nie,Hangyu Li,Dongshi Guan,Haihang Cui

DOI: https://doi.org/10.1002/smll.202203872

IF: 13.3

2022-09-02

Small

Abstract:Multimodal swimming microrobots are shown using a soft "bubble tentacle" to work, based on an intriguing mechanism of the microbubble cavitation‐induced‐jet near the air–liquid interface. This bubble microrobot manifests high controllability and great maneuverability: easy control either by a gamepad or program, remote speed modulation without changing fuel, convenient switch among different working modes, and near or far field manipulation of multiple targets. The development of multifunctional and robust swimming microrobots working at the free air–liquid interface has encountered challenge as new manipulation strategies are needed to overcome the complicated interfacial restrictions. Here, flexible but reliable mechanisms are shown that achieve a remote‐control bubble microrobot with multiple working modes and high maneuverability by the assistance of a soft air–liquid interface. This bubble microrobot is developed from a hollow Janus microsphere (JM) regulated by a magnetic field, which can implement switchable working modes like pusher, gripper, anchor, and sweeper. The collapse of the microbubble and the accompanying directional jet flow play a key role for functioning in these working modes, which is analogous to a "bubble tentacle." Using a simple gamepad, the orientation and the navigation of the bubble microrobot can be easily manipulated. In particular, a speed modulation method is found for the bubble microrobot, which uses vertical magnetic field to control the orientation of the JM and the direction of the bubble‐induced jet flow without changing the fuel concentration. The findings demonstrate a substantial advance of the bubble microrobot specifically working at the air–liquid interface and depict some nonintuitive mechanisms that can help develop more complicated microswimmers.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A novel miniature swimmer propelled by 36° Y-cut lithium niobate acoustic propulsion system

Deqing Kong,Takumi Hirata,Fei Li,Minoru Kuribayashi Kurosawa,Manabu Aoyagi

DOI: https://doi.org/10.1016/j.sna.2023.114837

2024-01-01

Abstract:Self-propelled swimmers using ultrasonic transducers have been proposed and studied. The screw and bionic propulsion systems have dominated underwater robots. However, the complex structures make miniaturization difficult. The swimmers with ultrasonic transducers have no moving parts such as fins or propellers and can be driven by the nanomechanical-vibration in the surface of the transducer. Simple structure and high driving frequency make it easy to miniaturize. A 36° Y-cut lithium niobate (LN) thickness-vibration-mode transducer is used to investigate an underwater acoustic propulsion system. LN transducers are manufactured to 10 × 10 mm, 7 × 7 mm, and 4 × 4 mm square plates. The zero-speed propulsion and no-load speed are investigated to evaluate the swimmer performance. A mm-order swimmer is studied with a 4 × 4 mm LN transducer. At last, the multi-degrees-of-freedom swimmer driven by three 7 × 7 mm LN transducers is demonstrated with the advance and sway locomotion. In the future, a small-scale and agile self-propelled swimmer with an acoustic propulsion system can be expected for narrow and complex environment tasks, such as seagrass-prone areas and narrow pipelines.

engineering, electrical & electronic,instruments & instrumentation
Backswimmer Inspired Miniature Robot with Buoyancy Auto-Regulation through Controlled Nucleation and Release of Microbubbles

Dror Kobo,Bat-El Pinchasik

DOI: https://doi.org/10.48550/arXiv.2111.09648

2021-11-18

Abstract:The backswimmer fly is an aquatic insect, capable of regulating its buoyancy underwater. Its abdomen is covered with hemoglobin cells, used to bind and release oxygen, reversibly. Upon entering water, the fly entraps an air bubble in a superhydrophobic hairy structure on its abdomen for respiration. This bubble, however, can change its volume through regulated oxygen flow from the abdominal hemoglobin cells. In this way, it can reach neutral buoyancy without further energy consumption. In this study, we develop a small, centimeter scale, backswimmer inspired robot (BackBot) with auto-buoyancy regulation through controlled nucleation and release of microbubbles. The bubbles nucleate and grow directly on onboard electrodes through electrolysis, regulated by low voltage. We use 3D printing to introduce a three-dimensional bubble-entrapping cellular structure, in order to create a stable external gas reservoir. To reduce buoyancy forces, the bubbles are released through linear mechanical vibrations, decoupled from the robot's body. Through pressure sensing and a Proportional Integral Derivative control loop mechanism, the robot auto-regulates its buoyancy to reach neutral floatation underwater within seconds. This mechanism can promote the replacement of traditional and physically larger buoyancy regulation systems, such as pistons and pressurized tanks, and to enable the miniaturization of Autonomous Underwater Vehicles.

Robotics
Near-infrared-laser-navigated dancing bubble within water via a thermally conductive interface

Man Hu,Feng Wang,Li Chen,Peng Huo,Yuqi Li,Xi Gu,Kai Leong Chong,Daosheng Deng

DOI: https://doi.org/10.1038/s41467-022-33424-4

2022-09-30

Abstract:Precise manipulation of droplets or bubbles hosts a broad range of applications for microfluidic devices, drug delivery, and soft robotics. Generally the existing approaches via passively designing structured surfaces or actively applying external stimuli, inherently confine their motions within the planar or curved geometry at a slow speed. Consequently the realization of 3D manipulation, such as of the underwater bubbles, remains challenging. Here, during the near-infrared-laser impacting on water, by simply introducing a thermally conductive interface, we unexpectedly observe a spontaneously bouncing bubble with hundreds-of-micrometer diameter at tens-of-Hertz frequency. The unique formation of temperature inversion layer in our system generates the depth-dependent thermal Marangoni force responsible for the bouncing behavior. Both the scaling analysis and numerical simulation agree with observations quantitatively. Furthermore, by controlling the navigation speed of the laser beam, the bubble not only shows excellent steerability with velocity up to 40 mm/s, but also exhibits distinctive behaviors from bouncing to dancing within water. We demonstrate the potential applications by steering the bubble within water to specifically interact with tiny objects, shedding light on the fabrication of bubble-based compositions in materials science and contamination removal in water treatment.
Cross-Medium Communication Combining Acoustic Wave and Millimeter Wave: Anechoic Pool, Lake, Swimming Pool Experiments

Jingyu Qian,Xuesong Lu,Minhao Zhang,Fengzhong Qu,Yan Wei

DOI: https://doi.org/10.1109/OCEANSLimerick52467.2023.10244410

2023-01-01

Abstract:A cross-medium communication can be accomplished by using acoustic waves to induce vibrations on the water surface, which can then be detected by airborne radars. Using this method, it is possible to communicate without relay between underwater and air-borne devices, which sheds the light on a wide variety of potential applications. However, few theoretical and experimental studies on it are found. Since 2019, we have developed theoretical studies on this topic and conducted experiments in lakes, swimming pools, and anechoic pools. Further, we investigated the impact of various factors on communication from our experimental results. These factors included: the frequency, bandwidth, and modulation of the communication signals, the number and depth of underwater sources, the location and height of the radar, and water surface waves in the surrounding environment. In this paper, we describe the experimental system and based on the experimental results, analyze the impacts of the above factors on cross-medium communication. All of these studies are expected to lay a basis for future cross-medium communication applications.
Underwater Target Tracking in Three Dimensional Space Based on Sound Speed Profile

Yan Li,Wenliang Wang,Meiqin Liu,Senlin Zhang,Jian Lan

DOI: https://doi.org/10.23919/chicc.2019.8865326

2019-01-01

Abstract:At present, due to inaccurate models of environmental noise and lack of prior knowledge. most tracking algorithms are non-iterative. Moreover, most underwater tracking algorithms do not consider the influence of sound velocity on ray trajectory. As a result, many algorithms are ineffective in a real underwater environment. In order to solve the above problems, we use measured data and consider the special underwater environment characteristics to build a sound propagation model. Through this model, time of flight (ToF), and traveling distance of sound can be calculated. Then, in order to combine the advantages of iterative and non-iterative algorithms, we propose an improved underwater tracking algorithm. A minimum residual localization algorithm based on particle swarm optimization. which is a non-iterative algorithm, is modified to adapt to the underwater environment. In the end, a data fitting strategy is adopted to convert the non-iterative algorithm into an iterative one without knowledge of environmental noise. Hence, the historical information can be used to improve the accuracy of the non-iterative algorithm significantly. Simulations show that our method possesses the merit of higher precision and broader adaptability in comparison with other techniques.
A multi-band stealth and anti-interference superspeed light-guided swimming robot based on multiscale bicontinuous three-dimensional network

Zhen Ling,Jiali Chen,Shangjing Li,Haitong Lu,Jiang Du,Zunfeng Liu,Jun Qiu

DOI: https://doi.org/10.1016/j.cej.2024.150094

IF: 15.1

2024-02-01

Chemical Engineering Journal

Abstract:Light-guided swimming robots with ultra-high moving speed, multi-band electromagnetic absorption and strong anti-interference capabilities can achieve excellent danger avoidance and rapid escape ability, electromagnetic stealth and covert information transmission. Despite their strong survivability, there are presently no reports of such robots. The challenge lies in regulating the material structure to make it has high photothermal conversion efficiency to generate superspeed driving forces, and the ability to selective absorption, amplification, and shielding of radio waves, microwaves, terahertz wave. To address this, we developed a novel composite with a multilevel bicontinuous three-dimensional network for swimming robots. This swimming robot has ultra-high photothermal conversion efficiency and superspeed moving performance under laser irradiation, achieving a maximum velocity of 19.2 mm·s−1. Additionally, it can achieve multi-functional sports such as weight bearing, pushing objects and obstacle avoidance. In terms of electromagnetic stealth, it has the minimum reflection loss of −51.0 dB and the effective absorption bandwidth of 7.4 GHz in the microwave band. It also has the maximum RL of 77.1 dB in the terahertz band. Moreover, this swimming robot realizes metamaterial characteristics in the radio band, engendering superb anti-interference capabilities. This multi-functional swimming robot pioneers design concepts for next-generation intelligent and dexterous light-guided soft robots.

engineering, chemical, environmental
An acoustically controlled helical microrobot

Yong Deng,Adrian Paskert,Zhiyuan Zhang,Raphael Wittkowski,Daniel Ahmed

DOI: https://doi.org/10.1126/sciadv.adh5260

IF: 13.6

2023-09-22

Science Advances

Abstract:As a next-generation toolkit, microrobots can transform a wide range of fields, including micromanufacturing, electronics, microfluidics, tissue engineering, and medicine. While still in their infancy, acoustically actuated microrobots are becoming increasingly attractive. However, the interaction of acoustics with microstructure geometry is poorly understood, and its study is necessary for developing next-generation acoustically powered microrobots. We present an acoustically driven helical microrobot with a length of 350 μm and a diameter of 100 μm that is capable of locomotion using a fin-like double-helix microstructure. This microrobot responds to sound stimuli at ~12 to 19 kHz and mimics the spiral motion of natural microswimmers such as spirochetes. The asymmetric double helix interacts with the incident acoustic field, inducing a propulsion torque that causes the microrobot to rotate around its long axis. Moreover, our microrobot has the unique feature of its directionality being switchable by simply tuning the acoustic frequency. We demonstrate this locomotion in 2D and 3D artificial vasculatures using a single sound source.

multidisciplinary sciences
3D Printed Swordfish‐Like Wireless Millirobot

Xingcheng Ou,Yu Sheng,Jiaqi Huang,Dantong Huang,Xiaohong Li,Ran Bi,Guoliang Chen,Weijie Hu,Shuang‐Zhuang Guo

DOI: https://doi.org/10.1002/aisy.202400206

IF: 7.298

2024-07-10

Advanced Intelligent Systems

Abstract:Using novel materials, fabrication methods, and driving modes, Shuang‐Zhuang Guo and co‐workers developed a magnetically controlled bionic fish millirobot with complex 3D geometry and biomimetic motion, enabling fast straight swimming and adjustable turning radii. Inspired by the efficient swimming capabilities of swordfish, a novel wireless soft swordfish‐like robot with programmable magnetization has been developed, integrating direct‐ink‐writing (DIW) 3D printing and assembly technology. This 20 mm long robot features a streamlined form and magnetically programmable movements, enabling biomimetic locomotion patterns such as straight‐line swimming and turning swimming. The robot includes a silicone‐based torso (body, abdomen, and pectoral fin) and a crescent‐shaped tail fin made from a magnetically programmable polymer embedded with neodymium‐iron‐boron (NdFeB) particles. The tail fin, fabricated by multi‐material alternating printing to achieve a gradient magnetism distribution, is controlled by an external magnetic field to mimic the rapid oscillation of a swordfish's tail, achieving a swimming speed of 0.51 BL/ s. The tail fin's asymmetric oscillation amplitudes, adjusted by magnetic field control, allow the robot to transition seamlessly from high‐speed straight swimming to agile turning. The robot can perform tracking swimming along specific planned paths, such as "C" and "Z" shaped trajectories. Potential applications include environmental monitoring and targeted drug release. The multi‐material 3D printing technology enhances the robot's efficiency and sensitivity in simulating natural biological movements, extending to the design and development of various flexible devices and soft robots.
Backswimmer-inspired intelligent diving devices for water and wave-energy exploitation in the ocean

Jia-Min Wu,Yu-Qiong Luo,Fei Song,Zheng-Hong Liang,Dong Li,Xiu-Li Wang,Yu-Zhong Wang

DOI: https://doi.org/10.1016/j.matt.2023.01.032

IF: 18.9

2023-02-28

Matter

Abstract:Fresh water and energy supplies are two main themes for global sustainable development. As the largest resource storehouse, the ocean has massive seawater and inexhaustible tidal energy. Exploration and utilization of ocean resources have become an inevitable trend; however, current ocean-exploring equipment mostly works with postures of floating, suspending, and deep diving. Considering important demands of signal transmission, energy acquisition, and working secrecy, developing intelligent devices that can dive just underneath water surfaces requires significant concerns. Learning from elegant postures of aquatic insect backswimmer, here, we demonstrate an intelligent underwater device with controlled diving postures and depths regardless of different water environments. Further, potential applications of the device are exhibited in terms of solar steam generation, water-wave sensing, and wave-energy collection. These findings can improve the understanding of natural interface phenomena and offer protocols to design autonomous interface locators, diving miniature robots, and more smart devices for ocean-resource exploitation.

materials science, multidisciplinary

3-D swimming microdrone powered by acoustic bubbles

3-D real-time ultrasound tracking of acoustically actuated swimming microdrone

2-D steering and propelling of acoustic bubble-powered microswimmers

A Real-Time 3-D Underwater Acoustical Imaging System

TJ-FlyingFish: an Unmanned Morphable Aerial-Aquatic Vehicle System

3D steerable, acoustically powered microswimmers for single-particle manipulation

Jellyfish-Inspired Soft Robot Driven by Fluid Electrode Dielectric Organic Robotic Actuators.

Wafer-Scale Fabrication of Micro- to Nanoscale Bubble Swimmers and Their Fast Autonomous Propulsion by Ultrasound

Spontaneous Rising of a Whirling-Swimmer Driven by a Bubble.

Enhanced Buoyancy and Propulsion in 3d Printed Swimming Micro-Robots Based on a Hydrophobic Nano Fibrillated Cellulose Aerogel and Porous Lead-Free Piezoelectric Ceramics

An Aerial–Aquatic Robot with Tunable Tilting Motors Capable of Multimode Motion

Multimodal Bubble Microrobot Near an Air–Water Interface

A novel miniature swimmer propelled by 36° Y-cut lithium niobate acoustic propulsion system

Backswimmer Inspired Miniature Robot with Buoyancy Auto-Regulation through Controlled Nucleation and Release of Microbubbles

Near-infrared-laser-navigated dancing bubble within water via a thermally conductive interface

Cross-Medium Communication Combining Acoustic Wave and Millimeter Wave: Anechoic Pool, Lake, Swimming Pool Experiments

Underwater Target Tracking in Three Dimensional Space Based on Sound Speed Profile

A multi-band stealth and anti-interference superspeed light-guided swimming robot based on multiscale bicontinuous three-dimensional network

An acoustically controlled helical microrobot

3D Printed Swordfish‐Like Wireless Millirobot

Backswimmer-inspired intelligent diving devices for water and wave-energy exploitation in the ocean