Abstract:An embedded shape memory alloy (SMA) wire actuated biomimetic fin is presented, and based on this module for biomimetic underwater propulsion, a micro robot fish ( 146 mm in length, 30 g in weight) and a robot squid ( 242 mm in length, 360 g in weight) were developed. Fish swim by undulating their body and/or fins. Squid and cuttlefish can also swim by undulating their fins. To simplify engineering modeling, the undulating swimming movement is assumed to be the integration of the movements of many flexible bending segments connected in parallel or in series. According to this idea, a biomimetic fin which can bend flexibly was developed. The musculature of a cuttlefish fin was investigated to aid the design of the biomimetic fin. SMA wires act as 'muscle fibers' to drive the biomimetic fin just like the transverse muscles of the cuttlefish fin. During the bending phase, elastic energy is stored in the elastic substrate and skin, and during the return phase, elastic energy is released to power the return movement. Theorem analysis of the bending angle was performed to estimate the bending performance of the biomimetic fin. Experiments were carried out on single-face fins with latex rubber skin and silicone skin (SF-L and SF-S) to compare the bending angle, return time, elastic energy storage and reliability. Silicone was found to be the better skin. A dual-face fin with silicone skin (DF-S) was tested in water to evaluate the actuating performance and to validate the reliability. Thermal analysis of the SMA temperature was performed to aid the control strategy. The micro robot fish and robot squid employ one and ten DF-S, respectively. Swimming experiments with different actuation frequencies were carried out. The speed and steering radius of the micro robot fish reached 112 mm s(-1) and 136 mm, respectively, and the speed and rotary speed of the robot squid reached 40 mm s(-1) and 22. s(-1), respectively.

3D Printed Swordfish‐Like Wireless Millirobot

Design and implementation of a biomimetic robotic fish with 3D locomotion

Fast-moving Soft Electronic Fish

Bio-inspired Rigid-Soft Coexisting Robotic Fish

Carangiform‐Like Magnetic Milliswimmer With Negative Buoyancy for Agile 3D Navigation in Confined Fluid Environments

Design, Simulation, and Experimental Investigation on a Novel Robot Fish Driven by Piezoelectric Bimorphs

3D Printing: 3d‐printed Artificial Microfish (adv. Mater. 30/2015)

Magnetically Propelled Fish-Like Nanoswimmers

3D‐printed Artificial Microfish

Applying Central Pattern Generators to Control the Robofish with Oscillating Pectoral Fins.

Fast-Swimming Soft Robotic Fish Actuated by Bionic Muscle

A micro-robot fish with embedded SMA wire actuated flexible biomimetic fin

Robot Fish with A Novel Biomimetic Wire-Driven Flapping Propulsor

Development of a Novel Underactuated Robotic Fish with Magnetic Transmission System

FULL PAPER Robot Fish with a Novel Biomimetic Wire-Driven Flapping Propulsor

A magnetically controlled soft miniature robotic fish with a flexible skeleton inspired by zebrafish

Nanorobots: Magnetically Propelled Fish‐Like Nanoswimmers (small 44/2016)

Embedded SMA wire actuated biomimetic fin: a module for biomimetic underwater propulsion

Basic design of a biomimetic underwater soft robot with switchable swimming modes and programmable artificial muscles

A multi-stimulus-responsive bionic fish microrobot for remote intelligent control applications.

A novel underactuated wire-driven robot fish with vector propulsion