Abstract:In milling of thin-walled structures such as impellers or blisks, critical workpiece vibrations occur due to the excitation by the cutting forces and the dynamic interface between the workpiece and the fixture. Vibrations may cause instable state of the milling process, thus decreasing the production outcome by causing rejects. In respect to the milling process of thin-walled workpiece, a challenging task is to monitor the critical vibrations occurred in the workpiece itself or the contact surface between the workpiece and the clamping system. Vibrations can be reflected in the clamping system, and thus the clamping force variation monitoring is a potential scenario or solution to the challenging task. This article introduces a measurement prototype for the real-time dynamic clamping force monitoring. With respect to the measurement of clamping force, two case studies are carried out by a direct sensing method with PVDF thin-film sensors. In the first study, the measurement prototype with embedded PVDF sensors is located on the dynamometer, and an additional eddy-current transducer is applied for monitoring the workpiece deflection during the milling process. Deflection signals and cutting force signals from dynamometer are used as two referential signals to demonstrate the reliability of the prototype with embedded PVDF sensors. In the second study, milling test with the same tool and workpiece is implemented with only PVDF sensors monitoring. Dynamic clamping signal varying with different cutting durations in time, frequency, and time-frequency domain and different milling surface results is performed. Relationship between the collected signals and machining results is preliminarily analyzed. Case studies with thin-walled workpiece show the performance of the measurement prototype.

Tool condition monitoring in an end-milling operation based on the vibration signal collected through a microcontroller-based data acquisition system

An Integrated Wireless Vibration Sensing Tool Holder for Milling Tool Condition Monitoring

An Embedded Tool Condition Monitoring System for Intelligent Machining

A Machine Vision System for Micro-Milling Tool Condition Monitoring

Embedded Tool Condition Monitoring for Intelligent Machining

Vibration Energy-Based Indicators for Multi-Target Condition Monitoring in Milling Operations

Model-driven condition monitoring and diagnosis in digital machining process

Monitoring Built-Up Edge, Chipping, Thermal Cracking, and Plastic Deformation of Milling Cutter Inserts through Spindle Vibration Signals

Condition Monitoring of Cutting Tools by Feature Analysis of Vibro-Acoustic Sensing Signals

Tool wear monitoring of micro-milling operations

Application of measurement systems in tool condition monitoring of Milling: A review of measurement science approach

Tool Wear Monitoring in CNC Milling Process Based on Vibration Signals from an On-Rotor Sensing Method

Machining Vibration Monitoring Based on Dynamic Clamping Force Measuring in Thin-Walled Components Milling

Multi-Sensory Tool Holder for Process Force Monitoring and Chatter Detection in Milling

Noise-Robust Tool Condition Monitoring in Micro-milling with Hidden Markov Models

Research On Vibration Measurement System For Micro-Milling Machine

Review of tool condition monitoring methods in milling processes

Review of Advances in tool condition monitoring techniques in the milling process

Application of audible sound signals for tool wear monitoring using machine learning techniques in end milling

Development of a Data Acquisition and Condition Monitoring System for Machine Equipment

Tool condition monitoring in micro milling of brittle materials