Abstract:Overhead high-voltage transmission lines (HVTLs) extend over diverse geographic regions under uneven weather conditions, where sag and wind-induced conductor motion poses serious issues for uninterrupted power distribution by HVTLs. Sag reduces the ground clearance of the line, whereas conductor motion may result in phase to phase short circuit, and damage to support structure. A real-time estimate of these factors is deemed important to develop requisite prevention measures. In this paper, we present a novel method to cater for sag and motion estimation in real-world scenarios. Our method can detect a change in sag and conductor motion, whether it is symmetrical or unsymmetrical to one or more conductors. We require uniaxial magnetic-field (MF) sensors mounted at support tower, equal to conductors, and synchronized with current-transformer (CT) data at substation. The sensors provide noncontact MF measurements, which are time stamped and transmitted to the substation. The data are then simultaneously processed along with electric current readings from the CT. For processing, we developed a unified algorithm that first distinguishes variation in sag from motion in conductor. Then, it estimates the corresponding sag or motion in any of the conductors. The method is verified first by numerical simulations, and then with a scaled setup in laboratory. Different test cases were identified by the algorithm. Error remains <= 1% for unsymmetrical sag estimation. In addition, trajectory of a conductor in motion is retrieved. Where the root mean square error between actual and retrieved conductor amplitude was only 0.0833 for the observation window of 200 ms.

A Hybrid Framework Combining Data-Driven and Catenary-Based Methods for Wide-Area Powerline Sag Estimation

Electric Load Modeling for Wide Area Power Systems

Research on Arc Sag Measurement Methods for Transmission Lines Based on Deep Learning and Photogrammetry Technology

Estimation of Current and Sag in Overhead Power Transmission Lines with Optimized Magnetic Field Sensor Array Placement

Analysis of Non-Contact Measurement Methods for Sag of Overhead Transmission Lines

On Real-Time Detection of Line Sags in Overhead Power Grids Using an IoT-Based Monitoring System: Theoretical Basis, System Implementation, and Long-Term Field Verification

Sag Monitoring of Transmission Line Based on Motion Sensor

Sag Source Location and Type Recognition Via Attention-based Independently Recurrent Neural Network

Estimating Sag and Wind-Induced Motion of Overhead Power Lines with Current and Magnetic-Flux Density Measurements

Computational Analysis of Reconstructing Current and Sag of Three-Phase Overhead Line Based on the TMR Sensor Array

Multi-Sensor Fusion and Data Analysis for Operating Conditions of Low Power Transmission Lines

Current Reconstruction and Sag/Wind Deflection Monitoring of Transmission Lines by Magnetic Sensing

Calculation Methods of High-Voltage Direct Current (HVDC) Line Sag Considering Meteorology

A Novel Voltage Sag Detection Method Based on a Selective Harmonic Extraction Algorithm for Nonideal Grid Conditions

Voltage sag source location based on sag event amplitude information

A Novel Method to Reconstruct Overhead High-Voltage Power Lines Using Cable Inspection Robot LiDAR Data

Approximate Magnetic Flux Density Model of Overhead Power Lines for Conductor Sag Estimation

Simulation and Analysis of Arc-drop Deformation of High-voltage Cables with Three-dimensional Laser Scanning Point Cloud

Method for Dealing With Sag in Electromagnetic Transient Simulation of Overhead Line

Voltage Sag Diagnosis Using Big Data Analysis

A Robust Model Fitting-based Method for Transmission Line Extraction from Airborne LiDAR Point Cloud Data