Abstract:Epoxidation-esterification of fatty acid methyl ester obtained from Terminalia catappa L. kernel oil (TCKO), its characterization, kinetics and thermodynamics were the main focus of this study. The methyl ester obtained via base catalyzed transesterification was used for epoxidation-esterification modification process. Epoxidation kinetics and thermodynamics parameters were also investigated. The properties of the TCKO and epoxidized-esterified Terminalia catappa L. kernel oil methyl ester (MTCKOe) were determined using standard methods. MTCKOe was analyzed using Dissolved Gas Analysis equipment, so as to determine its constituent gases compositions. The order 10−5Lmol−1s−1 and 39.97 KJ/mol were the respective rate constant K and activation energy Ea, obtained for the epoxidation process. ΔG, ΔH, and ΔS values for the epoxidation process were (136.00–148.82 kJ mol−1), 37.24 kJ mol−1, and −320.64 J mol−1 K−1, respectively, indicating non-spontaneous, endothermic, and endergonic process. The properties of MTCKOe sample were: -8°C, 280°C, 820 Kg/dm3, 8.56 mm2/s, 0.80 mgKOH/g, 0.65 mg/Kg and 50.05 KV for pour point, flash point, density, viscosity, acid value, moisture content and dielectric strength, respectively. The dissolved gas analysis result (in ppm) of the key gases for MTCKOe sample are: <5, 87, 1441, <1, 6, 84, 3, <0.5 for H2, H2O, CO2, CO, C2H4, C2H6, CH4, C2H2, respectively. The characteristics met acceptable standard limits. The MTCKOe properties indicated its possible use as bio-transformer oil.

Mass transfer and reaction rate parameters for the in-situ epoxidation of tamanu oil

Mass Transfer and Reaction Kinetics of Soybean Oil Epoxidation in a Formic Acid‐autocatalyzed Reaction System

Effect of Gas-Liquid Mass Transfer on P-Xylene Oxidation

Macroscopic Kinetics Modelling of Liquid–liquid Reaction System: Epoxidation of Fatty Acid Methyl Esters

Influence of Gas-liquid Mass Transfer on the P-Xylene Liquid-phase Catalytic Oxidation

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Kinetics and reactor modelling of fatty acid epoxidation in the presence of heterogeneous catalyst

Sustainable approach for catalytic green epoxidation of oleic acid with applied ion exchange resin

Sustainable epoxidation of sunflower oil via heterogenous catalytic in situ peracids mechanism

Synergistic catalytic epoxidation of palm stearin applied by in situ peracid mechanism

Catalytic epoxidation of palm oleic acid by heterogeneous catalysts: Optimization and kinetic model

Improving efficiency and reducing enzyme inactivation during lipase-mediated epoxidation of α-pinene in a double-phase reaction system

Chemical modification of Terminalia catappa L. kernel oil methyl ester using epoxidation-esterification approach, for application as bio-transformer fluid – Physicochemical characterization, kinetics and thermodynamics

Feasibility studies on Kinetics, thermodynamics, thermal analysis and physicochemical Characterization of Anacardium occidentale kernel oil methyl ester epoxidation-esterification, for use as bio-transformer fluid

Novel Packed Bed Reactor Designed for Prileschajew Epoxidation of Fatty Acid Methyl Ester: Intensification of Mass/heat Transfer

Reaction Thermodynamic and Kinetics for Esterification of 1-Methoxy-2-Propanol and Acetic Acid over Ion-Exchange Resin

In Situ Epoxidation of Hybrid Oleic Acid Derived from Waste Palm Cooking Oil and Palm Oil with Applied ZSM-5 Zeolite as Catalyst

Esterification of High-Acid Value Oil

Liquid–Liquid Equilibrium for Systems Containing Epoxidized Oils, Formic Acid, and Water: Experimental and Modeling

Epoxidation of Fatty Acid Methyle Ester with hydrodynamic cavitation technology

Chemical modification of linoleic acid via catalytic epoxidation of corn oil: A sustainable approach