Abstract:Each year, an enormous number of tires approach the end of their useful lives, posing threats to human health and the environment. On the other hand, cement is frequently used to treat soils in geotechnical applications, while its production causes a significant environmental impact. Thus, this study provides a disposal alternative by investigating the influence of tire rubber fiber (TRF) as a partial replacement of cement in artificially cemented soils. Unconfined compressive strength (qu) and ultrasonic pulse velocity (UPV) were measured on the various mixtures to assess strength, stiffness, and ductility index. Statistical analysis and regression models were conducted, and a novel approach to estimate rubberized-cemented-clay was proposed to determine G o , q u , and E from a single nondestructive test. Moreover, SEM was performed to observe the interaction of the TRF and cement with the clay on a microscopic scale. The results showed that the 2.5% TRF content improves rubberized cemented clay's strength, stiffness, and ductility index by around 12–15%. Furthermore, up to 10% of the TRF blends achieved the minimum requirements for rammed earth, base, and sub-base treated soils. However, 20% of TRF reduces G o , and q u , by around 20–30% while improving the ductility index by 35–40%. 每年,大量轮胎的使用寿命即将结束,对人类健康和环境构成威胁. 另一方面,水泥在岩土工程应用中经常用于处理土壤,而其生产会对环境产生重大影响. 因此,本研究通过研究轮胎橡胶纤维(TRF)作为人工水泥土中水泥的部分替代品的影响,提供了一种处理方案. 测量了各种混合物的无侧限抗压强度(qu)和超声脉冲速度(UPV),以评估强度、刚度和延性指数. 进行了统计分析和回归模型,并提出了一种新的方法来估计橡胶胶结粘土,以从单个无损检测中确定Go、qu和E. 此外,用扫描电镜在微观尺度上观察了TRF和水泥与粘土的相互作用. 结果表明,2.5%的TRF含量可使橡胶胶结粘土的强度、刚度和延性指数提高约12-15%. 此外,高达10%的TRF混合物达到了夯实土、基底和底基层处理土壤的最低要求. 然而,20%的TRF将Go和qu降低约20–30%,同时将延性指数提高35–40%.

What problem does this paper attempt to address?

The problem this paper attempts to address is: Every year, a large number of tires reach the end of their service life, posing a threat to human health and the environment. On the other hand, cement is commonly used in geotechnical engineering applications to treat soil, but its production process has a significant environmental impact. Therefore, this study aims to provide a method for dealing with waste tires by investigating tire rubber fibers (TRF) as a partial replacement for cement. Specifically, the research objectives include: 1. **Evaluate mechanical performance**: Measure the unconfined compressive strength (qu) and ultrasonic pulse velocity (UPV) under different mixing ratios to assess the strength, stiffness, and ductility index of rubber-modified cement soil. 2. **Microstructure analysis**: Observe the interaction between TRF, cement, and clay at the microscopic scale using a scanning electron microscope (SEM). 3. **Develop new evaluation methods**: Propose a new method to estimate the initial shear modulus (Go), unconfined compressive strength (qu), and elastic modulus (E) of rubber-modified cement soil through a single non-destructive test. 4. **Optimize TRF content**: Determine the optimal amount of TRF to add in order to achieve the dual goals of environmental protection and performance without compromising or minimizing the decline in mechanical performance. Through these studies, the paper hopes to provide a new and effective way to deal with waste tires while reducing the use of cement, thereby mitigating the environmental impact.

Evaluation of Mechanical and Microstructural Properties of Waste Tire Improved Cemented Clay

Enhancing clayey soil performance with lime and waste rubber tyre powder: Mechanical, microstructural, and statistical analysis

Mechanical Behaviour of Completely Decomposed Granite Soil with Tire Rubber Granules and Fibres

Engineering properties and sustainability assessment of recycled fibre reinforced rubberised cementitious composite

Performance analysis and engineering application of waste rubber crumbs in concrete

Deformation Characteristics of Rubber Waste Powder–Clay Mixtures

A Review of the Durability-Related Features of Waste Tyre Rubber as a Partial Substitute for Natural Aggregate in Concrete

Mechanical and microstructural characterization of sustainable concrete containing recycled concrete and waste rubber tire fiber

Carbonation Depth and Chloride Ion Penetration Properties of Rubberised Concrete Incorporated Ground Blast Furnace Slag

Feasibility study on utilisation of clay–waste tyre rubber mix as construction material

Rubber/crete: Mechanical properties of scrap to reuse tire-derived rubber in concrete; A review

Sustainable use of recycled carbon fiber reinforced polymer and crumb rubber in concrete: mechanical properties and ecological evaluation

Investigation of the mechanical and shrinkage properties of plastic-rubber compound modified cement mortar with recycled tire steel fiber

Mechanical Properties of Rubberised Geopolymer Concrete

Dynamic Loading Characteristics of Cemented Paste Backfill with Recycled Rubber

Cyclic and Dynamic Behavior of Sand–Rubber and Clay–Rubber Mixtures

Optimization of recycled rubber self-compacting concrete: Experimental findings and machine learning-based evaluation

Influence of Basalt/Polypropylene Fiber on Permeability and Uniaxial Compressive Properties of Waste Tire Rubberized Concrete

Mechanical and Durability Properties of Rubberized Sulfur Concrete Using Waste Tire Crumb Rubber

Shear Strength Properties Of Waste Tires. Granulated Rubber And Loess Mixtures

Effects of Recycled Rubber Particles Incorporated as Partial Sand Replacement on Fresh and Hardened Properties of Cement-Based Concrete: Mechanical, Microstructural and Life Cycle Analyses