Abstract:High-pressure die casting (HPDC) is a widely used process with short cycle times to manufacture complex shapes of aluminium castings for the automotive industry. Most of the die casting companies use specialized commercial software to simulate molten metal filling and solidification. This approach works satisfactorily and is industrially accepted for defect prediction capability. Die cooling is an effective technique to reduce internal porosity in die cast components. But die cooling process is not completely captured in the approach used in the casting simulations. This often resulted in false positives in the defect predictions. One of the main reasons for the lack of precision in simulation is the uncertainty in assigning the boundary conditions such as heat transfer coefficients (HTC) for the die cooling channel. In this study, a coupled simulation strategy was developed to determine accurate HTC values of the die cooling channel. The computational domain was divided into two sub-domains, i.e. , casting zone and die cooling zone. Two different industrially accepted simulation tools were used: (a) for casting simulation and (b) for turbulent fluid flow and heat transfer simulation in the cooling channel. A series of iterations were performed by exchanging information at the interface between the two sub-domains till the convergence was achieved. Experiments were also conducted with a thermocouple inserted in the die and the actual die temperature readings were measured. The converged simulation results agreed well with the experimental measurements. Also, the influence of flow rate on HTC was studied by conducting experiments with two different flow rates and the castings produced were analyzed with the help of CT scan analysis, micro-structure evaluation and thermal imaging. The obtained results demonstrated the efficacy of the method adopted in prescribing the values of heat transfer conditions in casting simulations. With the coupled simulation approach developed in this work, parametric studies were conducted to maximize the heat removal rate from a given die, for different flow velocities, nozzle diameters, cooling hole diameters and nozzle-to-surface spacings.

Objective Functions for the Shape Optimization of Temperature Control Channels in High‐Pressure Die Casting

Study on Cooling Channel Arrangement of High-Pressure Casting Die for Box-Like Workpieces

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Thermo-Mechanical Optimization of Die Casting Molds Using Topology Optimization and Numerical Simulations

Thermofluid topology optimization for cooling channel design

Study of Flow and Heat Transfer in High Pressure Die Casting Cooling Channel

3-Dimenional conformal cooling channel design: Origami-inspired topology optimization approach

Die temperature monitoring of high pressure die casting

Development of an Experimental Setup to Investigate Influences on Component Distortion in Gravity Die Casting and a First Variation of Temperature Control Strategy

Tailoring flow behavior and heat transfer in tempering channels for high-pressure die casting—analysis of potentials of commercial static mixers and prospects of additive manufacturing

Topology Optimization of Channel Cooling Structures Considering Thermomechanical Behavior

Integrated optimization system for high pressure die casting processes

Methodology of a thermal injection mold design with locally applied heating coatings on the cavity wallMethodik einer thermischen Spritzgießform mit lokal aufgebrachten Heizschichten auf der Kavitätswand

Quality Control Study on High Pressure Casting Based on Magma and Ultra-red Simulation

Finite element analysis for die casting parameters in high-pressure die casting process

A heuristic approach to meet geometric tolerance in High Pressure Die Casting

Heat Transfer Coefficient Determination in a Gravity Die Casting Process with Local Air Gap Formation and Contact Pressure Using Experimental Evaluation and Numerical Simulation

Development of Thermal Boundary Condition Model at Metal/die Interface of High Pressure Die Casting Process

The Influence of Physical Properties of C55 Alloy on Geometry of Flow in the Process of Shaping

Application of a 3D-Printed Part with Conformal Cooling in High-Pressure Die Casting Mould and Evaluation of Stress State During Exploitation

A Holistic Approach to Cooling System Selection and Injection Molding Process Optimization Based on Non-Dominated Sorting