Abstract:Efficient removal of heavy metals complexed with organic ligands from water is still an important but challenging task now. Herein, a novel combined process, i.e., Fe(III)-displacement/UV degradation/alkaline precipitation (abbreviated as Fe(III)/UV/OH) was developed to remove copper organic complexes from synthetic solution and real electroplating effluent, and other processes including alkaline precipitation, Fe(III)/OH, UV/OH were employed for comparison. By using the Fe(III)/UV/OH process, some typical Cu(II) complexes, such as Cu(II) ethylenediaminetetraacetic acid (EDTA), Cu(II) nitrilotriacetic acid (NTA), Cu(II) citrate, Cu(II) tartrate, and Cu(II) sorbate, each at 19.2 mg Cu/L initially, were efficiently removed from synthetic solution with the residual Cu below 1 mg/L. Simultaneously, 30-48% of total organic carbon was eliminated with exception of Cu(II) sorbate. Comparatively, the efficiency of other processes was much lower than the Fe(III)/UV/OH process. With Cu(II) citrate as the model complex, the optimal conditions for the combined process were obtained as: initial pH for Fe(III) displacement, 1.8-5.4; molar ratio of [Fe]/[Cu], 4:1; UV irradiation, 10 min; precipitation pH, 6.6 -13. The mechanism responsible for the process involved the liberation of Cu(II) ions from organic complexes as a result of Fe(III) displacement, decarboxylation of Fe(III)-ligand complexes subjected to UV irradiation, and final coprecipitation of Cu(II) and Fe(II)/Fe(III) ions. Up to 338.1 mg/L of Cu(II) in the electroplating effluent could be efficiently removed by the process with the residual Cu(II) below 1 mg/L and the removal efficiency of similar to 99.8%, whereas direct precipitation by using NaOH could only result in total Cu(II) removal of similar to 8.6%. In addition, sunlight could take the place of UV to achieve similar removal efficiency with longer irradiation time (90 min). (C) 2015 Elsevier Ltd. All rights reserved.

Selective solvent extraction of Cu(II) from aqueous solutions using an acyl-based thiourea: Extraction study and DFT analysis of reaction mechanism

Investigating the extraction performance and mechanism of a multifunctional thiourea molecule for the effective removal of Ag(i) from aqueous solutions

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Substituent Effects of Phenanthroline-Derived Phosphine-Oxide Extractants on Extraction and Separation Performance Towards U(VI)/Th(IV)

Improving Selective Separation of Cu(II) from Acidic Polymetallic Media with 2-Ethylhexyl 4-Pyridinecarboxylate Ester: Extraction Behaviors, Coordination Structure and Microscopic Mechanism

Application of the Taguchi Method and Central Composite Design for the Highly Selective and Efficient Extraction of Cu(II) ions from an Aqueous Solution Containing Mn(II), Co(II), Ni(II), Zn(II), Cu(II), and Pb(II) ions Mixture Using Benzyl Bis(thiosemicarbazone)

Efficient removal of Cu(II) from an aqueous solution using a novel chitosan assisted EDTA-intercalated hydrotalcite-like compound composite: Preparation, characterization, and adsorption mechanism

Selective Extraction of Cu (II) Using Novel C=O–NOH-Contained Compound-Dodecyl Phenyl Ethyl Hydroxamic Acid and Its Extraction Mechanism

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

Heteroatom decorated polythiourethane sorbent for copper (II) extraction in wastewater treatment

Deep purification of copper from Cu(II)-EDTA acidic wastewater by Fe(III) replacement/diethyldithiocarbamate precipitation

A New Combined Process for Efficient Removal of Cu(II) Organic Complexes from Wastewater: Fe(III) Displacement/uv Degradation/alkaline Precipitation

A Theoretical Investigation on the Selective Extraction of Cu(II) from Ni(II) by 2-Aminomethylpyridine Derivatives: A DFT Study

Sequestration of Chelated Copper by Structural Fe(II): Reductive Decomplexation and Transformation of Cu(II)-EDTA.

Study on Cu(II) extraction process optimization and mechanism from acidic leaching solution using the deep eutectic solvent P507/Menthol

Simultaneous extraction of Cr(VI) and Cu(II) from humic acid with new synthesized EDTA derivatives

Synergistic Separation of Copper(ii) in Sulfate Solutions Through Outer-Sphere Coordination of Dinonylnaphthalene Disulfonic Acid

Extraction Behavior and Mechanism of Cu(II) in Ammoniacal Sulfate Solution with Β-Diketone

Recycling Cu(II) from complexing copper wastewater using ferrous sulfide stabilized by carboxymethyl cellulose: efficiency and mechanism insights

Preparation of a Novel Resin with Acyl and Thiourea Groups and Its Properties for Cu(II) Removal from Aqueous Solution.

Selective Recovery of Copper from a Synthetic Metalliferous Waste Stream Using the Thiourea-Functionalized Ion Exchange Resin Puromet MTS9140