Abstract:In recent years, P2-layered manganese-based cathodes have garnered considerable attention because of their exceptional capacity, high energy density, and facile synthesis. Nevertheless, the poor rate capability and inferior capacity retention at high discharge rates have limited their application in commercial batteries. In this work, we report a stable P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 layered oxide cathode material with both alkali metal site doping and transition metal site doping and confirm that the synergistic effect of the K–Mg–Zn system suppresses the phase transition of P2–O2 and reduces the activation energy of interfacial charge transfer. Furthermore, the introduction of the K–Mg–Zn system results in favorable cycling stability rate performance of the sample. Specifically, the initial discharge capacity at 0.1C is measured to 140.9 mAh g–1, with a capacity retention of 95.1% after 100 cycles at 1C. Remarkably, even after 2000 cycles at 20C, the capacity retention remains at 82.8%. Ex situ X-ray photoelectron spectroscopy (XPS) analysis and the density functional theory (DFT) calculation reveal that the charge compensation during the KNMMZ charging and discharging process can be interpreted as the cooperative action of Mn3+/Mn4+ and Ni2+/Ni3+/Ni4+ redox couples in the voltage range of 2–4 V, while peaks around 4.2 V are attributed to the anionic redox action. Ex situ X-ray diffraction (XRD) analysis reveals the pronounced capability of KNMMZ to effectively suppress the P2–O2 phase transition. The complex impedance measurements and the galvanostatic intermittent titration technique validate that the K–Mg–Zn system enhances the diffusion of sodium ions. Furthermore, the full cell demonstrates outstanding cyclic electrochemical performance, underscoring its exceptional stability and durability throughout multiple charge–discharge cycles. Consequently, the P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 system presents promising prospects for the advancement of high-energy SIBs in practical applications.

Tuning Sodium Occupancy Sites in P2‐Layered Cathode Material for Enhancing Electrochemical Performance

Promoting the Performances of P2-type Sodium Layered Cathode by Inducing Na Site Rearrangement

Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries.

Transition‐Metal Vacancy Manufacturing and Sodium‐Site Doping Enable a High‐Performance Layered Oxide Cathode through Cationic and Anionic Redox Chemistry

Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery

Entropy Tuning Stabilizing P2‐Type Layered Cathodes for Sodium‐Ion Batteries

Theoretical and Experimental Optimization of P2‐Type Sodium‐Ion Battery Cathodes via Li, Mg, and Ni Co‐Doping: A Path to Enhanced Capacity and Stability

Orthorhombic Na2/3Cu0.1Mn0.9O2 cathode: Enhanced Na storage performances with the suppressed Mn–O bond anisotropy

Tuning Anionic/cationic Redox Chemistry in a P2-type Na0.67Mn0.5Fe0.5O2 Cathode Material Via a Synergic Strategy

A Comprehensive Modification Enables the High Rate Capability of P2-Na0.75Mn0.67Ni0.33O2 for Sodium-Ion Cathode Materials

Manipulating Stable Layered P2‐Type Cathode via a Co‐Substitution Strategy for High Performance Sodium Ion Batteries

Tailoring P2/P3 Biphases of Layered Na x MnO 2 by Co Substitution for High‐Performance Sodium‐Ion Battery

Simultaneously Enhancing Structural Stability and Cationic Redox in Na<sub>0.67</sub>Mn<sub>0.75</sub>Fe<sub>0.25</sub>O<sub>2</sub> through a Synergy of Multisite Substitution

Precisely Modulating the Structural Stability and Redox Potential of Sodium Layered Cathodes Through the Synergetic Effect of Co-Doping Strategy

Insights of the Electrochemical Reversibility of P2-Type Sodium Manganese Oxide Cathodes Via Modulation of Transition Metal Vacancies

Exploring the Charge Compensation Mechanism of P2-Type Na0.6Mg0.3Mn0.7O2 Cathode Materials for Advanced Sodium-Ion Batteries

Electrochemical Mechanism Analysis of Dual-Site Doped on P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 Enabling Anionic and Cationic Redox with Excellent Electrochemical Performance

P3-type layered Na0.26Co1−xMnxO2 cathode induced by Mn doping for high-performance sodium-ion batteries

Ultralow‐Strain Zn‐Substituted Layered Oxide Cathode with Suppressed P2–O2 Transition for Stable Sodium Ion Storage

Reversible Mn2+/Mn4+ Double-Electron Redox in P3-type Layer-Structured Sodium-Ion Cathode

Structural Regulation of P2‐Type Layered Oxide with Anion/Cation Codoping Strategy for Sodium‐Ion Batteries