Abstract:Ceramic membranes offer significant potential for addressing challenging and harsh wastewater streams such as produced water (PW) and surfactant-stabilized oil/water (O/W) emulsions. This study focuses on developing a stable and a uniformly structured active layer solely composed of MIL-125-NH 2 MOF on a ceramic Alumina support. A stable covalent bonding approach was employed using interfacial polymerization, with isophthaloyl chloride (IPC) acting as the organic crosslinker during interfacial polymerization reaction. Three distinct MIL-125-NH 2 decorated membranes M50, M75, and M100 were prepared by using varying MOF concentrations. Surface wettability analysis of the membranes indicated that the MIL-125-NH 2 MOF active layer displayed super-hydrophilic characteristics in the air (water contact angle = 0°) and super-oleophobic characteristics underwater (oil contact angle = 161.5°). In oil separation experiments, all the MIL-125-NH 2 deposited membranes displayed >99% oil rejection. Among the fabricated membranes, M50 demonstrated the highest water flux of 2100 Lm −2 h −1 under a transmembrane pressure of 2 bar. The MIL-125-NH 2 MOF deposited membranes also showed stable performance under longer-run filtration. This study would be a simple and effective method of decorating MOFs as an active layer on ceramic support for efficient O/W emulsion separation and desalination applications.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the difficult problem of oil - water separation in oily wastewater treatment. Specifically, the researchers have developed an alumina nanocomposite membrane based on MIL - 125 - NH₂ metal - organic framework (MOF), aiming to improve the separation efficiency and stability for oil - water emulsions (especially those stabilized by surfactants). This membrane material has the characteristics of super - hydrophilicity and underwater super - oleophobicity, which can effectively prevent the adsorption of oil droplets on the membrane surface, thereby reducing membrane pollution and improving the separation effect and water flux. ### Research Background - **Severity of the Problem**: Oily wastewater discharged from industries such as petroleum, pharmaceuticals, metal processing, and food has caused serious pollution to natural water bodies (such as lakes, rivers, and oceans). These pollutants are not only harmful to the environment but may also affect human health. - **Limitations of Existing Technologies**: Traditional wastewater treatment methods have limited effectiveness in treating large - scale industrial oily wastewater, while membrane technology has become an effective means of treating oily wastewater due to its high efficiency and sustainability. However, existing ceramic membranes are prone to pollution when treating oil - water emulsions, resulting in a decrease in separation efficiency and an increase in energy consumption. ### Research Objectives - **Develop New Membrane Materials**: Deposit MIL - 125 - NH₂ MOF on the ceramic alumina support layer to form a stable and uniform active layer, so as to improve the anti - pollution performance and separation efficiency of the membrane. - **Optimize the Membrane Preparation Process**: Use the interfacial polymerization reaction (Interfacial Polymerization, IP) technology, with isophthaloyl chloride (IPC) as an organic cross - linker, to achieve stable covalent bonding between MIL - 125 - NH₂ and the ceramic support layer. - **Evaluate the Membrane Performance**: Test the performance of membranes decorated with different concentrations of MIL - 125 - NH₂ in oil - water separation through experiments, including water flux, oil rejection rate, and long - term operation stability. ### Main Findings - **Surface Characteristics**: The MIL - 125 - NH₂ MOF - modified membrane exhibits super - hydrophilicity in air (water contact angle = 0°) and super - oleophobicity underwater (oil contact angle = 161.5°). - **Separation Performance**: All MIL - 125 - NH₂ - modified membranes show an oil rejection rate of > 99% in the oil separation experiment. Among them, the M50 membrane exhibits the highest water flux (2100 Lm⁻²h⁻¹) under a transmembrane pressure of 2 bar. - **Long - Term Stability**: The MIL - 125 - NH₂ - modified membrane shows stable performance during long - term filtration. ### Conclusion This study has successfully developed a ceramic alumina nanocomposite membrane based on MIL - 125 - NH₂ MOF, which exhibits excellent separation performance and anti - pollution ability in treating oily wastewater. This technology is expected to achieve efficient oil - water separation and desalination in large - scale industrial applications.

Tailored alumina nanocomposite membranes featuring MIL-125-NH 2 metal-organic frameworks for oily wastewater treatment

Preparation and Modification of Ceramic Membrane and Its Application in Oil/Water Wastewater Treatment

A Simple Approach to Fabricate Composite Ceramic Membranes Decorated with Functionalized Carbide-Derived Carbon for Oily Wastewater Treatment

Ceramic Membranes with Mussel-Inspired and Nanostructured Coatings for Water-in-oil Emulsions Separation

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Ag-CuO-Decorated Ceramic Membranes for Effective Treatment of Oily Wastewater

Elaboration and characterization of novel two-layer tubular ceramic membranes by coating natural zeolite and activated carbon on mullite-alumina-zeolite support: application for oily wastewater treatment

Oil-in-water emulsion separation: Fouling of alumina membranes with and without a silicon carbide deposition in constant flux filtration mode

Deployment of Superhydrophilic and Super-antifouling Cr-soc-MOF-1-Based Membrane for Ultrafast Separation of Stabilized Oil-in-Water Emulsions.

Fabrication of Novel Zwitterionic Copolymer High Performance Membrane Applied for Oil/water Mixtures and Emulsions Separation

Silica-decorated polypropylene microfiltration membranes with a mussel-inspired intermediate layer for oil-in-water emulsion separation.

High permeability PEG/MXene@MOF membrane with stable interlayer spacing and efficient fouling resistance for continuous oily wastewater purification

An Evolving MOF Thin-Film Nanocomposite Tubular Ceramic Membrane for Desalination Pretreatment

MIL-88A-based Antifouling Superhydrophilic Membrane for Efficient Emulsion Separation and Dye Degradation via Photo-Fenton Process

Fabrication of Cost-Effective and Antifouling Al2O3-SiO2 Membrane for Efficient Oil Emulsion Separation

Antifouling macrocyclic-engineered PVDF membrane for the low-pressure separation of surfactant-stabilized oily wastewater

2D Nano-Mica Sheets Assembled Membranes for High-Efficiency Oil/Water Separation

Superhydrophilicity and Underwater Superoleophobicity TiO2/Al2O3 Composite Membrane with Ultra Low Oil Adhesion for Highly Efficient Oil-in-water Emulsions Separation

State-of-the-Art Ceramic Membranes for Oily Wastewater Treatment: Modification and Application

Synthesis of aminopropyl triethoxysilane/melamine incorporated superhydrophilic membranes for simultaneous removal of oil, metals, and Salt ions from produced water

Porous Al2O3 ceramics with directional gradient pore structure modified by cobweb-bridged WO3 nanowires for oil/water emulsions separation