Abstract:The separation of oil in water and water in oil emulsions using the ceramic membranes with selective oil and water wettability has proven to be cost effective, less cumbersome and more efficient, compared to the conventional methods. In this work, a silicon carbide having hexagonal crystal structure (H-SiC) based ceramic membrane, exhibiting in-air superhydrophilicity and underwater superoleophobicity was fabricated for water passing oil-water emulsion separation. Initially silicon dioxide (SiO 2 ) was grown on the surface of H-SiC by thermal process to enhance the hydrophilicity, and further enhancement of hydrophilicity was introduced by amino-functionalizing H-SiC/SiO 2 using N 1 -(3-trimethoxysilylpropyl)diethylenetriamine (N-TMS-DETA). The amino-functionalized H-SiC/SiO 2 particles were deposited on porous alumina support surface and crosslinked via interfacial polymerization (IP) using Isophthaloyl chloride (IPC) cross-linker and ethylenediamine (EDA) to fabricate functional PA/H-SiC/SiO 2 @Alumina ceramic membrane for oil/water emuslion separation. The morphological, structural, elemental characterizations using FT-IR, XRD, FE-SEM, EDS, elemental mapping, and the wettability of PA/H-SiC/SiO 2 @Alumina ceramic membarne were carried out. The characterization results revealed the perfect deposition of functionalized H-SiC/SiO 2 on alumina support surface, and the contact angles of PA/H-SiC/SiO 2 @Alumina ceramic membrane surface in air-surface-water (θ WA ), and oil-surface-water (θ OW ) interfaces were 0° and ∼159.7° respectively. When PA/H-SiC/SiO 2 @Alumina ceramic membrane was used for the oil-water emulsion separation using dead-end filtration cell, an impressive separation efficiency of > 99% with a flux of around 312 L∙m −2 ∙h −1 was observed. The system was tested for the separation efficiency at different transmembrane pressures, oil concentration of oil-water emulsion, and the long term stabilty of the PA/H-SiC/SiO 2 @Alumina ceramic membrane.

Fabrication of Cost-Effective and Antifouling Al2O3-SiO2 Membrane for Efficient Oil Emulsion Separation

Preparation and Modification of Ceramic Membrane and Its Application in Oil/Water Wastewater Treatment

Facile fabrication of silicon carbide decorated ceramic membrane, engineered with selective surface wettability for highly efficient separation of oil-in-water emulsions

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Ceramic Membranes with Mussel-Inspired and Nanostructured Coatings for Water-in-oil Emulsions Separation

A TiO 2 modified whisker mullite hollow fiber ceramic membrane for high-efficiency oil/water emulsions separation

Superhydrophilicity and Underwater Superoleophobicity TiO2/Al2O3 Composite Membrane with Ultra Low Oil Adhesion for Highly Efficient Oil-in-water Emulsions Separation

Photopolymerization enabled in-air highly oleophobic and hydrophilic SiC membranes with improved antifouling performance in oil-in-water emulsion separation

One-step fabrication of asymmetric alumina ceramic membranes with tunable pore parameters for oil-water separation

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

Oil-in-water emulsion separation: Fouling of alumina membranes with and without a silicon carbide deposition in constant flux filtration mode

High-flux whisker layer ceramic membrane prepared by gel spin-coating method for low-pressure oil/water emulsion filtration

Enhanced photogenic self-cleaning of superhydrophilic Al2O3@GO-TiO2 ceramic membranes for efficient separation of oil-in-water emulsions

One Step Co-Sintering Synthesis of Gradient Ceramic Microfiltration Membrane with Mullite/alumina Whisker Bi-Layer for High Permeability Oil-in-water Emulsion Treatment

Preparation of super hydrophilic-underwater super oleophobic photoinduced self-cleaning Al 2 O 3 @TiO 2 ceramic membrane and separation performance of oil-in-water emulsion

A study on the efficient separation of oily water using mullite whiskers membrane through combined filtration and electrofiltration

A Simple Approach to Fabricate Composite Ceramic Membranes Decorated with Functionalized Carbide-Derived Carbon for Oily Wastewater Treatment

Enhancing anti-fouling performance of ceramic membranes through iron oxide modification for the separation of oil-containing fermentation broth

Fabrication of Novel Zwitterionic Copolymer High Performance Membrane Applied for Oil/water Mixtures and Emulsions Separation

Lower-temperature preparation of SiC ceramic membrane using zeolite residue as sintering aid for oil-in-water separation

Ag-CuO-Decorated Ceramic Membranes for Effective Treatment of Oily Wastewater