Abstract:Hydrogen has been largely proposed as a possible fuel for internal combustion engines. The main advantage of burning hydrogen is the absence of carbon-based tailpipe emissions. Hydrogen's wide flammability also offers the advantage of very lean combustion and higher engine efficiency than conventional carbon-based fuels. In order to avoid abnormal combustion modes like pre-ignition and backfiring, as well as air displacement from hydrogen's large injected volume per cycle, direct injection of hydrogen after intake valve closure is the preferred mixture preparation method for hydrogen engines. The current work focused on computational studies of hydrogen injection and mixture formation for direct-injection spark-ignition engines. Hydrogen conditions at the injector's nozzle exit are typically sonic. Initially the characteristics of under-expanded sonic hydrogen jets were investigated in a quiescent environment using both Reynolds-Averaged Navier-Stokes (RANS) and Large-Eddy Simulation (LES) techniques. Various injection conditions were studied, including a reference case from the literature. Different nozzle geometries were investigated, including a straight nozzle with fixed cross section and a stepped nozzle design. LES captured details of the expansion shocks better than RANS and demonstrated several aspects of hydrogen's injection and mixing. In-cylinder simulations were also performed with a side 6-hole injector using 70 and 100 bar injection pressure. Injection timing was set to just after inlet valve closure with duration of 6 μs and 8 μs, leading to global air-to-fuel equivalence ratios ϕ typically in the region of 0.2-0.4. The engine intake air pressure was set to 1.5 bar absolute to mimic boosted operation. It was observed that hydrogen jet wall impingement was always prominent. Comparison with non-fuelled engine conditions demonstrated the degree of momentum exchange between in-cylinder hydrogen injection and air motion. LES highlighted details of hydrogen's spatial distribution throughout the injection duration and up to ignition timing. Higher peak velocities were predicted by LES, especially on the tumble plane. With the employed injection strategy, the areas closer to the cylinder wall were richer in fuel than the centre of the chamber close to the end of compression.

Research on Working Characteristics of Coupled Dynamics Linear Hydrogen Internal Combustion Engine Based on Electromechanical Integration

Experimental and simulation research on the lean combustion characteristics of direct-injection hydrogen engine

Simulation and Analysis of Hydrogen-fueled Engine Combustion

Effect of Different Combustion Modes on the Performance of Hydrogen Internal Combustion Engines under Low Load

A Modelling Study into the Effects of Variable Valve Timing on the Gas Exchange Process and Performance of a 4-Valve DI Homogeneous Charge Compression Ignition (HCCI) Engine

Combined experimental-numerical analysis of hydrogen as a combustion enhancer applied to wankel engine

Optical study on the effects of the hydrogen injection timing on lean combustion characteristics using a natural gas/hydrogen dual-fuel injected spark-ignition engine

Transient Modeling and Performance Analysis of Hydrogen-Fueled Aero Engines

Experimental study on the combustion and emission performance of the hydrogen direct injection engine

Study on Combustion Behaviors and Cycle-by-cycle Variations in a Turbocharged Lean Burn Natural Gas S.I. Engine with Hydrogen Enrichment

Numerical investigation on gaseous fuel injection strategies on combustion characteristics and NO emission performance in a pure hydrogen engine

Effect of hydrogen direct injection on natural gas/hydrogen engine performance under high compression-ratio conditions

Virtual Development of a Single-Cylinder Hydrogen Opposed Piston Engine

Characterising Premixed Ammonia and Hydrogen Combustion for a Novel Linear Joule Engine Generator

Experimental Study on the Effects of Hydrogen Injection Strategy on the Combustion and Emissions of a Hydrogen/Gasoline Dual Fuel SI Engine under Lean Burn Condition

Motion control of a hydrogen-fueled free-piston engine generator considering cyclic combustion variations

Parametric analysis of hydrogen two-stage direct-injection on combustion characteristics, knock propensity, and emissions formation in a rotary engine

Computational Study of Hydrogen Direct Injection for Internal Combustion Engines

Study on the effect of variable valve timing and spark timing on the performance of the hydrogen-fueled engine with passive pre-chamber ignition under partial load conditions

Effects of Hydrogen Addition on Cycle-By-Cycle Variations in A Lean Burn Natural Gas Spark-Ignition Engine

An Experimental Study on Combustion and Cycle-by-Cycle Variations of an N-Butanol Engine with Hydrogen Direct Injection under Lean Burn Conditions