Abstract:With the depletion of river sand and the rising price of quartz sand, more and more researchers are trying to use manufactured sand to prepare ultra-high performance concrete (UHPC). However, due to the large amount of fine particles and high water demand, few studies are available to directly use the manufactured sand in its original state to prepare UHPC. To overcome the above problems, in this study, two locally available recycled manufactured sands are used as aggregates, and an attempt is made to maximize the use of their original gradation to prepare a cleaner construction production integrating high flowability, excellent mechanical per-formance, high cost-effective and environmentally-friendly property that meets the engineering requirements. The properties of workability, mechanical strengths, volume stability, hydration degree, pore structures, morphology of interfacial transition zone (ITZ), carbon emission and production cost are evaluated and dis-cussed. Results indicate that all the mixtures prepared in this study can be considered to have high flowability except when granite sand is completely used. The mixture containing 75% tuff sand can even reach a compressive strength of 166.2 MPa, which is 10.5% higher than the reference one. A reduction of 28.9% can be observed in the early-age autogenous shrinkage of tuff sand UHPC as compared to the reference specimen. The mercury intrusion porosimetry (MIP) and X-ray computed tomography (X-CT) results demonstrate that the micropore volume, porosity and number of mesopores of UHPC increase to a certain extent when manufactured sand is utilized. The scanning electron microscope (SEM) observation reveals the most compact ITZ between cement paste and waste tuff sand. Additionally, the recycled manufactured sand UHPC can diminish the carbon emission of 19 kg and the cost of 27.4% (granite sand) and 25.5% (tuff sand) per cubic meter, showing excellent environmental and economical benefits.

Self-compacting microconcretes containing ornamental stone waste and expanded polystyrene residue: influence of the ratios filler/cement and lightweight /conventional aggregates

Compressive Behavior of Lightweight Concrete Using Aerogel-Reinforced Expanded Polystyrene Foams

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

Sustainable Structural Lightweight Concrete with Recycled Polyethylene Terephthalate Waste Aggregate

Physical and Chemical Properties of Waste Foundry Exhaust Sand for Use in Self-Compacting Concrete

Effect of Ornamental Stone Waste Incorporation on the Rheology, Hydration, Microstructure, and CO2 Emissions of Ordinary Portland Cement

Effect of Sandy Soil Partial Replacement by Construction Waste on Mechanical Behavior and Microstructure of Cemented Mixtures

Eco-friendly concrete: Combining treated wastewater and recycled aggregates

The Possibility of Producing Self-Compacting Lightweight Concrete by Using Expanded Polystyrene Beads as Coarse Aggregate

Effects on the Properties of Self-Compacting Cement Paste (PAA) with the Addition of Superabsorbent Polymer

Experimental Investigation on Mechanical and Thermal Properties of Concrete Using Waste Materials as an Aggregate Substitution

Sustainable Hybrid Lightweight Aggregate Concrete Using Recycled Expanded Polystyrene

Lightweight Concrete Incorporating Waste Expanded Polystyrene

Experimental and Statistical Evaluation of the Interaction Effect of Recycled Aggregate and Water/Cement Ratio on Concrete Compressive Strength

An investigation on the physical properties of cementitious pastes modified with low dosage of waste glass powder and silica fume

The Impact of a Large amount of Ultra-fine Sunflower Ash With/without Polypropylene Fiber on the Characteristics of Sustainable Self-compacting Concrete

Effectiveness Assessment of Superplasticizer Admixtures: Case of Self-compacting Concrete Reinforced with Fine Mineral Fillers

Assessment of fluidity retention, mechanical strength and cost production of blended cement self-compacting concrete using the concept of a performance index

Influence of replacing Portland cement with three different concrete sludge wastes

Recycled Expanded Polystyrene as Lightweight Aggregate for Environmentally Sustainable Cement Conglomerates