Abstract:Single-stage hydrotreating (HDT) of loblolly pine biocrude produced from catalytic pyrolysis was conducted to gain insight to HDT performance in terms of product yields, liquid product quality, and hydrogen consumption. Tests were performed with a sulfided HDT catalyst at three different conditions. The longest continuous time onstream operation (365 h) was achieved at an average bed temperature of 290 degrees C, 138 bar pressure, H2/oil ratio of 3300 Nl l(-1), and a liquid hourly space velocity (LHSV) of 0.25 h(-1). The average carbon yield of the HDT liquids were 77%, 83%, and 89% for experiments 1, 2, and 3, respectively. Also, the biocrude carbon that ended up in the gas phase varied between 4.3% and 8.9%. The carbon in the aqueous phase fraction was negligible-less than 0.5% of the biocrude carbon. The average hydrogen consumed ranged from 0.04 g to 0.07 g per 1 g of dry biocrude. The highest carbon content measured for the HDT liquid products from all three experiments was 87.13 wt% and the lowest was 79.03 wt%. GC-MS analysis suggests that the HDT product with oxygen content less than 5 wt% contained mainly naphthenic hydrocarbons. On the other hand, HDT products with oxygen content greater than 5 wt% contained a higher concentration of simple phenols and aromatic hydrocarbons (mono-and poly-). Catalyst deactivation was evident in the quality of the HDT liquid collected over time; the density and viscosity increased, the H/C ratio and carbon contents decreased; also, the gasoline fraction decreased while the gas oil fraction increased. The results from this work suggest that HDT of biocrude produced by catalytic biomass pyrolysis can be successfully upgraded into hydrocarbon liquid fuels without a stabilization step.

Catalytic hydrotreatment of the high-boiling-point fraction of soybean straw biocrude in a mixed hydrogen donor

Co-hydrotreating of Used Engine Oil and the Low-Boiling Fraction of Bio-Oil Blends for the Production of Liquid Fuel

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Role of Solvent in Catalytic Conversion of Oleic Acid to Aviation Biofuels

Integration of catalytic fast pyrolysis and hydroprocessing: a pathway to refinery intermediates and “drop-in” fuels from biomass

Catalytic hydrotreating of crude bio-oil from straw and its distillates obtained by molecular distillation: a comparative study

Hydrotreating of C18 fatty acids to hydrocarbons on sulphided NiW/SiO2-Al2O3

In-depth Study of Synergism Between Torrefaction and Catalyst for Balanced Production of Bio-Oil from Rice Husk Pyrolysis Based on Hydrocarbons Production, Energy Yield and Deoxygenation Degree

Effect of La-Fe/Si-MCM-41 Catalysts and CaO Additive on Catalytic Cracking of Soybean Oil for Biofuel with Low Aromatics

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

A preliminary study on the co-hydrogenation process of coal tar and bio-oil

Catalytic hydropyrolysis of crop straws with different biochemical composition

Solvent processing for improved separation of hydrothermal liquefaction products

Gentle hydrotreatment of shale oil in fixed bed over Ni-Mo/Al2O3 for upgrading

Mild Hydrotreatment of Low Temperature Coal Tar Distillate: Product Composition

Catalytic Hydrotreatment of Humins to Bio-Oil in Methanol over Supported Metal Catalysts

Hydro-upgrading of algal bio-oil in tetralin for the production of high-quality liquid fuel: Process intensification

Microwave-assisted catalytic upgrading of co-pyrolysis vapor using HZSM-5 and MCM-41 for bio-oil production: Co-feeding of soapstock and straw in a downdraft reactor

Catalytic Transfer Hydrogenation with Methanol over Pt/C Catalyst for Synergistic Hydrothermal Hydrogenation of Palmitic Acid

Catalytic deoxygenation of carboxyl compounds in the hydrothermal liquefaction crude bio-oil via in-situ hydrogen supply by CuO-CeO2/ γ -Al2O3 catalyst

Hydrocracking diversity in n-dodecane isomerization on Pt/ZSM-22 and Pt/ZSM-23 catalysts and their catalytic performance for hydrodewaxing of lube base oil