Abstract:Fiber sizing is one of the most important components in manufacturing composites by affecting mechanical properties, including strength and stiffness. The sizing of manmade fibers offers many advantages, such as improving fiber/matrix adhesion and bonding properties, protecting fiber surfaces from damage during the processing and weaving stages, and enhancing the surface wettability of polymer matrices. In this work, the influence of fiber sizing levels on carbon fibers' (CFs) mechanical properties is reported at room temperature using single fiber tensile testing (Favimat+), single fiber pullout testing (SFPO), and interfacial elemental analysis by X-ray photoelectron spectroscopy (XPS). Standard modulus CFs (7 ± 0.2 μm in diameter) were sized using two commercially available Michelman sizing formulations. The average solid content for each sizing formulation was 26.3 ± 0.2% and 34.1 ± 0.2%, respectively. HEXION RIMR 135 with curing agent RIMH 137 was used as a model thermoset epoxy matrix during SFPO measurements. A predictive engineering fiber sizing methodology was also developed. Sizing amounts of 0.5, 1, and 2 wt.% on the fiber surface were achieved for both sizing formulations. For each fiber size level, 50 single-fiber tensile testing experiments and 20 single-fiber pull-out tests were conducted. The ultimate tensile strength (σult) of the carbon fibers and the interfacial shear strength (τapp) of the single fiber composite were analyzed. The sizing levels' effect on interfacial shear stress and the O/C (Oxygen/Carbon) surface composition ratio was investigated. Based on our experimental findings, an increase of 6% in fiber performance was recorded for ultimate tensile and interfacial shear strengths. As a result, generalized fiber sizing and characterization methods were established. These developed methods can be used to characterize the strength and interfacial shear strength of manmade fibers with different sizing formulations and solid contents irrespective of the matrix, i.e., thermoset or thermoplastic.

Nanomaterial-Enhanced Sizings: Design and Optimisation of a Pilot-Scale Fibre Sizing Line

Interface Enhancement of Carbon Fiber Reinforced Unsaturated Polyester Composites with Sizing Agent Containing Carbon Nanotubes

Preparation and Application of Nano-SiO_2 Modified Sizing for Basalt Fiber

Preparation of carboxymethyl cellulose nanofibers and their application in warp size of textile

Effect of hybrid sizings on the surface morphology, mechanical behavior of basalt fibers, and fiber/epoxy composite properties

Effect of Fiber Sizing Levels on the Mechanical Properties of Carbon Fiber-Reinforced Thermoset Composites

Revisiting the sequential evolution of sizing agents in CFRP manufacturing to guide cross-scale synergistic optimization of interphase gradient and infiltration

High Efficient and Continuous Surface Modification of Carbon Fibers with Improved Tensile Strength and Interfacial Adhesion

Effect of Emulsifier Content of Sizing Agent on the Surface of Carbon Fibres and Interface of Its Composites

Effects of Different Sizing Agents on the Interfacial Properties of Carbon Fibers

Effect of the Concentration of the Sizing Agent on the Carbon Fibers Surface and Interface Properties of Its Composites

Investigation of sizing materials for carbon fiber reinforced thermoplastic composites

Self-assembled nano-polymers modified water-based sizing agent for enhancing the dual interfacial properties of carbon fibre/epoxy resin composites

Effect of Nanoscale Surface Modification on the Interfacial Mechanics of Carbon Fibers

Construction of 3D nanostructures on carbon fiber surfaces by sizing for preparing high‐performance composites

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Mechanical Properties of Carbon Fiber Composites Modified with Nano-Sio2 in the Interphase

Mechanism of the impact of the sizing agent chain length on the interfacial mechanical properties of carbon/epoxy composites

Scalable, roll-to-roll manufacturing of multiscale nanoparticle/fiber composites using electrophoretic deposition: Novel multifunctional in situ sensing applications

Preparation of Carbon Nanotube/carbon Fiber Hybrid Fiber by Combining Electrophoretic Deposition and Sizing Process for Enhancing Interfacial Strength in Carbon Fiber Composites

Effects of multi-walled carbon nanotube/graphene oxide-based sizing on interfacial and tribological properties of continuous carbon fiber/poly(ether ether ketone) composites