Abstract:The rare earth elements (REE) are essential for a wide range of applications, from strategic assets (e.g. petroleum cracking, magnets for wind turbines) to popular merchandise, as smartphones. Since 2010, when China, the worlds close to exclusive REE supplier, imposed export quotas, several old and new deposits have been evaluated to compensate market shortage, taking advantage of significant price rises. The Araxá rare earth elements prospect boast a large reserve (6.34Mt @ 5.01% REO), as well as phosphate and niobium, in a deeply weathered ore of carbonatitic origin. The mineralogy and the ore properties are unconventional for rare earth elements, and require a detailed mineralogical and technological characterisation as starting point to develop a feasible processing route.Rare earths are predominantly carried by monazite (over 70%), and by a solid solution of the plumbogummite group minerals where the barium-rich term gorceixite predominates, while cerianite and bastnaesite account for less than 1% each. Minerals of the pyrochlore supergroup are the main Nb carriers, but phosphate is also due to monazite and the plumbogummite group minerals, as apatite has barely been detected. Goethite, high-Al hematite and quartz are the main gangue minerals, and goethite is thoroughly intergrown with the other phases. Fine particle size (P50 close to 45μm) and 47.4% of the REE in the −20μm size fraction is another feature typical of this kind of ore. The mineralogical and textural complexity of the ore required a comprehensive technological characterisation in order to evaluate processing options.Based on textural measurements, the concentration of monazite, the concentration of the REE carrying minerals and the reverse removal of quartz, as processing option for this ore, have been simulated.Incomplete liberation of monazite does limit its grade in an ideal concentrate to 80%, and its recovery to 70%. The low monazite recovery must be added to the loss of REE carried by other phases, reducing the overall REE recovery to below 45%. Monazite has also a very limited exposition of the mineral on the particle's surfaces, supposed to impair process efficiency enough to keep experimental results significantly far from the simulated ones.The concentration of the REE-bearing minerals might be efficient from the liberation point of view, and over 90% of the REE carriers can be recovered to a 97% grade concentrate. Due to the low REE grade of predominant gorceixite (3.3%), however, the concentrate's grade of 14% REE is just slightly above the double of the ore's grade. For the REE-bearing minerals taken together, the process efficiency might be hampered by selectivity due to the complex mineralogy.The major gangue minerals, goethite and hematite, are strongly intergrown with the other minerals of the assemblage, to an extent that evaluating reverse processing considering these phases was not feasible. The removal of quartz by reverse processing is quite straightforward, and 95% of the mineral might be removed to a high-grade quartz concentrate of 93%, with loss of REE of only 0.14%. The mass discharge of 8.7%, however, rises the grade of the concentrate only to 7.3% REE.Complex mineralogy and the fine crystals and particles with strong intergrowth that characterise the ore hamper efficient concentration for the Araxá REE ore, and direct hydrometallurgical processing of the whole was adopted. The results are in agreement with the few other published attempts to concentrate the rare earth minerals from residual lateritic ores related to carbonatites.

Investigation of the Flotation of an Ore Containing Bastnaesite and Monazite: Kinetic Study and Process Flowsheet Simulation

Flotation recovery of monazite from kaolinite using sodium oleate collector: Understanding mineral–collector interaction

Assessment of the impact of grinding conditions and water quality on the flotation of rare earth elements bearing minerals using hydroxamic acid

Recent process developments in beneficiation and metallurgy of rare earths: A review

A review of flotation reagents for bastnäsite-(Ce) rare earth ore

Constraining the Economic Potential of By-Product Recovery by Using a Geometallurgical Approach: The Example of Rare Earth Element Recovery at Catalão I, Brazil

Comprehensive mineralogical and technological characterisation of the Araxá (SE Brazil) complex REE (Nb-P) ore, and the fate of its processing

Gravity-based pre-concentration strategies for complex rare earth ore containing niobium and zirconium

Recovery of Rare Earth from Bastnasite by Ammonium Chloride Roasting with Fluorine Deactivation

Selective Extraction of Rare Earth Elements from Monazite Ores with High Iron Content

Hydrothermal mineral replacement of bastnäsite by rhabdophane and monazite: effects of temperature on mineralogy, REE immobilisation, and fractionation

Hydrometallurgical Processing of Bastnasite Ore: A Theoretical Approach Using Pourbaix (Eh–pH) Diagrams

Automated SEM Mineral Liberation Analysis (MLA) with Generically Labelled EDX Spectra in the Mineral Processing of Rare Earth Element Ores

Development of Process Flow Sheet for Recovering Strategic Mineral Monazite from a Lean-Grade Bramhagiri Coastal Placer Deposit, Odisha, India

Collector Chemistry for Bastnaesite Flotation – Recent Developments

Decomposition Model of Bastnaesite and Its Fluorine Oxygen Coupling Escape Mechanism

Development of a physical separation pre-concentration process for the extraction of Rare Earth bearing ore

Exploring rare earth mineral recovery through characterization of riebeckite type ore in Bayan Obo

Iron Oxide-Copper Mineral Associations in Supergene Zones: Insights into Flotation Challenges and Optimization Using Response Surface Methodology

Recovery of Rare Earth Elements from Mining Tailings: A Case Study for Generating Wealth from Waste

Flotation of Seafloor Massive Sulfide Ores: Combination of Surface Cleaning and Deactivation of Lead-Activated Sphalerite to Improve the Separation Efficiency of Chalcopyrite and Sphalerite