Abstract:Handheld (portable) X-ray fluorescence (pXRF) instruments are designed for use in the exploration for base metals, precious metals, and specialty metals (e.g. rare earth elements (REE), Ta, and Nb) and allow rapid decision-making directly in the field. This paper evaluates the technical merits and limitations of pXRF technology in the exploration for specialty metals using data generated from the analysis of three geochemical standards and a silica blank: Standard Reference Material NIST 2780 from the National Institute of Standards and Technology, Gaithersburg; the Certified Reference Material “TRLK” Rare Earth Ore “CGL 124” from the Mongolia Central Geological Laboratory; the Reference Niobium Ore OKA-1 (CANMET); and a silica blank described as Si (IV) oxide (99.8 % on metal basis) from Alpha Aesar (Ward Hill, MA, USA). The data was acquired over a period of nearly 2 years as a by-product of several distinct specialty metal-related projects using the same pXRF instrument and the same settings. Instrumental analytical accuracy was determined using the percent difference (%diff) between the average concentrations of the pXRF instrument readings and the reported certified values of the standard. Percent relative standard deviation (%RSD) was used as a measure of precision. Smaller %diff and %RSD indicate more accurate and precise data, and the accuracy and precision of the pXRF depended strongly on the elemental concentrations in the standards used. Box and whisker diagrams were used to illustrate characteristics of pXRF data sets (mean, lower and upper quartiles, and range) corresponding to individual standards. The bias of the pXRF determinations (under/overestimation) relative to certified values of individual standards are also depicted on these diagrams. This study indicates that the pXRF was capable of producing readings for Si, K, Al, Fe, Ca, Ti, Pb, Zn, Sr, Ag, Cd, Th, Sb, P, S, Mo, Mn, Mg, As, Nb, Rb, La, Ce, Pr, Nd, and Y within 10 %RSD of the reported certified value in at least one of the three standards measured, depending on the concentrations within that standard. The instrument was able to provide relatively accurate and precise data for Nd, Pr, Ce, La, and Y (%diff, ≤17; %RSD, ≤3.7) when the concentrations were greater than 1,000 ppm (e.g., rare earth ore CGL 124). It generated lower quality data (in terms of %diff and %RSD) when concentrations of these elements were in the hundreds parts per million range or lower (NIST 2780). As for Nb, the best %RSD (2.2) was obtained on the Nb Ore OKA-1 with an accompanying %diff of 34. This indicates that the instrument is suitable for use in the exploration and development of carbonatite-related REE deposits such as: Mountain Pass (California), Bayan Obo (Inner Mongolia), Wicheeda Lake (British Columbia), St Honoré, Oka, and Eldor (Quebec). By extension, the instrument is also suitable for the exploration of apatite–monazite veins (Steenkampskraal) and peralkaline intrusion-related deposits such as Kipawa, Nechalacho (Northwest Territories), or Strange Lake (Quebec; Labrador, Newfoundland). A pXRF without a radioactive source cannot be used to analyze for most of the heavy lanthanides; however, Y can be used as a pathfinder for these elements. Limited but effective use of the pXRF in exploration for ion adsorption clay deposits with grades as low as 500 ppm total REE appears possible. The pXRF could also be used in the exploration for carbonatite-related Nb-bearing deposits such as St Honoré (Quebec) and Aley (British Columbia), or in the exploration for lower-grade Nb–Ta deposits such as Upper Fir (British Columbia), justifying the need for future case studies.

Automated SEM Mineral Liberation Analysis (MLA) with Generically Labelled EDX Spectra in the Mineral Processing of Rare Earth Element Ores

Quantitative mineralogy of chromite ore based on imaging Laser Induced Breakdown Spectroscopy and Spectral Angle Mapper Classification Algorithm

Exploring rare earth elements in complex microscopic mineral phases: Inputs from μLIBS imaging

Laser-induced fluorescence (LiF) spectroscopy for detecting REE cross-contaminations in the Smithsonian rare-earth element phosphate standards

High-energy interference-free K-lines synchrotron X-ray fluorescence microscopy of rare earth elements in hyperaccumulator plants

Descriptive Process Mineralogy to Evaluate Physical Enrichment Potential of Malatya/Kuluncak Rare Earth Ore through MLA

Distinguishing xenotime and zircon in ores and estimating the xenotime content for on-site analysis

Quantifying Common Major and Minor Elements in Minerals/rocks by Economical Desktop Scanning Electron Microscopy/silicon Drift Detector Energy-Dispersive Spectrometer (SEM/SDD-EDS)

Mineral Characterization Using Scanning Electron Microscopy (SEM): A Review of the Fundamentals, Advancements, and Research Directions

Determination of Rare Earth Elements in Geological Samples Using Laser-Induced Breakdown Spectroscopy (LIBS)

Automated Quantitative Characterization REE Ore Mineralogy from the Giant Bayan Obo Deposit, Inner Mongolia, China

An assessment of a handheld X-ray fluorescence instrument for use in exploration and development with an emphasis on REEs and related specialty metals

Rare Earth Extraction with lonquest® 801 initial modelling development

Mineralogical characteristic and beneficiation evaluation of rare earth carbonate wall rock

Highly Efficient and Selective Recovery of Rare Earth Elements Using Mesoporous Silica Functionalized by Preorganized Chelating Ligands

Rare Earth Element (REE) Speciation in Municipal Solid Waste Incineration Ash

The Process Mineralogical Characterization of Bayan Obo Rare-Earth Tailings and Density Functional Theory Study of the Occurrence State of Sc

Application of Raman Spectroscopy for the Identification of Phosphate Minerals from REE Supergene Deposit

Basis for a new process for producing REE oxides from Dicranopteris linearis

Tracking element-mineral associations with unsupervised learning and dimensionality reduction in chemical and optical image stacks of thin sections