Abstract:High average power, all-fiber integrated, broadband supercontinuum (SC) sources are demonstrated. Architecture for SC generation using amplified picosecond/nanosecond laser diode (LD) pulses followed by modulation instability (MI) induced pulse breakup is presented and used to demonstrate SC sources from the mid-IR to the visible wavelengths. In addition to the simplicity in implementation, this architecture allows scaling up of the SC average power by increasing the pulse repetition rate and the corresponding pump power, while keeping the peak power, and, hence, the spectral extent approximately constant. Using this process, we demonstrate >10W in a mid-IR SC extending from ∼0.8 to 4μm, >5W in a near IR SC extending from ∼0.8 to 2.8μm, and >0.7W in a visible SC extending from ∼0.45 to 1.2μm. SC modulation capability is also demonstrated in a mid-IR SC laser with ∼3.9W in an SC extending from ∼0.8 to 4.3μm. The entire system and SC output in this case is modulated by a 500Hz square wave at 50% duty cycle without any external chopping or modulation. We also explore the use of thulium doped fiber amplifier (TDFA) stages for mid-IR SC generation. In addition to the higher pump to signal conversion efficiency demonstrated in TDFAs compared to erbium/ytterbium doped fiber amplifier (EYFA), the shifting of the SC pump from ∼1.5 to ∼2μm is pursued with an attempt to generate a longer extending SC into the mid-IR. We demonstrate ∼2.5 times higher optical conversion efficiency from pump to SC generation in wavelengths beyond 3.8μm in the TDFA versus the EYFA based SC systems. The TDFA SC spectrum extends from ∼1.9 to 4.5μm with ∼2.6W at 50% modulation with a 250 Hz square wave. A variety of applications in defense, health care and metrology are also demonstrated using the SC laser systems presented in this paper.

Advances in mid-infrared spectroscopy enabled by supercontinuum laser sources

Sensitivity-enhanced Fourier transform mid-infrared spectroscopy using a supercontinuum laser source

All-fiber mid-infrared supercontinuum generation pumped by ultra-low repetition rate noise-like pulse mode-locked fiber laser

Compact and efficient high-power mid-infrared supercontinuum fiber laser source based on a noise-like pulse and germania fiber

Recent advances in supercontinuum generation in specialty optical fibers [Invited]

Broadband Mid-Infrared Supercontinuum Generation in Dispersion-Engineered As2S3-silica Nanospike Waveguides Pumped by 2.8 Μm Femtosecond Laser

High-Power Solid-State Near- and Mid-IR Ultrafast Laser Sources for Strong-Field Science

Ultrafast supercontinuum generation in bulk condensed media (Invited Review)

Ultrafast Ultraviolet C and Visible Laser Light with Broadly Tunable Spectrum

Intense Two-Octave Ultraviolet-Visible-Infrared Supercontinuum Laser via High-Efficiency One-Octave Second-Harmonic Generation

Spatiotemporal Characterization of Supercontinuum Extending from the Visible to the Mid-Infrared in Multimode Graded-Index Optical Fiber

Modulation instability initiated high power all-fiber supercontinuum lasers and their applications

Infrared frequency combs and supercontinua for multiplex high sensitivity spectroscopy

Low-noise octave-spanning mid-infrared supercontinuum generation in a multimode chalcogenide fiber

2 Mu M Femtosecond Fiber Laser Source And Its Application For Mid-Ir Supercontinuum Generation

A six-octave optical frequency comb from a scalable few-cycle erbium fiber laser

Deep-UV to mid-IR supercontinuum generation driven by mid-IR ultrashort pulses in a gas-filled fiber

Mid-IR Supercontinuum Generation in a Silicon Nitride loaded Lithium Niobate on Sapphire Waveguide

Frequency-Resolved Spatial Beam Mapping in Multimode Fibers: Application to Mid-Infrared Supercontinuum Generation

Long-wave-infrared pulse production at 11 μm via difference-frequency generation driven by femtosecond mid-infrared all-fluoride fiber laser

Multi-octave infrared femtosecond continuum generation in Cr:ZnS-GaSe and Cr:ZnS-ZGP tandems