Event-triggered background-oriented schlieren: high-frequency visualization of a heated jet flow

Zhen Lyu,Weiwei Cai,Yingzhneg Liu

DOI: https://doi.org/10.1364/ol.515700

IF: 3.6

2024-05-04

Optics Letters

Abstract:Zhen Lyu, Weiwei Cai, Yingzhneg Liu This Letter reports a novel, to our knowledge, event-triggered background-oriented schlieren (EBOS) technique using a combination of an ... [Opt. Lett. 49, 2565-2568 (2024)]

optics

What problem does this paper attempt to address?

Event-based Background-Oriented Schlieren

Shintaro Shiba,Friedhelm Hamann,Yoshimitsu Aoki,Guillermo Gallego

DOI: https://doi.org/10.1109/TPAMI.2023.3328188

2023-11-01

Abstract:Schlieren imaging is an optical technique to observe the flow of transparent media, such as air or water, without any particle seeding. However, conventional frame-based techniques require both high spatial and temporal resolution cameras, which impose bright illumination and expensive computation limitations. Event cameras offer potential advantages (high dynamic range, high temporal resolution, and data efficiency) to overcome such limitations due to their bio-inspired sensing principle. This paper presents a novel technique for perceiving air convection using events and frames by providing the first theoretical analysis that connects event data and schlieren. We formulate the problem as a variational optimization one combining the linearized event generation model with a physically-motivated parameterization that estimates the temporal derivative of the air density. The experiments with accurately aligned frame- and event camera data reveal that the proposed method enables event cameras to obtain on par results with existing frame-based optical flow techniques. Moreover, the proposed method works under dark conditions where frame-based schlieren fails, and also enables slow-motion analysis by leveraging the event camera's advantages. Our work pioneers and opens a new stack of event camera applications, as we publish the source code as well as the first schlieren dataset with high-quality frame and event data. <a class="link-external link-https" href="https://github.com/tub-rip/event_based_bos" rel="external noopener nofollow">this https URL</a>

Computer Vision and Pattern Recognition,Image and Video Processing
Selection of Object Plane and Arrangement of Knife Edge for a Schlieren System

Hua LI,Zang-jian YANG,Min WU,Zeng-liang GAO,Ying-jie ZHONG

DOI: https://doi.org/10.3969/j.issn.1672-9897.2011.03.020

2011-01-01

Abstract:Schlieren method is an important measurement technology for flow visualization.The device should be systematically regulated before the experiment.Selection of the object plane and arrangement of the knife edge are the key aspects for schlieren information.The light deflection in a flame and the schlieren measurement results of the flame were employed for this work.Characteristics of the images from different object planes were studied and compared.The disappearance of shadows of the tested objects can indeed be considered as a sensitive criterion for accurate focus.Movement direction of the knife edge,focus location and insertion degree of the knife edge were discussed based on the principle of schlieren method and relationship between insertion degree of the knife edge and the schlieren images.This paper will be useful for the flow visualization measurement by means of schlieren method.
Computerized background-oriented schlieren

G. Meier

DOI: https://doi.org/10.1007/s00348-002-0450-7

IF: 2.797

2002-07-01

Experiments in Fluids

Abstract:Abstract. A schlieren measurement technique based on computer evaluation of image variations due to refractive index variations in the propagation medium is presented; in what follows, this concept is referred to as the "background-oriented schlieren" (BOS) method. The differences between BOS and other optical techniques for refractive index measurement are the governing role of numerical methods, the extremely small amount of optical equipment, the high accuracy, the bidirectional sensitivity, the fast evaluation, and the missing field limitations. The principle of the method is the numerical comparison of a schlieren distorted and an undistorted image of a deliberate background. The method has become usable in practice owing to the immense progress in computing power and to newly developed fast-correlation algorithms. The extension of this method to space resolving techniques is possible. Some experimental studies show the applicability. Examples are a mixing turbulent jet, a supersonic jet, a shed vortex, and the sound wave of a gun shot. These few results underline the encouraging prospect for the future applicability of this technique. The BOS method offers not only the possibility of qualitative and quantitative schlieren investigations but also has the potential to determine density fields by integration of the measured gradient fields.

engineering, mechanical,mechanics
Projected moving patterns for reference-free background-oriented schlieren technique (BOS)

Markus Raffel,Nathanial T. Smith,Christian Wolf,James T Heinecke,Anthony D. Gardner

DOI: https://doi.org/10.1088/1361-6501/ad7165

IF: 2.398

2024-08-25

Measurement Science and Technology

Abstract:A background-oriented schlieren technique (BOS) using projected background patterns is presented. The projected backgrounds can be scaled to the measurement requirements, providing greater flexibility than printed backgrounds. The evaluation of the BOS image pairs using cross-correlation or optical flow analysis was demonstrated to produce equivalent results. The background pattern can dynamically be shifted by a rotating mirror, allowing evaluation using the reference-free shadowgraphy or reference-free BOS methods. The forward BOS technique is demonstrated, in which a projected speckle pattern is illuminated through a density object and recorded by a camera focused on the screen. In contrast to standard shadowgraphy, where the local image intensity is the parameter proportional the second derivative of density, this technique is robust with respect to varying lighting of the field as long as the displacement of small-scale image structures can be determined.

engineering, multidisciplinary,instruments & instrumentation
Simultaneous Recording of Shadowgrams and Schlieren Images for the Study of Plasma Assisted Aerodynamics

Jose Marcio Machado,Shiyou Yang,Nancy-Mieko Abe,Angelo Passaro

DOI: https://doi.org/10.3233/jae-2010-1108

2010-01-01

International Journal of Applied Electromagnetics and Mechanics

Abstract:This work describes an optical device for the simultaneous recording of shadowgrams and schlieren images, and some results are presented concerning its applications to the study of plasma assisted flow control in airfoil models. This approach offers many advantages in comparison to other methods, specially because the use of tracer particles (like smoke in wind tunnels) is not required for the experiments, thus avoiding contaminations in the electric discharges or air flows. Besides, while schlieren images reveal the refractive index gradients in the area of study, shadowgrams detect the second order spatial derivatives of the refractive indexes. Therefore, the simultaneous recording of these different images may give interesting information about the phenomena under study. In this paper, these images were used to confirm the existence of vortex structures in the flow induced by corona discharges on airfoil models. These structures are a possible explanation for the effects of drag reduction and lift force increasing, which have been reported in experiments of plasma assisted Aerodynamics.
Investigation Of Helium Atmospheric Pressure Plasma Jet By Schlieren Visualization

Nan Jiang,Jinglong Long Yang,Feng He,ZeXian Cao

DOI: https://doi.org/10.1109/TPS.2011.2127493

IF: 1.368

2011-01-01

IEEE Transactions on Plasma Science

Abstract:An optical schlieren system was used to visualize helium gas flow in ambient. Simultaneous photographing of gas flows and plasma plumes helps to reveal more details of atmospheric pressure plasma jet.
Physically based simulation of focusing schlieren imaging for a hypersonic boundary layer flow

Mingjia Chen,Bing Liu,Fei Qin,Xiao Liu,Bo Zhou

DOI: https://doi.org/10.1364/ao.509665

IF: 1.9

2024-01-26

Applied Optics

Abstract:Mingjia Chen, Bing Liu, Fei Qin, Xiao Liu, Bo Zhou Focusing schlieren systems are more advantageous than conventional schlieren systems in providing a schlieren image with certain spatial ... [Appl. Opt. 63, A44-A51 (2024)]

optics
Background-oriented schlieren technique for two-dimensional visualization of convective indoor air flows

Lia Becher,Conrad Voelker,Volker Rodehorst,Michael Kuhne

DOI: https://doi.org/10.1016/j.optlaseng.2020.106282

IF: 5.666

2020-11-01

Optics and Lasers in Engineering

Abstract:<p>This article focuses on further developments of the background-oriented schlieren (BOS) technique to visualize convective indoor air flow, which is usually defined by very small density gradients. Since the light rays deflect when passing through fluids with different densities, BOS can detect the resulting refractive index gradients as integration along a line of sight. In this paper, the BOS technique is used to yield a two-dimensional visualization of small density gradients. The novelty of the described method is the implementation of a highly sensitive BOS setup to visualize the ascending thermal plume from a heated thermal manikin with temperature differences of minimum 1 K. To guarantee steady boundary conditions, the thermal manikin was seated in a climate laboratory. For the experimental investigations, a high-resolution DLSR camera was used capturing a large field of view with sufficient detail accuracy. Several parameters such as various backgrounds, focal lengths, room air temperatures, and distances between the object of investigation, camera, and structured background were tested to find the most suitable parameters to visualize convective indoor air flow. Besides these measurements, this paper presents the analyzing method using cross-correlation algorithms and finally the results of visualizing the convective indoor air flow with BOS. The highly sensitive BOS setup presented in this article complements the commonly used invasive methods that highly influence weak air flows.</p>

optics
Isotropic resolution plenoptic background oriented schlieren through dual-view acquisition

Yulan Liu,Feng Xing,Liwei Su,Huijun Tan,Depeng Wang

DOI: https://doi.org/10.1364/oe.509628

IF: 3.8

2024-01-27

Optics Express

Abstract:Yulan Liu, Feng Xing, Liwei Su, Huijun Tan, Depeng Wang The key to uncovering underlying fluid mechanisms lies in high-resolution and large-scale three-dimensional (3D) measurements of flow ... [Opt. Express 32, 4603-4613 (2024)]

optics
The background oriented schlieren technique: sensitivity, accuracy, resolution and application to a three-dimensional density field

Erik Goldhahn,Jörg Seume

DOI: https://doi.org/10.1007/s00348-007-0331-1

IF: 2.797

2007-07-10

Experiments in Fluids

Abstract:Three-dimensional density information of a double free air jet was acquired using optical tomography. The projections of the density field were measured using the background oriented schlieren method (BOS). Preceding the free jet measurements, the sensitivity, accuracy and resolution of the BOS method were investigated. The sensitivity depends mostly on the focal length of the lens used, the relative position of the object between camera and background and the smallest detectable shift in the image plane. The accuracy was found to be sufficiently high to apply a tomographic reconstruction process. The resolution is determined by the transfer function of the BOS-method. It is not constant and depends on the size of the interrogation windows used for the cross-correlation-algorithm. The reconstruction of the free jet was computed, using filtered back projection. The reconstructed 3D density field shows with good resolution the typical diamond structure of the density distribution in under-expanded free jets.

engineering, mechanical,mechanics
Three-dimensional reconstruction of incident shock/boundary layer interaction using background-oriented schlieren

Chengpeng Wang,Pei Xu,Longsheng Xue,Yun Jiao

DOI: https://doi.org/10.1016/j.actaastro.2019.01.002

IF: 2.954

2019-04-01

Acta Astronautica

Abstract:To study the three-dimensional flow structure of an incident shock/boundary layer interaction, a M2.7 nozzle model with a ramp was tested based on the background-oriented schlieren (BOS) technique. After comparing the results of CFD, shear-sensitive liquid crystal (SSLC), and high-speed schlieren, we conclude that BOS can capture the internal structure of the flow field and that its results are consistent with those of other methods in which the relative error can be controlled to 7%. In this research, a new type of experiment with several light paths was used with BOS technology. Three-dimensional reconstruction of incident oblique shock (primarily the width of Mach stem of the shock wave) and quantitative results of the flow field can be obtained successfully, and BOS shows great potential for the measurement of flow fields.

engineering, aerospace
A Mini-Review of Recent Developments in Plenoptic Background-Oriented Schlieren Technology for Flow Dynamics Measurement

Yulan Liu,Feng Xing,Liwei Su,Huijun Tan,Depeng Wang

DOI: https://doi.org/10.3390/aerospace11040303

IF: 2.66

2024-04-12

Aerospace

Abstract:To uncover the underlying fluid mechanisms, it is crucial to explore imaging techniques for high-resolution and large-scale three-dimensional (3D) measurements of the flow field. Plenoptic background-oriented schlieren (Plenoptic BOS), an emerging volumetric method in recent years, has demonstrated being able to resolve volumetric flow dynamics with a single plenoptic camera. The focus-stack-based plenoptic BOS system can qualitatively infer the position of the density gradient in 3D space based on the relative sharpness of the refocused BOS image. Plenoptic BOS systems based on tomography or specular enhancement techniques are realized for use in high-fidelity 3D flow measurements due to the increased number of acquisition views. Here, we first review the fundamentals of plenoptic BOS, and then discuss the system configuration and typical application of single-view and multi-view plenoptic BOS. We also discuss the related challenges and outlook on the potential development of plenoptic BOS in the future.

engineering, aerospace
Pocket Schlieren: a background oriented schlieren imaging platform on a smartphone

Diganta Rabha,Vimod Kumar,Akshay Kumar,Dinesh Saini,Manish Kumar

2024-04-16

Abstract:Background-oriented schlieren (BOS) is a powerful technique for flow visualization. Nevertheless, the widespread dissemination of BOS is impeded by its dependence on scientific cameras, computing hardware, and dedicated analysis software. In this work, we aim to democratize BOS by providing a smartphone based scientific tool called "Pocket Schlieren". Pocket Schlieren enables users to directly capture, process, and visualize flow phenomena on their smartphones. The underlying algorithm incorporates consecutive frame subtraction (CFS) and optical flow (OF) techniques to compute the density gradients inside a flow. It performs on both engineered and natural background patterns. Using Pocket Schlieren, we successfully visualized the flow produced from a burning candle flame, butane lighter, hot soldering iron, room heater, water immersion heating rod, and a large outdoor butane flame. Pocket Schlieren promises to serve as a frugal yet potent instrument for scientific and educational purposes. We have made it publicly available at doi:

Human-Computer Interaction,Physics Education,Optics
Schlieren and Electrolytic Visualization of Fluid Flows

Chashechkin, Yu. D.

DOI: https://doi.org/10.1134/s1063784224700373

2024-06-05

Technical Physics

Abstract:The study of the visual images of fluid flows is ongoing and has intensified in recent years by advancements in light sources and receivers. Both classical schlieren instruments of the IAB series and original developments acquired new qualities. The selection of the source and visualizing diaphragm shapes allow to register the fields of various components of the reflectivity and density gradient in stratified flows (examples are given). Anodic oxidation of tin–electrolytic precipitation–is used to visualize matter transfer from a compact source. The structure of the flow pattern around a horizontally moving sphere is visualized in a wide range of parameters.

physics, applied
Shedding Light on Gas-Dynamic Effects in Laser Beam Fusion Cutting: The Potential of Background-Oriented Schlieren Imaging (BOS)

Silvana Burger,Karen Schwarzkopf,Florian Klämpfl,Michael Schmidt

DOI: https://doi.org/10.3390/s23020729

2023-01-09

Abstract:In laser beam fusion cutting of metals, the interaction of the gas jet with the melt determines the dynamics of the melt extrusion and the quality of the resulting cutting kerf. The gas-dynamic phenomena occurring during laser beam cutting are not fully known, especially regarding temporal fluctuations in the gas jet. The observation of gas and melt dynamics is difficult because the gas flow is not directly visible in video recordings and access to the process zone for observation is limited. In this study, the problem of imaging the gas jet from the cutting nozzle is addressed in a novel way by utilizing the striation pattern formed at the cutting kerf as a background pattern for background-oriented Schlieren imaging (BOS). In this first feasibility study, jets of different gas nozzles were observed in front of a solidified cutting kerf, which served as a background pattern for imaging. The results show that imaging of the characteristic shock diamonds of cutting nozzles is possible. Furthermore, the resulting shock fronts from an interaction of the gas jet with a model of a cutting front can be observed. The possibility of high-speed BOS with the proposed method is shown, which could be suitable to extend the knowledge of gas-dynamic phenomena in laser beam fusion cutting.
Pulsed Schlieren Imaging of Ultrasonic Haptics and Levitation using Phased Arrays

Michele Iodice,William Frier,James Wilcox,Ben Long,Orestis Georgiou

DOI: https://doi.org/10.48550/arXiv.1810.00258

IF: 4.506

2018-09-29

Medical Physics

Abstract:Ultrasonic acoustic fields have recently been used to generate haptic effects on the human skin as well as to levitate small sub-wavelength size particles. Schlieren imaging and background-oriented schlieren techniques can be used for acoustic wave pattern and beam shape visualization. These techniques exploit variations in the refractive index of a propagation medium by applying refractive optics or cross-correlation algorithms of photographs of illuminated background patterns. Here both background-oriented and traditional schlieren systems are used to visualize the regions of the acoustic power involved in creating dynamic haptic sensations and dynamic levitation traps. We demonstrate for the first time the application of back-ground-oriented schlieren for imaging ultrasonic fields in air. We detail our imaging apparatus and present improved algorithms used to visualize these phenomena that we have produced using multiple phased arrays. Moreover, to improve imaging, we leverage an electronically controlled, high-output LED which is pulsed in synchrony with the ultrasonic carrier frequency.
Schlieren Imaging of Air-coupled Ultrasound

,Edward Ginzel

DOI: https://doi.org/10.58286/30294

2024-10-01

Abstract:Schlieren imaging uses changes in the refractive index of a medium to permit visualisation of pressure changes in the medium. Schlieren images have been used to observe turbulent convection flow off heat sources, shock waves from bullets, jets and rockets. For a while, in nondestrructive testing it was a popular option to see beam shapes associated with immersion ultrasonic probes as well as pulse-interactions in immersion test conditions. From the perspective of sound transmission, air can be considered another form of a fluid. Although schlieren imaging has been used to illustrate shockwaves in air, the challenge of imaging ultrasound sound in air is significant, primarily due to the extremely high attenuation. This article provides a description of the techniques used to image ultrasound in air using several air-coupled ultrasonic transducers.
Characterization of Supersonic Jet and Shock Wave with High-Resolution Quantitative Schlieren Imaging

Yung-Kun Liu,Ching-En Lin,Jiwoo Nam,Pisin Chen

2024-11-21

Abstract:This paper presents an enhanced optical configuration for a single-pass quantitative Schlieren imaging system that achieves an optical resolution of approximately 4.6 micrometers. The modified setup decouples sensitivity from resolution, enabling independent optimization of these critical parameters. Using this high-resolution system, we conduct quantitative analyses of supersonic jets emitted from sub-millimeter nozzles into the atmosphere and investigate shock waves induced by knife blades interacting with these jets in a vacuum environment. The fine resolution allows for detailed visualization of shock wave structures and accurate measurement of density gradients. We demonstrate the system's effectiveness by examining the density gradient profile along the shock diamonds and mapping density profiles across shock waves. These density profiles are analyzed for their relevance in laser-plasma applications, including laser wakefield acceleration and the Analog Black Hole Evaporation via Laser (AnaBHEL) experiment. Our findings indicate that this system can help determine key parameters such as peak density, plateau length, and shock wave thickness-essential for optimizing electron acceleration and achieving specific plasma density profiles. This high-resolution quantitative Schlieren imaging technique thus serves as a valuable tool for exploring complex fluid dynamics and supporting advancements in laser-plasma physics research.

Optics,Fluid Dynamics
Optical-flow-based background-oriented schlieren technique for measuring a laser-induced underwater shock wave

Keisuke Hayasaka,Yoshiyuki Tagawa,Tianshu Liu,Masaharu Kameda

DOI: https://doi.org/10.1007/s00348-016-2271-0

2016-10-01

Abstract:The background-oriented schlieren (BOS) technique with the physics-based optical flow method (OF-BOS) is developed for measuring the pressure field of a laser-induced underwater shock wave. Compared to BOS with the conventional cross-correlation method in PIV (called PIV-BOS), by using the OF-BOS, the displacement field generated by the small density gradient in water can be obtained at the spatial resolution of one vector per pixel. The corresponding density and pressure fields can be further extracted. It is particularly demonstrated that the sufficiently high spatial resolution of the extracted displacement vector field is required in the tomographic reconstruction to correctly infer the pressure field of the spherical underwater shock wave. The capability of the OF-BOS is critically evaluated based on synchronized hydrophone measurements. Special emphasis is placed on direct comparison between the OF-BOS with the PIV-BOS.

Fluid Dynamics
Tomographic Background-Oriented Schlieren for Axisymmetric and Weakly Non-Axisymmetric Supersonic Jets

Tong Jia,Jiawei Li,Jie Wu,Yuan Xiong

DOI: https://doi.org/10.3390/sym16050596

2024-05-12

Symmetry

Abstract:The Schlieren technique is widely adopted for visualizing supersonic jets owing to its non-invasiveness to the flow field. However, extending the classical Schlieren method for quantitative refractive index measurements is cumbersome, especially for three-dimensional supersonic flows. Background-oriented Schlieren has gained increasing popularity owing to its ease of implementation and calibration. This study utilizes multi-view-based tomographic background-oriented Schlieren (TBOS) to reconstruct axisymmetric and weakly non-axisymmetric supersonic jets, highlighting the impact of flow axisymmetry breaking on TBOS reconstructions. Several classical TBOS reconstruction algorithms, including FDK, SART, SIRT, and CGLS, are compared quantitatively regarding reconstruction quality. View spareness is identified to be the main cause of degraded reconstruction quality when the flow experiences axisymmetry breaking. The classic visual hull approach is explored to improve reconstruction quality. Together with the CGLS tomographic algorithm, we successfully reconstruct the weakly non-axisymmetric supersonic jet structures and confirm that increasing the nozzle bevel angle leads to wider jet spreads.

multidisciplinary sciences

Event-triggered background-oriented schlieren: high-frequency visualization of a heated jet flow

Event-based Background-Oriented Schlieren

Selection of Object Plane and Arrangement of Knife Edge for a Schlieren System

Computerized background-oriented schlieren

Projected moving patterns for reference-free background-oriented schlieren technique (BOS)

Simultaneous Recording of Shadowgrams and Schlieren Images for the Study of Plasma Assisted Aerodynamics

Investigation Of Helium Atmospheric Pressure Plasma Jet By Schlieren Visualization

Physically based simulation of focusing schlieren imaging for a hypersonic boundary layer flow

Background-oriented schlieren technique for two-dimensional visualization of convective indoor air flows

Isotropic resolution plenoptic background oriented schlieren through dual-view acquisition

The background oriented schlieren technique: sensitivity, accuracy, resolution and application to a three-dimensional density field

Three-dimensional reconstruction of incident shock/boundary layer interaction using background-oriented schlieren

A Mini-Review of Recent Developments in Plenoptic Background-Oriented Schlieren Technology for Flow Dynamics Measurement

Pocket Schlieren: a background oriented schlieren imaging platform on a smartphone

Schlieren and Electrolytic Visualization of Fluid Flows

Shedding Light on Gas-Dynamic Effects in Laser Beam Fusion Cutting: The Potential of Background-Oriented Schlieren Imaging (BOS)

Pulsed Schlieren Imaging of Ultrasonic Haptics and Levitation using Phased Arrays

Schlieren Imaging of Air-coupled Ultrasound

Characterization of Supersonic Jet and Shock Wave with High-Resolution Quantitative Schlieren Imaging

Optical-flow-based background-oriented schlieren technique for measuring a laser-induced underwater shock wave

Tomographic Background-Oriented Schlieren for Axisymmetric and Weakly Non-Axisymmetric Supersonic Jets