Abstract:Chemical looping combustion (CLC) is a novel technology with inherent CO2 capture, especially for solid fuels. The existence of ash in solid fuels is one major challenge for CLC technology development. In this work, interaction between an iron-based oxygen carrier and four different types of coal ash was studied in a laboratory-scale fluidized reactor. Different factors - the ash component, the redox cycle number, and the ash size - were taken into account. Chemical composition of the ash had effect on the reduction time from Fe2O3 to Fe3O4 in the fluidized bed. The presence of reactive components (such as Fe2O3 and CaSO4) in the ash, functioning as oxygen carriers, extended the reduction time. However, the chemical combination between the ash contents and the carrier can shorten the reduction time. The effect of ash on the carrier's reactivity depended on the ash type. Most ashes decreased the reactivity of the carrier, except the ash mainly composed of CaSO4 which showed an increased reactivity due to the deposited reactive CaSO4. The effect of ash on decreasing the carrier's reactivity increased with the cycles. Meanwhile, the larger ash (900-1000 mu m) corresponded to a higher CO conversion, and thus had less effect on the reactivity than the smaller ash (300-400 mu m). This occurrence can be attributed to the non-uniform solid-solid contact between the larger ash and the carrier. Sintering and agglomeration of the carrier particles occurred in the existence of most ashes, except the lignite ash enriched in CaO. Ash deposition and the formation of new compounds were detected. One common compound formed in the presence of SiO2-rich ash was Fe2SiO4, which has a low melt point (1170 degrees C) and a low thermal conductivity with a greater adhesion. The physical ash deposition and the formation of Fe2SiO4 through chemical reactions were proposed to be the main reasons for the effect of ash on the carrier's reactivity and the occurrence of sintering and agglomeration. The existence of ash not only has impact on the carrier's reactivity, but also causes solid fluidization disturbances. More effort is deserved to put into the ash-related issue in solid fuel CLC. (C) 2013 Elsevier Ltd. All rights reserved.

Effect of reaction conditions on the agglomeration of the oxygen carrier in biomass chemical looping gasification

Effect of preparation of iron-based oxygen carriers on its agglomeration behavior with application to biomass chemical looping gasification

Impact of Particle Size Polydispersity on Chemical Looping Combustion of Biomass under a Continuous Injection Mode

Biomass ash chemistry in chemical looping combustion: Interaction mechanism of potassium-ash and iron-based oxygen carriers

Effects of operating conditions and reactor structure on biomass entrained-flow gasification

Experimental and kinetics analysis on biomass chemical looping gasification using lean iron ore as oxygen carrier

Numerical study of a chemical looping combustion system: Effects of fuel type and particle size distributions on the operating performance

Chemical Looping Gasification of High-Moisture Content Biomass: the Interactions Between H2O and Oxygen Carrier

Reactivity investigation on chemical looping gasification of coal with Iron-Manganese based oxygen carrier

Effect of ash on the performance of iron-based oxygen carrier in the chemical looping gasification of municipal sludge

Effect of alkali metals and alkaline earth metals on promotion and agglomeration of Fe-based oxygen carrier during chemical looping gasification

Hydrogen-rich syngas production with tar elimination via biomass chemical looping gasification (BCLG) using BaFe2O4/Al2O3 as oxygen carrier

Evaluation of CuO/MgAl2O4 in Biomass Chemical Looping Gasification with Oxygen Uncoupling

Reaction performance and mechanism of a NiO/Ca2Fe2O5 oxygen carrier in Chemical looping gasification of cellulose

Experimental Investigation of Fe–Ni–Al Oxygen Carrier Derived from Hydrotalcite-like Precursors for the Chemical Looping Gasification of Biomass Char

CO 2 utilization in chemical looping gasification and co-gasification of lignocellulosic biomass components over iron-based oxygen carriers: Thermogravimetric behavior, synergistic effect, and reduction characteristics

Ash chemistry in chemical looping process for biomass valorization: A review

Thermodynamic analysis and kinetic investigations on biomass char chemical looping gasification using Fe-Ni bimetallic oxygen carrier

Interaction Between Iron-Based Oxygen Carrier and Four Coal Ashes During Chemical Looping Combustion

Improving attrition resistance of oxygen carriers by biomass ash in chemical looping process

Insights into synergistic effects of oxygen content and reaction temperature on gas product emissions and solid product deposition behaviors during biomass gasification process