Converting lignocellulosic biomass into mesoporous carbons for the assessment of single adsorption equilibrium: the competing role of moisture and temperature on gaseous benzene adsorption

Kaan Isinkaralar
DOI: https://doi.org/10.1007/s13399-024-05844-3
IF: 4.05
2024-06-25
Biomass Conversion and Biorefinery
Abstract:For the present study, the activated carbon were obtained from Lotus corniculatus L. as waste biomass using carbonization at 700 °C and alkali potassium hydroxide (KOH) chemical activation technique. Single gaseous benzene (C 6 H 6 ) adsorption (SGBA) experiments were performed to benchmark the efficiency of the L. corniculatus -derived activated carbons (LCACs), which were LCAC2 (609 m 2 g −1 , KOH 1:2 w/w), LCAC3 (742 m 2 g −1 , KOH 1:3 w/w), and LCAC4 (826 m 2 g −1 , KOH 1:4 w/w), respectively. Also, the physicochemical properties of LCACs were characterized by Fourier Transform Infrared Spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and proximate-elemental assessment. The isotherm models (Langmuir and Freundlich) of C 6 H 6 demonstrate the complex adaptation results of LCAC4 at different relative humidity (RH) levels, and Freundlich isotherm is highly suitable to C 6 H 6 /LCAC4 as multilayer adsorption. Kinetic behavior was also analyzed and showed that of C 6 H 6 is well illustrated by the pseudo second order (PSOM). The C 6 H 6 competitive adsorption of LCAC2, LCAC3, and LCAC4 at 25 °C + 0 RH%, 25 °C + 80 RH%, 45 °C + 0 RH%, and 45 °C + 80 RH% corresponds to reductions of 12.9–11.6%, 7.8–11.5%, and 9.9–18.4%. The LCAC4 is confirmed to be a perfect adsorbent in the elimination of a single gaseous stream at 45 °C + 0 RH%. Regeneration showed that the LCAC4 maintained more than 25% of the initial adsorption capacity after five repeated adsorption–desorption cycles. The promising properties of LCAC4 are recommended to be exploited for the other volatile organic compounds in the gas phase in indoor environments, under the best conditions.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to evaluate the influence of converting waste biomass (Lotus corniculatus L.) into mesoporous carbon materials (LCACs) on the adsorption equilibrium of single - component benzene vapor, especially to investigate the competitive effect of humidity and temperature on the adsorption performance. Specifically, the research aims to: 1. **Synthesis and Characterization**: Prepare activated carbon (LCACs) with a high specific surface area from Lotus corniculatus L. (bird's - foot trefoil) waste, and conduct detailed characterization of its physicochemical properties by various technical means, such as BET, FT - IR, Raman spectroscopy, N2 adsorption - desorption, SEM and TGA, etc. 2. **Adsorption Performance Evaluation**: Study the adsorption performance of LCACs on single - component benzene vapor, especially the adsorption capacity under different relative humidity (0% and 80%) and temperature (25°C and 45°C) conditions, in order to determine the optimal adsorption conditions. 3. **Adsorption Mechanism Analysis**: Explore the adsorption mechanism of benzene molecules on LCACs through adsorption isotherm models (Langmuir and Freundlich) and kinetic models (pseudo - second - order kinetic model), especially the possibility of multi - layer adsorption. 4. **Regeneration Performance Testing**: Evaluate the regeneration performance of LCACs, that is, it can still maintain a high adsorption capacity after multiple adsorption - desorption cycles, in order to verify its feasibility and economy in practical applications. In general, this research not only reveals the excellent performance of LCACs in removing benzene molecules, but also provides a scientific basis for its potential application in indoor air pollution control.