Abstract:The electrically coupled composite electrolyte takes the merits of cross‐linked gel polymer and a well‐tuned antioxidant additive (4‐trifluoromethylphenylboronic acid, TFPBA). Based on the electrical coupling effect, polymer chains with electronegative groups can immobilize TFPBA to enhance its oxidative stability. The TFPBA with electron acceptor capability also can spontaneously adsorb onto the surface of the cathodes to participate in the formation of the CEI film containing favorable fluoroboron complexes and NaF, and play a key role in fixing PF6− to inhibit their excessive decomposition. As a result, the cell integrating the high‐voltage P2/O3 cathode and well‐tailored gel polymer electrolyte exhibits an impressive long‐term performance. Sodium‐ion batteries (SIBs) suffer from severe capacity decay as the harmful substances caused by the violent decomposition of electrolyte under high voltages continue to erode the cathodes. Therefore, the design of high‐voltage electrolyte and construction of robust cathode–electrolyte interface (CEI) are critical for long‐life SIBs. Herein, an electrically coupled composite electrolyte that takes the merits of cross‐linked gel polymers and s well‐tuned antioxidant additive (4‐trifluoromethylphenylboronic acid, TFPBA) is proposed. Through an electrical coupling effect, TFPBA can be anchored by the cross‐linked polymer framework to immobilize the PF6− anion and adsorb onto cathode surface spontaneously, both of which promote the formation of a robust CEI layer to facilitate Na+ transportation and suppress subsequent side reactions and corrosive cracking. As a result, the cells integrating high‐voltage P2/O3 cathode and well‐tailored gel polymer electrolyte achieve stable cycling over 550 cycles within 1.8–4.2 V with a capacity retention of 71.0% and a high‐rate discharge capacity of 77.4 mAh g−1 at 5 C. The work paves the way for the development of functionalized quasi‐solid electrolyte for practical next generation high‐voltage SIBs.

Pentafluoro(phenoxy)cyclotriphosphazene Stabilizes Electrode/Electrolyte Interfaces for Sodium‐Ion Pouch Cells of 145 Wh Kg−1

F and Si Dual-Doping Induced Oxygen Vacancies in a Na4Fe3(PO4)2P2O7 Cathode Enables Boosting Electrochemical Performance for Sodium Storage

Double additive electrolyte solvation engineering to achieve long cycle and high capacity sodium-ion battery

Enhanced High-Voltage Cyclability of LiNi0.5Co0.2Mn0.3O2-based Pouch Cells Via Lithium Difluorophosphate Introducing As Electrolyte Additive

A Thin Composite Polymer Electrolyte Functionalized by a Novel Antihydrolysis Additive to Enable All‐Solid‐State Lithium Battery with Excellent Rate and Cycle Performance

High Safety Electrolyte Design for Enabling High Energy‐Density System of LiNi0.8Co0.1Mn0.1O2//Phosphorus by Simultaneously Adjusting Dual Electrode/Electrolyte Interfaces

3-Trimethylsilyl-2-oxazolidinone, as a multifunctional additive to stabilize FEC-containing electrolyte for sodium metal batteries

Stabilized High-Voltage Cathodes via an F-Rich and Si-Containing Electrolyte Additive

In-situ constructing efficient gel polymer electrolyte with fluoride-rich interface enabling high-capacity, long-cycling sodium metal batteries

Electrically Coupled Electrolyte Engineering Enables High Interfacial Stability for High‐Voltage Sodium‐Ion Batteries

Optimizing NaF‐Rich Solid Electrolyte Interphase for Stabilizing Sodium Metal Batteries by Electrolyte Additive

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Insight into the probability of ethoxy(pentafluoro)cyclotriphosphazene (PFPN) as the functional electrolyte additive in lithium-sulfur batteries

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

Novel Composite Electrolyte Additive for Enhancing the Thermal and Cycling Stability of SiO/C Anode Li-ion Battery

Flame‐Retardant, Self‐Purging, High‐Voltage Electrolyte for Safe and Long‐Cycling Sodium Metal Batteries

High‐Voltage, Highly Reversible Sodium Batteries Enabled by Fluorine‐Rich Electrode/Electrolyte Interphases

Fluorinated and safety-reinforced copolymer solid electrolytes for high-voltage all-solid-state sodium metal batteries

Elastic Interfacial Layer Enabled the High‐Temperature Performance of Lithium‐Ion Batteries via Utilization of Synthetic Fluorosulfate Additive

Lithium Difluorophosphate As a Promising Electrolyte Lithium Additive for High-Voltage Lithium-Ion Batteries

Bicomponent Electrolyte Additive Excelling Fluoroethylene Carbonate for High Performance Si-based Anodes and Lithiated Si-S Batteries