Abstract:Conventional liquid electrolytes based sodium metal batteries suffer from severe safety hazards owing to electrolyte leakage, inflammability and dendritic sodium deposition. Herein, we report a flame-retardant quasi-solid polymer electrolyte with poly(methyl vinyl ether-alt-maleic anhydride) (P(MVE-alt-MA)) as host, bacterial cellulose (BC) as reinforcement, and triethyl phosphate/vinylene carbonate/sodium perchlorate (TEP/VC/NaClO4) as plasticizer for highly safe sodium metal batteries. The as-obtained quasi-solid polymer electrolyte exhibits superior flame retardancy (self-extinguish within 1 s), complete non-leakage property and wide electrochemical windows (4.4 V). More importantly, Na3V2(PO4)3/Na metal batteries using such polymer electrolyte delivers superior long-term cycling stability (84.4% capacity retention after 1000 cycles) which is significantly better than that (only 2% after 240 cycles) of liquid electrolyte. In addition, this flame-retardant quasi-solid polymer electrolyte provides favorable cycle performance (80.2% capacity retention after 70 cycles at 50 °C and 84.8% capacity retention after 50 cycles at −10 °C) for Na3V2(PO4)3/Na metal batteries. And this battery also displayed a normal charge/discharge property even at −15 °C. These fascinating cycle properties are mainly ascribed to the effective protective layers formed on Na3V2(PO4)3 cathode and sodium metal anode. More thorough investigation elucidates that such flame-retardant quasi-solid polymer electrolyte plays a multifunctional role in the advanced sodium metal batteries: (1) Being involved in the formation of a favorable cathode electrolyte interface (CEI) to inhibit the dissolution of vanadium and maintain the structure integrity of the Na3V2(PO4)3; (2) Participating in building a stable solid electrolyte interface (SEI) to suppress the growth of Na dendrites; (3) Integrating flame-retardance into polymer sodium batteries to enhance flame-resistance, eliminate electrolyte leakage, and thus improve safety of sodium batteries. Based on these results, we further assembled Na3V2(PO4)3/MoS2 pouch cell which can withstand harsh conditions (bended or cut off a corner), confirming the obtained polymer electrolyte with superior non-leakage property. In all, these outstanding characteristics would endow this flame-retardant quasi-solid polymer electrolyte a very promising candidate for highly-safe sodium metal batteries.

Flame‐Retardant, Self‐Purging, High‐Voltage Electrolyte for Safe and Long‐Cycling Sodium Metal Batteries

Flame-retardant electrolyte enables sodium metal batteries to limit dendrites and stabilize cycling

All‐Fluorinated Low‐Solvation Electrolytes for High‐Voltage Sodium Metal Batteries with Appealing Stability

Cyclotriphosphazene-based flame-retardant polymer electrolytes for high performance sodium metal batteries

Flame-retardant quasi-solid polymer electrolyte enabling sodium metal batteries with highly safe characteristic and superior cycling stability

Dual‐Anionic Coordination Manipulation Induces Phosphorus and Boron‐Rich Gradient Interphase Towards Stable and Safe Sodium Metal Batteries

Facile Design of Asymmetric Flame-Retardant Gel Polymer Electrolyte with Excellent Interfacial Stability for Sodium Metal Batteries

Fluoride‐Rich Solid‐Electrolyte‐Interface Enabling Stable Sodium Metal Batteries in High‐Safe Electrolytes

3-Trimethylsilyl-2-oxazolidinone, as a multifunctional additive to stabilize FEC-containing electrolyte for sodium metal batteries

In-situ constructing efficient gel polymer electrolyte with fluoride-rich interface enabling high-capacity, long-cycling sodium metal batteries

Highly Stable Sodium Metal Batteries Enabled by Manipulating the Fluorinated Organic Components of Solid‐Electrolyte‐Interphase

Inhibition of sodium dendrite by solvent structural reorganization for non-flammable high-performance sodium-metal batteries

Highly Adaptive Flame‐Retardant Electrolyte Endows Hard‐Carbon Anodes with Stable Interface Structure for High‐Safety Sodium‐Ion Batteries

Interacted Ternary Component Ensuring High-Security Eutectic Electrolyte for High Performance Sodium-Metal Batteries.

An in-situ formed stable interface layer for high-performance sodium metal anode in a non-flammable electrolyte

Electrically Coupled Electrolyte Engineering Enables High Interfacial Stability for High‐Voltage Sodium‐Ion Batteries

Coupling Anion‐Capturer with Polymer Chains in Fireproof Gel Polymer Electrolyte Enables Dendrite‐Free Sodium Metal Batteries

Fluorinated and safety-reinforced copolymer solid electrolytes for high-voltage all-solid-state sodium metal batteries

Additive‐guided Solvation‐regulated Flame‐retardant Electrolyte Enables High‐voltage Lithium Metal Batteries with Robust Electrode Electrolyte Interphases

An acetamide additive stabilizing ultra-low concentration electrolyte for long-cycling and high-rate sodium metal battery