Abstract:In-Space Services aim to introduce sustainable futuristic technology to support the current and growing orbital ecosystem. As the scale of space missions grows, there is a need for more extensive infrastructures in orbit. In-Space Assembly missions would hold one of the key responsibilities in meeting the increasing demand. In the forthcoming decades, newer infrastructures in the Earth's orbits, which are much more advanced than the International Space Station are needed for in-situ manufacturing, servicing, and astronomical and observational stations. The prospect of in-orbit commissioning a Large Aperture Space Telescope (LAST) has fuelled scientific and commercial interests in deep-space astronomy and Earth Observation. However, the in-situ assembly of such large-scale, high-value assets in extreme environments, like space, is highly challenging and requires advanced robotic solutions. This paper introduces an innovative dexterous walking robotic system for in-orbit assembly missions and considers the Large Aperture Space Telescope system with an aperture of 25 m as the use case. The top-level assembly requirements are identified with a deep insight into the critical functionalities and challenges to overcome while assembling the modular LAST. The design and sizing of an End-over-end Walking Robot (E-Walker) are discussed based on the design of the LAST and the specifications of the spacecraft platform. The E-Walker's detailed design engineering includes the structural finite element analysis results for space and earth-analogue design and the corresponding actuator selection methods. Results of the modal analysis demonstrate the deflections in the E-Walker links and end-effector in the open-loop due to the extremities present in the space environment. The design and structural analysis of E-Walker's scaled-down prototype is also presented to showcase its feasibility in supporting both in-orbit and terrestrial activities requiring robotic capabilities over an enhanced workspace. Further, the mission concept of operations is presented based on two E-Walkers that carry out the assembly of the mirror modules. The mission discussed was shortlisted after conducting an extensive trade-off study in the literature. Simulated results prove the dual E-Walker robotic system's efficacy for accomplishing complex in-situ assembly operations through task-sharing.

The new era of walking manipulators in space: Feasibility and operational assessment of assembling a 25 m Large Aperture Space Telescope in orbit

Design engineering a walking robotic manipulator for in-space assembly missions

Robotic Technologies for In-Orbit Assembly of a Large Aperture Space Telescope: A Review

Optimal Task-Space Tracking with Minimum Manipulator Reconfiguration

Design and Preliminary Ground Experiment for Robotic Assembly of a Modular Space Telescope

Towards robotic on-orbit assembly of large space telescopes: Mission architectures, concepts, and analyses

A Survey of Space Robotic Technologies for On-Orbit Assembly

A Walking Space Robot for On-Orbit Satellite Servicing: The ReCoBot

Autonomous Assembly Method of 3-Arm Robot to Fix the Multipin and Hole Load Plate on a Space Station

Robotic Manipulation and Capture in Space: A Survey

Trajectory Generation for Flexible-Joint Space Manipulators

ReachBot: A Small Robot for Large Mobile Manipulation Tasks

A review of the end-effector of large space manipulator with capabilities of misalignment tolerance and soft capture

An autonomous mobile manipulator for assembly tasks

A novel manipulator's trajectory planning for free-flying space robot

Payload‐centric autonomy for in‐space robotic assembly of modular space structures

Multirobot Assembly Sequence Planning of a Large Space Telescope

On the analysis of active reflector supporting manipulator for the large spherical radio telescope

Vision-driven Compliant Manipulation for Reliable, High-Precision Assembly Tasks

Development of a Dexterous Continuum Manipulator for Exploration and Inspection in Confined Spaces.