The Analysis and Application of Parallel Manipulator for Active Reflector of FAST
Xiao-qiang Tang,Peng Huang
DOI: https://doi.org/10.5772/5437
2008-01-01
Abstract:The Analysis and Application of Parallel Manipulator for Active Reflector of FAST 323 manipulator for reflector unit.Since 3-PRS mechanism has many problems such as parasitic motion, advanced research on kinematics with errors is necessary.Then three-dimensional fitting accuracy is analyzed based on error kinematics of 3-PRS mechanism. The analysis of 3-PSS+C supporting mechanism Supporting mechanism descriptionAs shown in Fig. 2(a), the parallel supporting mechanism consists of a base plate, a movable platform, and four connecting legs, three of which have identical kinematic chains, PSS.Each of the three legs is composed of one fixed length link (3), and one union driven plate (5).The fixed length link (3) is connected to the movable platform (1) and the union driven plate (5) by two spherical joints ( 2) and ( 4), respectively.The union driven plate ( 5) is connected to the base plate (7) by a prismatic joint (6).The base plate and the movable platform are two regular triangles.The passive leg (8) connects the center points of the two regular triangles.One end of the passive leg has a 2-DOF universal joint (9), another end is fixed to the base plate (7) by a prismatic joint (10).The passive leg (8) can be extensible with the prismatic joint (10) along its axis line.Furthermore, when the supporting mechanism is assembled, the axis line of the prismatic joint (10) should pass the center of the spherical reflector.Since a supporting mechanism should be driven by three actuator legs, as shown in Fig. 2, the union driven plate (5) connects three fixed length links in order to reduce the actuator number.As a result, the number of actuators of the active reflector is equal to that of the reflector units.From above description, one can see that the proposed mechanism is such a mechanism with n DOFs, which usually consists of n identical actuated legs with 6 DOFs and one passive leg with n DOFs connecting the movable platform and the base plate, i.e., the DOF of the mechanism is dependent on the passive leg's DOF.For the mechanism considered in this paper, the passive leg is with three DOFs, which means that n equals to 3. The three DOFs are one translation along z axis and two rotations about x and y axes.