Abstract:It is vital to explore sustainable and highly efficient catalysts for the oxygen reduction reaction (ORR) with increasing energy demand. Herein, a cobalt (Co) atom dispersed on an N-doped carbon nanosphere catalyst (denoted as ) was designed and constructed by a simple precursor-engineering method. The regulation of heteroatoms and Co metal atoms in precursors introduces more defects and thus reduces the degree of graphitization in the catalyst. The high N content of 5.23 at% in the catalyst provides abundant N sites to anchor metallic Co atoms, which further increases the defects for enhanced catalytic activity. The obtained with an ultralow loading of Co (only 0.041 wt %) exhibits an onset potential of 1.05 V, a limited-diffusion current density of 4.74 mA/cm<sup>2</sup>, and a half-wave potential of 0.79 V for the ORR under alkaline conditions, comparable to those of commercial Pt/C (1.06 V, 4.58 mA/cm<sup>2</sup>, and 0.81 V, respectively). Therefore, the synergistic effect of heteroatoms and Co metal atoms is beneficial for tuning the carbon matrix defects, which leads to the improvement of ORR activity. The Koutecky–Levich equation and rotating ring-disk electrode tests reveal a complete four-electron oxygen reduction pathway, impeding hydrogen peroxide generation. Moreover, nearly 93.8% of the current is retained for after 10 h stability testing without any morphological structural collapse. Meanwhile, it demonstrates superior tolerance to methanol. Our discovery opens a door to engineering the defects of carbon catalysts through introducing ultralow loading of non-noble metal atoms on substrates.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c03197?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c03197</a>.**Polarization curves of catalysts for temperature regulation; TEM and HAADF-STEM graphs; TGA curves of catalysts; XRD and Raman analysis of ECo-900; XPS C1s spectra of catalysts; additional cyclic voltammogram and LSV data; stability testing data; methanol resistance testing data; K–L plots and electron number; cycling performance of Zn-air equipped battery data; and element analysis results (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c03197/suppl_file/ae0c03197_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Defect and Doping Co-Engineered Non-Metal Nanocarbon ORR Electrocatalyst

Zn-induced Defect Engineering to Activate Bimetallic NiCo Alloy@nitrogen-Doped Graphene Hybrid Nanomaterials for Enhanced Oxygen Reduction Reaction

Nanocarbon for Oxygen Reduction Electrocatalysis: Dopants, Edges, and Defects

Towards high-efficiency nanoelectrocatalysts for oxygen reduction through engineering advanced carbon nanomaterials.

Enhancing Defects of N-Doped Carbon Nanospheres Via Ultralow Co Atom Loading Engineering for a High-Efficiency Oxygen Reduction Reaction

N, P-dual doped carbon with trace Co and rich edge sites as highly efficient electrocatalyst for oxygen reduction reaction

Coordination Engineering of Defective Cobalt-Nitrogen-Carbon Electrocatalysts with Graphene Quantum Dots for Boosting Oxygen Reduction Reaction

Three-Dimensional Heteroatom-Doped Nanocarbon For Metal-Free Oxygen Reduction Electrocatalysis: A Review

Carbon-based metal-free oxygen reduction reaction electrocatalysts: past, present and future

Transition Metal and Nitrogen Co‐Doped Carbon‐based Electrocatalysts for the Oxygen Reduction Reaction: From Active Site Insights to the Rational Design of Precursors and Structures

Recent Advances and Synergistic Effects of Non-Precious Carbon-Based Nanomaterials as ORR Electrocatalysts: A Review

Ultrathin two-dimensional phosphorus and nitrogen Co-doped carbon nanosheet as efficient oxygen reduction electrocatalyst

Non‐N‐Doped Carbons As Metal‐Free Electrocatalysts

Defect-rich and metal-free N, S co-doped 3D interconnected mesoporous carbon material as an advanced electrocatalyst towards oxygen reduction reaction

Porous Fe, Co, and N-co-doped Carbon Nanofibers As High-Efficiency Oxygen Reduction Catalysts

Achieving efficient oxygen reduction on ultra-low metal-loaded electrocatalysts by constructing well-dispersed bimetallic sites and interconnected porous channels

Nanocarbon Electrocatalysts for Oxygen Reduction in Alkaline Media for Advanced Energy Conversion and Storage

Highly dispersed Zn-N, S co-doped carbon for highly efficient electrocatalytic oxygen reduction

Carbon Dots Hybrid Porous Carbon Nanofibers as Efficient Electrocatalysts for Oxygen Reduction Reaction

Defective nanomaterials for electrocatalysis oxygen reduction reaction

Defect-Engineered Mesoporous Undoped Carbon Nanoribbons Outperform the Pt/C Benchmark for Oxygen Reduction