Abstract:The development of comprehension in the mechanism of lithium–sulfur (Li–S) batteries creates more opportunities and potential for the application of interlayer. However, the viable design of versatile interlayer to retard the shuttling effects and improve the sluggish kinetics is still a focus and paramount challenge. Herein, we present a tentacles-like metallic nickel-modified and nitrogen-doped carbon skeleton (NCS) to serve as adsorbent and catalyst in the lithium–sulfur battery (LSBs). The carbonized skeleton and derived carbon tubes jointly construct conductive networks and adequate ion pathways. Meanwhile, abundant metallic nickel nanoparticles synergistically build a multifunctional interface with polar networks for the fixation and conversion of polysulfides, giving rise to significant improvement of cyclic stability and reaction kinetics of LSBs. As a result, the Li–S batteries using NCS as an interlayer could possess superior electrochemical performance including cyclic stability, high specific capacity (1204.8 mAh g–1 at 0.2C, 998.7 mAh g–1 at 1C), and good Coulombic efficiency. More importantly, even with the areal sulfur loading of up to 6.1 and 7.5 mg cm–2, it still demonstrates superior electrochemical performance with the areal capacity of 4.2 and 5.9 mAh cm–2 with steady cycling, respectively. In conclusion, we confirm this work provides a promising way to explore and expand the application of metal nanoparticles in interlayers for advanced Li–S batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01600?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01600</a>.SEM patterns of different magnification; TEM of the CS interlayer; IFFT of graphitic carbon of the NCS interlayer; galvanostatic discharge and charge profile; XRD results of the NCS interlayers after cycling; and curve plotting of the energy density of Li–S coin cells (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01600/suppl_file/am1c01600_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effect of Charging Protocol on the Performance of LiNi0.6Co0.2Mn0.2O2 Lithium Slurry Batteries

Current collectors’ effects on the electrochemical performance of LiNi0·6Co0·2Mn0·2O2 suspension electrodes for lithium slurry battery

Integrated Interface Configuration by In-Situ Interface Chemistry Enabling Uniform Lithium Deposition in All-Solid-state Lithium Metal Batteries

Promoted Rate and Cycling Capability of Li–S Batteries Enabled by Targeted Selection of Co-Solvent for the Electrolyte

Dimensional effects on the electronic conductivity and rheological behaviors of LiFePO4 catholytes for rechargeable lithium slurry flow battery

Elucidating and Minimizing the Space‐Charge Layer Effect between NCM Cathode and Li6PS5Cl for Sulfide‐Based Solid‐State Lithium Batteries

Minimizing Undesired Side Reactions Induced by Nanoscale Conductive Carbon Enables Stable Cycling of Semi‐Solid Li‐Ion Full Batteries

Unraveling the energy storage mechanism of biphase TiO 2 (B)/TiO 2 (A) slurry and its application in lithium slurry battery

Toward the Practical and Scalable Fabrication of Sulfide‐Based All‐Solid‐State Batteries: Exploration of Slurry Process and Performance Enhancement Via the Addition of LiClO4

Robust Multiscale Electron/Ion Transport and Enhanced Structural Stability in SiOx Semi-Solid Anolytes Enabled by Trifunctional Artificial Interfaces for High-Performance Li-Ion Slurry Flow Batteries

Investigation on Li-plating Prevention Optimal Charging Protocol of Nickel-Rich/graphite-siox Lithium Ion Battery

Optimization on transport of charge carriers in cathode of sulfide electrolyte-based solid-state lithium-sulfur batteries

An Integrated Strategy Towards Enhanced Performance of the Lithium-Sulfur Battery and Its Fading Mechanism.

Investigation on Li-plating prevention optimal charging protocol of nickel-rich/graphite-SiO x lithium ion battery

Rheological Studies of LiNi0.6Mn0.2Co0.2O2-Based Slurry for the Development of Energy Dense Li-Ion Applications

A mixed electron/ion conducting interlayer enabling ultra-stable cycle performance for solid state lithium sulfur batteries

Understanding slurry mixing effects on the fast charging capability of lithium-ion battery cells: Methodology and case study

Revealing the Influence of Electron Migration Inside Polymer Electrolyte on Li+ Transport and Interphase Reconfiguration for Li Metal Batteries

Highly Effective Trapping-Conversion Interface Based on Nickel-Modified Versatile Carbon Skeleton Enabled High-Performance Li–S Battery

Mitigating the Interfacial Degradation in Cathodes for High Performance Oxide-Based Solid-State Lithium Batteries.

Dual N-modification enables high-performance Solid-State Li metal batteries with Li5.5PS4.5Cl1.5