Abstract:While adding superabsorbent polymer hydrogel particles to fresh concrete admixtures, they act as internal curing agents that absorb and then release large amounts of water and reduce self-desiccation and volumetric shrinkage of cement that finally result in hardened concrete with increased durability and strength. The entrainment of microscopic air bubbles in the concrete paste can substantially improve the resistance of concrete. When the volume and distribution of entrained air are adequately managed, the microstructure is protected from the pressure produced by freezing water. This study addresses the design and application of hydrogel nanoparticles as internal curing agents in concrete, as well as new findings on crucial hydrogel-ion interactions. When mixed into concrete, hydrogel particles produce their stored water to power the curing reaction, resulting in less volumetric shrinkage and cracking and thereby prolonging the service life of concrete. The mechanical and swelling performance qualities of the hydrogel are very sensitive to multivalent cations found naturally in concrete mixes, such as aluminum and calcium. The interactions between hydrogel nanoparticles and alkaline cementitious mixes are described in this study, while emphasizing how the chemical structure and shape of the hydrogel particles regulate swelling behavior and internal curing efficiency to eliminate voids in the admixture. Moreover, in this study, an artificial neural network (ANN) was utilized to precisely and quickly analyze the test results of the compressive strength and durability of concrete. The addition of multivalent cations reduced swelling capacity and changed swelling kinetics, resulting in fast deswelling behavior and the creation of a mechanically stiff shell in certain hydrogel compositions. Notably, when hydrogel particles were added to a mixture, they reduced shrinkage while encouraged the creation of particular inorganic phases within the void area formerly held by the swelled particle.

Alkali Tolerance of Concrete Internal Curing Agent Based on Sodium Carboxymethyl Starch

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

The Effect of Different Types of Internal Curing Liquid on the Properties of Alkali-Activated Slag (AAS) Mortar

Polyacrylamide Hydrogel Containing Starch and Sugarcane Bagasse Ash: Synthesis, Characterisation, and Application in Cement Pastes and Mortars

Mitigating Autogenous Shrinkage of Alkali-Activated Slag Mortar by Using Porous Fine Aggregates as Internal Curing Agents

A Method for Internal Curing Water Calculation of Concrete with Super Absorbent Polymer

Experimental Study of a Superabsorbent Polymer Hydrogel in an Alkali Environment and Its Effects on the Mechanical and Shrinkage Properties of Cement Mortars

Texture analysis of the microstructure of concrete with different concentrations of superabsorbent polymer after internal curing

Effect of Superabsorbent Polymer (SAP) Internal Curing Agent on Carbonation Resistance and Hydration Performance of Cement Concrete

Potential usage of porous autoclaved aerated concrete waste as eco-friendly internal curing agent for shrinkage compensation

Alkali activated cement mixture at ambient curing: Strength, workability, and setting time

Effects of citric acid on the rheology, hydration and strength development of alkali aluminosilicate cement

Internal curing with superabsorbent polymer modified by nano SiO 2 : Shrinkage mitigation and microstructure refinement

Robust evaluation of superabsorbent polymers as an internal curing agent in cementitious composites

Internal carbonation curing base on molecular sieve: Influence and mechanism on cement-based materials

A new superabsorbent based on the poly(itaconic acid)/poly(sodium allyl sulfonate) polymer network for application in concrete as an internal curing agent

Enhancing the internal curing process of self-compacting concrete containing lightweight aggregate and chemical additives

Self-healing properties of mortar with crystalline admixture: experimental investigation and parameter optimization

Application of Polyacrylic Hydrogel in Durability and Reduction of Environmental Impacts of Concrete through ANN

Strength formation mechanism and curing system optimization of low-carbon cementitious materials prepared by synergistic activation of multiple alkaline solid wastes

Internal Curing of Concrete by Superabsorbent Polymer Particles