Energy and Exergy Analysis of a Rectangular-Shaped Mini-Channel Flat-Plate Solar Collector Using Tio2-Water and Cu-Water Nanofluids

Abhay Kumar Singh, Suresh Kant Verma
DOI: https://doi.org/10.52783/tjjpt.v44.i2.596
2023-07-24
Abstract:Flat plate solar collectors (FPSC) are commonly used for a variety of applications and have a very simple design. However, the main drawbacks of the collector are its low outlet temperature and poor thermal performance. In present study, the fluid outlet temperature, heat removal factor, energy efficiency, exergy efficiency, and pressure drop have been evaluated for a rectangular-shaped minichannel FPSC operating with two different nanofluids (Cu-water and TiO2-water). The ranges of volumetric concentration ratio and mass flow rate are 1-5% and 0.01-0.07kg/s, respectively. A mathematical model based on the energy balance has been solved using energy equation solver software. The result revealed that fluid outlet temperature, mean plate temperature, and overall heat loss coefficient (HLC) increase with increasing concentration ratios for both nanofluids. But at the same concentration ratio and MFR, the fluid outlet temperature, mean plate temperature, and overall HLC for Cu-water nanofluid are greater than those of TiO2-water. The outlet temperature and mean plate temperature for the nanofluid TiO2-water of volumetric ratio 1% are 369.4K and 347.9 K, respectively, and these values increase to 395.9K and 351.1K at volumetric ratio 5% for the same MFR of 0.01 kg/s. Efficiency and heat removal factor for the TiO2-water nanofluid are greater than those for the Cu-water nanofluid for the same MFR and concentration ratio. Pressure drop increases with increasing concentration ratios for both fluids, but it is greater for Cu-water as compared to TiO2-water.
What problem does this paper attempt to address?