Abstract:Groundwater remediation technologies, such as pump-and-treat (PTS) and funnel-and-gate systems (FGS), aim at reducing locally appearing contaminations. Therefore, these methodologies are basically evaluated with respect to their capability to yield local improvements of an environmental situation, commonly neglecting that their application is also associated with secondary impacts. Life cycle assessment (LCA) represents a widely accepted method of assessing the environmental aspects and potential impacts related to a product, process or service. This study presents the set-up of a LCA framework in order to compare the secondary impacts caused by two conceptually different technologies at the site of a former manufactured gas plant in the city of Karlsruhe, Germany. As a FGS is already operating at this site, a hypothetical PTS of the same functionality is adopted. During the LCA, the remediation systems are evaluated by focusing on the main technical elements and their significance with respect to resource depletion and potential adverse effects on ecological quality, as well as on human health. Seven impact categories are distinguished to address a broad spectrum of possible environmental loads. A main point of discussion is the reliability of technical assumptions and performance predictions for the future. It is obvious that a high uncertainty exists when estimating impact specific indicator values over operation times of decades. An uncertainty analysis is conducted to include the imprecision of the underlying emission and consumption data and a scenario analysis is utilised to contrast various possible technological variants. Though the results of the study are highly site-specific, a generalised relative evaluation of potential impacts and their main sources is the principle objective rather than a discussion of the calculated absolute impacts. A crucial finding that can be applied to any other site is the central role of steel, which particularly derogates the valuation of FGS due to the associated emissions that are harmful to human health. In view of that, environmental credits can be achieved by selecting a mineral-based wall instead of sheet piles for the funnel construction and by minimising the steel consumption for the gate construction. Granular activated carbon (GAC) is exclusively considered as the treatment material, both in-situ and on-site. Here it is identified as an additional main determinant of the relative assessment of the technologies since it is continuously consumed.

The Impact of a Permeation Grouting Technique Quantitatively Assessed Through a Process-Focused Life Cycle Assessment

Sedimentation-affected Engineering Performances and Microstructures of a Hybrid Portland- Sulfate Aluminate Cement Grout Cast in Long Tubes

Sand and silt treatment with novel binders

Mechanics of the Penetration and Filtration of Cement-Based Grout in Porous Media: New Insights from CFD–DEM Simulations

Implementing Digital Imaging for Improved Understanding of Microfine Cement Grout Permeation and Filtration

Evaluation of life cycle assessment (LCA) use in geotechnical engineering

Evaluating rock mass groutability at shallow depths: a novel approach based on geo-structural surveys and permeability tests

Effects of Mix Design and Functional Unit on Life Cycle Assessment of Recycled Aggregate Concrete: Evidence from Co2 Concrete

An environmental evaluation: A comparison between geopolymer and OPC concrete paving blocks manufacturing process in italy

Life Cycle Assessment (LCA) in Earth Construction: A Systematic Literature Review Considering Five Construction Techniques

State of the art in European grouting

Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber

A critical review of 100 years of permeability tests for the sustainability of concrete structures

Life cycle assessment of active and passive groundwater remediation technologies

The Environmental Impact Evaluation on the Application of Permeable Pavement Based on Life Cycle Analysis

Environmental and economic impacts of combining backfill materials for novel circular narrow trenches

Understanding the Effect of Cementitious Grouting Pressure on Micro-Fracture Permeability for Rock Reinforcement Underground: A Lab Study

Nanosilica Grout Permeation in Sand: Experimental Investigation and Modeling

Tail void grouting material: A parametric study on the role of hydro-mechanical characteristics in mechanized tunneling

Field Experimental Research for Comprehensive Evaluation of the Inspection of High-pressure Anti-seepage Grouting Effect of the Tunnel