Abstract:The porous carbon blacks rationally designed by a facile yet efficient NH3 thermal etching route have been investigated as anode materials in an ether-based electrolyte for sodium-ion batteries. The as-synthesized CBN35 carbon black with a 35% weight loss after NH3 thermal etching exhibited a large specific charge capacity of 352 mAh g−1 at 50 mA g−1 and a superior rate capability of 101 mAh g−1 at 16000 mA g−1, due to its highest microporosity, an appropriate surface area, a desirable microstructure, and a promising hybrid intercalation mechanism. Impressively, even cycled at 1600 mA g−1 over 3200 cycles, an outstanding reversible capacity of 103 mAh g−1 with a negligible 0.0162% capacity loss per cycle can still be achieved. Based on the multimodal characterizations including the structural probes of phase evolution for carbon materials, the electrochemical techniques, and the surface-sensitive XAS measurements, the exceptional electrochemical properties should stem from several merits of modified carbon black system. While the particular microporous structure provides relatively more accessible sodium storage sites, a novel hybrid intercalation mechanism in ether-based electrolyte would incorporate the sodium ion insertion into the disordered structure with the solvated sodium ion species co-intercalation into the graphitic phase. In addition to the diffusion-controlled redox reactions, the noticeable surface-induced pseudocapacitive reactions also significantly contribute to the charge storage upon sodiation and guarantee the rapid migrations of sodium ions/solvated compounds. This system further features a controlled emergence of a robust but thin solid electrolyte interphase layer, which could suppress the side reactions of active electrode with reactive electrolyte, maintain the fragile porous structure upon cycling, and facilitate the migrations of sodium ions and solvated sodium ion compounds.

Enhancing Sodium-Ion Energy Storage of Commercial Activated Carbon by Constructing Closed Pores via Ball Milling

Revitalizing Sodium-Ion Batteries Via Controllable Microstructures and Advanced Electrolytes for Hard Carbon

Mechanochemistry Transforming High-Surface-Area Coal-based Activated Carbon into Densified Carbon with Optimized Multi-scale Structures for Enhanced Sodium/Potassium Ion Storage

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

Microcrystalline Engineering of Anthracite‐Based Carbon Via Salt‐Assisted Ball Milling for Enhanced Sodium Storage Performance

High-Energy Ball Milling Promoted Sulfur Immobilization for Constructing High-Performance Na-Storage Carbon Anodes

Milling Time-Dependent Lithium/Sodium Storage Performance of Carbons Synthesized by a Mechanochemical Reaction

Regulation of Surface Oxygen Functional Groups and Pore Structure of Bamboo-Derived Hard Carbon for Enhanced Sodium Storage Performance

Sustainable Preparation of Nanoporous Carbons via Dry Ball Milling: Electrochemical Studies Using Nanocarbon Composite Electrodes and a Deep Eutectic Solvent as Electrolyte

Ball milling-assisted synthesis and electrochemical performance of porous carbon with controlled morphology and graphitization degree for supercapacitors

Altering Thermal Transformation Pathway to Create Closed Pores in Coal‐Derived Hard Carbon and Boosting of Na+ Plateau Storage for High‐Performance Sodium‐Ion Battery and Sodium‐Ion Capacitor

Regulating the Pore Structure of Biomass-Derived Hard Carbon for an Advanced Sodium-Ion Battery

Structural design of biomass-derived hard carbon anode materials for superior sodium storage via increasing crystalline cellulose and closing the open pores

Pore structure manipulation‐enhanced sodium storage of calcium‐lignosulfonate‐based hard carbon

Nitrogen-doped Carbon with Modulated Surface Chemistry and Porous Structure by a Stepwise Biomass Activation Process towards Enhanced Electrochemical Lithium-Ion Storage

Sodium Storage Mechanism of Nongraphitic Carbons: A General Model and the Function of Accessible Closed Pores

Microstructure Reconstruction via Confined Carbonization Achieves Highly Available Sodium Ion Diffusion Channels in Hard Carbon

Cell‐Shearing Chemistry Directed Closed‐Pore Regeneration in Biomass‐Derived Hard Carbons for Ultrafast Sodium Storage

Ball-Milling-Triggered Synthesis of Si/C/SiC@MCMB Composites from Carbon Dioxide for Improved Lithium Storage Capability

Microstructure modulation of hard carbon derived from long-flame coal to improve electrochemical sodium storage performances

Engineering porous carbon with precise dimensions to promote surface‐dominated storage in sodium‐ion batteries