Abstract:Hard carbon (HC) displays great potential for high-performance sodium-ion batteries (SIBs) due to its cost-effective, simple fabrication and most likely to be commercialized. However, the complicated microstructures of HC lead to difficulties in deeply understanding the structure-performance correlation. Particularly, evaluation of influence of pore structure on Na storage performances is still causing disputes and rational strategies of designing pore architecture of HC are still necessary. In this work, the skillful and controllable phase-inversion method is applied to construct porous HC with abundantly interconnected and permeable tunnel-like pores, which can promote ionic diffusion and improve electrode–electrolyte interfacial affinity. Structure-performance investigation reveals that porous HC with cross-coupled macropore architecture can boost Na storage performances comprehensively. Compared to pristine HC with negligible pores, well-regulated porous HC anodes show an obvious enhancement on initial Coulombic efficiency (ICE) of 68.3% (only 51.5% for pristine HC), reversible capacity of 332.7 mAh g–1 at 0.05 A g–1, rate performance with 67.4% capacity retention at 2 A g–1 (46.5% for pristine HC), and cycling stability with 95% capacity maintained for 90 cycles (86.4% for pristine HC). Additionally, the ICE can be optimized up to 76% by using sodium carboxymethyl cellulose as a binder. This work provides an important view of optimizing Na storage performances of HC anodes by pore engineering, which can be broadened into other electrode materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14738.Additional SEM, EDS, and electrochemical performances including EIS, galvanostatic discharge/charge profiles, and rate performances (Figure S1–S5) and summarization of some porous carbon anodes for SIBs, microstructure and composition information of HCs, and comparing the ICE, rate performance, and cycling stability of various HC anodes with different electrolytes and binders (Tables S1–S3) (PDF)This article has not yet been cited by other publications.

Pore structure manipulation‐enhanced sodium storage of calcium‐lignosulfonate‐based hard carbon

Revitalizing Sodium-Ion Batteries Via Controllable Microstructures and Advanced Electrolytes for Hard Carbon

The Induced Formation and Regulation of Closed-Pore Structure for Biomass Hard Carbon As Anode in Sodium-Ion Batteries

Pore structure and oxygen content design of amorphous carbon toward a durable anode for potassium/sodium‐ion batteries

Chemical crosslinking regulating microstructure of lignin‐derived hard carbon for high‐performance sodium storage

Demineralization activating highly-disordered lignite-derived hard carbon for fast sodium storage

Regulating the microstructure of cross-linked starch-derived hard carbon for highly reversible sodium-ion storage

Microstructure Reconstruction via Confined Carbonization Achieves Highly Available Sodium Ion Diffusion Channels in Hard Carbon

Boosting Sodium Storage Performance of Hard Carbon Anodes by Pore Architecture Engineering

Enhanced sodium and potassium ions storage of soft carbon by a S/O co-doped strategy

Hard carbon with an opened pore structure for enhanced sodium storage performance

From Micropores to Ultra-micropores inside Hard Carbon: Toward Enhanced Capacity in Room-/Low-Temperature Sodium-Ion Storage

Ultrahigh Plateau‐Capacity Sodium Storage by Plugging Open Pores

Regulating Pseudo‐Graphitic Domain and Closed Pores to Facilitate Plateau Sodium Storage Capacity and Kinetics for Hard Carbon

Industrial‐scale Hard Carbon Designed to Regulate Electrochemical Polarization for Fast Sodium Storage

Gelatin‐Derived Hard Carbon Achieves Effective Control of Microstructure toward Fast and Durable Sodium Storage

Sulfuric acid treatment to control the microcrystalline structure of starch-based hard carbon for sodium storage

An Overall Understanding of Sodium Storage Behaviors in Hard Carbons by an "Adsorption‐Intercalation/Filling" Hybrid Mechanism

Rationally Designing Closed Pore Structure by Carbon Dots to Evoke Sodium Storage Sites of Hard Carbon in Low‐Potential Region

Structural design of biomass-derived hard carbon anode materials for superior sodium storage via increasing crystalline cellulose and closing the open pores

Tremella-like Porous Carbon Derived from One-Step Electroreduction of Molten Carbonates with Superior Rate Capability for Sodium-Ion Batteries