Abstract:With the popularity of multirotor aircraft, the aerodynamic noise it generates has an increasingly serious impact on the environment. A fast method for globally predicting the tonal noise is proposed in this study. The goal of this method is to predict the global aerodynamic noise at a small computational cost, then providing a fast model for online noise prediction and control. Firstly, the global noise model of a single rotor in acoustic modal domain is established by using the near-field acoustic holography method. Then, the global noise model of a rotor with different configurations is obtained by using the mapping relationship of acoustic modal coefficients. Subsequently, the global noise of multirotor is predicted based on the configuration information of rotors by using the wave superposition principle. To validate the performance of this method, the predicted global noises of single rotor and multi rotors were compared with other numerical methods. It is revealed that the acoustic modal analysis can accurately predict global noise at a small computational cost. Moreover, a parametric study was conducted to evaluate the effect of different configurations on the global noise. The mechanism of phase synchronization method was analyzed comprehensively at the same time. Lastly, experiments were carried out in the anechoic chamber to validate the method proposed. When the separation distance between rotor shafts is greater than 2.8 R, the aerodynamic interference between the rotors can be ignored and the method can be well applied globally. Otherwise, the aerodynamic interference result in predictions that do not match the experiments at higher elevation angles, e.g. 60°. Meanwhile, as the elevation angle decreases, the prediction error decreases rapidly.

Study of drone self-noise estimation for low frequency noise measurement by multicopter drone

Experimental Study to Quantify the Rotor-to-Rotor Interaction Characteristics of a Small Unmanned-Aerial-Vehicle

DOA Estimation Using Amateur Drones Harmonic Acoustic Signals

An Investigation of Multi-rotor Drone Noise Based on the Acoustic Hemisphere in an Actual Environment

On identifying the deterministic components of propeller noise

Noise measurement of a quadrotor drone in an anechoic chamber

A Performance Assessment on Rotor Noise-Informed Active Multidrone Sound Source Tracking Methods

Integrated Evaluation of the Aeroacoustics and Psychoacoustics of a Single Propeller

Performance evaluation of sound source localisation and tracking methods using multiple drones

Noise attenuation of quadrotor using phase synchronization method

Evaluation of the helicoidal surface theory for the noise prediction of small UAS propellers

An Investigation of the Noise Characteristics of a Small-Scale Rotor in Axial Descent

Noise attenuation of frequency-modulated multi-rotor using sound field reproduction

Fast prediction method for multirotor global tonal noise based on acoustic modal analysis

Identification and Reduction of Interactional Noise of a Quadcopter in Hover and Forward Flight Conditions

Experimental study on noise reduction of multi-rotor by phase synchronization

Aeroacoustic and aerodynamic measurements at the rotor plane in the interaction of a small rotor with wings

Experimental investigations on aerodynamic and psychoacoustic characteristics of three-blade looprop propeller

Experimental Assessment of the Flow Recirculation Effect on the Noise Measurement of a Free-Flying Multi-rotor UAS in a Closed Anechoic Chamber

Downwash Reduction Drone With Adaptive Rotors and Its 3D Aerodynamic Analysis and Stabilization Control

Abnormal drone noise detection system based on the microphone array and self-supervised learning