Abstract:The rapid development of highway traffic has gradually deteriorated the acoustic environment along the line. Sonic crystal theory provides new ideas for traffic acoustic barrier. However, the lack of practical numerical models and field test verifications has restricted the promotion and application of sonic crystal acoustic barriers (SCABs). In this study, a field test was conducted to study the noise reduction performance of SCAB. The SCAB exhibits excellent wave attenuation in the band gap, when compared with concrete acoustic barriers (CABs) along highways, the noise reduction performance in the band gap is improved by 0.5-2.1 dB(A), especially at the local peak in the highway noise spectrum. However, from the perspective of total insertion loss, CAB performs better than SCAB in all distances in the protected area. Next, the 3D FEM model is established based on the highway site and validated by the measured results. Compared with the commonly used 2D model, the 3D FEM model is more practical for considering the top diffraction and ground reflection, which influence the noise reduction performance a lot and need to be considered. To improve the noise reduction performance of SCAB, three types of optimization measures are explored. The gradient combination of scatterers can effectively improve the noise reduction effect in the low-frequency band gap, especially the high- to low-gradient layout. Besides, not only the porous sound-absorbing material but also the microperforated plates can improve the noise reduction effect, especially outside the band gap. The larger perforation rates and smaller apertures of microperforated plate are preferred in SCAB. This work provides field test support and promotes the application of SCABs in traffic noise control.

Effect of large bus body reflection on sound barrier efficiency for road traffic noise control: a simulation study

Attenuation Effect of City Green Belt and Simulation on Traffic Noise

[Optimally Control Urban Railway Noise by Sound Propagation Path].

Comparative Study of Noise Reduction Effects of Different Sound Absorption Barriers

Design of Embedded Sound-barrier of Urban Rail Transit and Simulated Research on Its Acoustic Performance

Sound field study of a building near a roadway via the boundary element method

Analysis on Noise Reduction Effect and Investment Benefits of Different Rail Transit Sound Barriers

Modeling, analysis, and validation of an active T-shaped noise barrier

Prediction and Analysis of Noise Impact and Noise Reduction Scheme Effect for Complex Road Types

Numerical modeling and field test of sonic crystal acoustic barriers

Study on Barrier Properties with Different Top Shapes by Using Boundary Element Method

Vibration and noise damping technique for large bus body

Adjusted Controlled Pass-By (CPB) Method for Urban Road Traffic Noise Assessment

THE STUDY ON NOISE BARRIER BUILT BETWEEN TWO PATHS TO CONTROL THE RAILWAY TRAFFIC NOISE

Prediction of Noise Reduction Effect of Sound Barriers and Evaluation of Noise Annoyance

Validation of Noise Barrier Insertion Loss Simulation in Reducing Road Traffic Noise by Site Measurement Data

NUMERICAL MODELLING OF THE SOUND FIELDS IN URBAN STREETS WITH DIFFUSELY REFLECTING BOUNDARIES

Research and application of combined noise reduction method by using noise reducing pavement and noise barrier

Analysis of the effect of combined noise reduction measures of trapezoidal sleeper and sound barrier on elevated line

Noise Reduction for Sound Barrier in Rail Traffic

Simulation and Analysis of Road Traffic Noise among Urban Buildings Using Spatial Subdivision-Based Beam Tracing Method