Abstract:Pipeline inspection gauge (PIG) is often blocked in the ageing pipelines of stacked objects. A novel pneumatically controlled sealing disc has been designed to address the issue of PIG's blockage. Compared to traditional passive-controlled sealing discs, the new sealing disc incorporates a multi-jointed pneumatic webbed foot that enables active control. It provides both single execution mode and multiple execution mode capabilities, allowing it to achieve partial bending through the inflation of a single foot and thereby enhancing sealing performance during active control. A finite element method (FEM) was introduced and effectively validated by comparing simulation results with experimental results of the inflatable bending experiments of a single foot. Then the performance of the sealing disc with single execution mode and multiple execution mode was compared using the FEM, and the results show that they have good consistency. Next, the effects of four kinds of materials and five structural parameters on the performance of the sealing disc were studied using the FEM. The results show that the multi-material structure has better performance compared to the same materials and the Ecoflex series demonstrates greater responsiveness in inflation experiments. As the air pressure grows, the position parameter of the joint has little effect on the bending angle as well as the expansion ratio, and the bottom disc thickness has also slightly influence on the expansion ratio. Meanwhile, the thicker the webbed foot thickness, the smaller the slope angle and the thinner, the larger the bending angle; the smaller the slope angle, the thicker the webbed foot thickness, the larger the expansion ratio. The conclusions obtained in this paper are beneficial for the design and optimization of PIG sealing discs for actively controlling. The research results provide theoretical reference for the study of intelligent and efficient pipeline pigging technology.

Investigation on mechanical behaviour of underwater launching process of bidirectional pigging robot in the subsea oil pipeline using Coupled Eulerian-Lagrangian method

Lifting of Horizontal Subsea Pipeline with Diverse Lifting Points in Waves: Hydrodynamic Analysis

Locating, Trajectory Planning and Control of an Underwater Propeller Cleaning Manipulator

Numerical Simulation on Dynamic Behaviour of Deepwater J-lay Systems

An Underwater Robot with Self-Adaption Mechanism for Cleaning Steel Pipes with Variable Diameters

Influences of Pipelay Parameters on Dynamic Behavior of Deepwater J-Lay System

Parametric study on the mechanical behavior of submarine pipeline for deepwater S-lay operation

Analysis and structure optimization of jetting pigging robot for black powder removal process in subsea nature gas pipeline

Drag force of submarine landslides mudflow impacting on a suspended pipeline

Motion Law and Mechanical Properties of PIGs When Passing through a Pipe Bend

Multi-jointed pneumatic sealing disc of fluid-driven pipeline robot: impacts of structural parameters on performance

PIV Experimental Research and Numerical Simulation of the Pigging Process

Vortex-induced Vibration of a Piggyback Pipeline Half Buried in the Seabed

Experimental research on the contact force of the bi-directional pig in oil and gas pipeline

Dynamic performance of a long curved river-crossing pipeline system with multiple floating bodies during immersion process

Research on the Dynamic Response of a Steel Catenary Riser in the Touchdown Zone under Pigging Conditions

Experimental Studies on Vortex-Induced Vibration of a Piggyback Pipeline

Numerical Simulation of the Launching of Underwater Vehicle

Research on the Influence of Underwater Environment on the Dynamic Performance of the Mechanical Leg of a Deep-sea Crawling and Swimming Robot

Dynamic Modeling and Simulation of Underwater Parallel Robot.

Stability analysis of braking and control system of pipeline intelligent plugging robot