Abstract:Present divertor concepts for next step experiments such ITER and TPX rely upon impurity and hydrogen radiation to transfer the energy from the edge plasma to the main chamber and divertor chamber walls. The efficiency of these processes depends strongly on the heat flux, the impurity species, and the connection length. Using a database for impurity radiation rates constructed from the ADPAK code package, we have developed criteria for the required impurity fraction, impurity species, connection length and electron temperature and density at the mid-plane. Consistent with previous work, we find that the impurity radiation from coronal equilibrium rates is, in general, not adequate to exhaust the highest expected heating powers in present and future experiments. As suggested by others, we examine the effects of enhancing the radiation rates with charge exchange recombination and impurity recycling, and develop criteria for the minimum neutral fraction and impurity recycling rate that is required to exhaust a specified power. We also use this criteria to find the optimum impurity for divertor power exhaust.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to effectively dissipate the heat in the edge plasma of the Tokamak device through impurity radiation, so as to ensure that the plasma can "detach", that is, release most of the thermal energy through radiation before reaching the divertor plate. Specifically, the research aims to determine the optimal conditions for the following parameters: - **Impurity fraction** - **Impurity species** - **Connection length** - **Electron temperature and density** These parameters are crucial for ensuring the effective operation of the divertor in high - power experiments such as ITER and TPX. ### Research Background The current divertor design relies on the radiation of impurities and hydrogen gas to transfer the energy of the edge plasma to the walls of the main chamber and the divertor chamber. However, the efficiency of this process is affected by multiple factors, including heat flux, impurity species, and connection length, etc. The paper points out that relying solely on the radiation rate under coronal equilibrium is not sufficient to dissipate the highest heating power expected in future experiments. Therefore, the author explores methods to enhance the radiation rate through charge - exchange recombination and impurity recycling, and formulates corresponding criteria. ### Main Content 1. **Model Establishment**: - By solving the heat conduction equation along the magnetic field lines, considering the impurity radiation loss, and introducing the effects of charge - exchange recombination and impurity recycling. - Convert the equation into practical units for better understanding and application. 2. **Result Analysis**: - Calculate the radiation efficiency of four impurities, namely beryllium (Be), carbon (C), neon (Ne), and argon (Ar), under different conditions (such as the neutral particle fraction \( n_0/n_e \) and the impurity recycling time \( n_{etrecy} \)). - Analyze the detachment conditions required for two high - power discharge cases, DIII - D and ITER. 3. **Conclusion**: - It is found that neon is one of the most effective radiating impurities because it has lower requirement conditions. - A preliminary optimization method for selecting the best impurity species is proposed, but the final selection requires further experimental research and complex computer simulations. ### Formula Summary The key formulas involved in the paper are as follows: - Heat conduction equation under electron pressure equilibrium: \[ \frac{\partial}{\partial \kappa} \left( \frac{Q_{||}}{T_e^{2.5}} \right) = -\frac{n_s Z f_{Z,e}}{L(T_e)} \] - Radiation power limit: \[ \frac{Q_{||} \leq n_s T_s f_z Z L(T_s)}{} \] - Relationship between connection length and temperature: \[ x = \int \frac{T^{0.5}}{Q_{||}(T)} dT \] Through these formulas, the author obtains the specific conditions required to achieve effective energy dissipation and provides theoretical guidance for future experiments.

Analytic Criteria for Power Exhaust in Divertors due to Impurity Radiation

Radiation rates for low Z impurities in edge plasmas

Performance assessment of long-legged tightly-baffled divertor geometries in the ARC reactor concept

Conditions and benefits of X-point radiation for the island divertor

Physics basis for the first ITER tungsten divertor

An improved understanding of the roles of atomic processes and power balance in divertor target ion current loss during detachment

Power handling in a highly-radiative negative triangularity pilot plant

Divertor enrichment of recycling impurity species (He, N 2 , Ne, Ar, Kr) in ASDEX Upgrade H-modes

Compatibility of divertor detachment and ELM suppression in DIII-D high-βp plasmas with ITER-similar shape

Optimal Thermal-Hydraulic Performance for Helium-Cooled Divertors

Impact of gas injection location and divertor surface material on ITER fusion power operation phase divertor performance assessed with SOLPS-ITER

Conceptual design study for heat exhaust management in the ARC fusion pilot plant

Divertor shaping with neutral baffling as a solution to the tokamak power exhaust challenge

Design study of helium-solid suspension cooled blanket and divertor plate for a tokamak power reactor

Analyses for Passive Safety of Fusion-Reactor During Ex-Vessel Loss-Of-Coolant Accident

Evaluation of plasma impurity concentration during radiative divertor operation mode on EAST

Prediction of Divertor Heat Flux Width for ITER Pre-Fusion Power Operation Using BOUT++ Transport Code

Correlation between impurity radiation rollover and divertor detachment with boundary impurity seeding in HL-2A

Analysis of Divertor Heat Flux with Infrared Thermography During Gas Fuelling in the Hl-2a Tokamak

UEDGE modeling of plasma detachment of CFETR with ITER‐like divertor geometry by external impurity seeding