Abstract:The presence of abundant clay components and microporous structure in shale results in its high hydrophilicity, making a water-rich environment inevitable in petroleum exploration projects. Therefore, it is crucial to consider the influence of bedding structure, moisture content, confining pressure, and their combined effects on the geomechanical properties of shale. This article aims to investigate the mechanical properties of deep shale under varying water content conditions, elucidate the failure mode and failure mechanism of shale in actual engineering scenarios, and explores the interplay between stress, structure, moisture content, and other factors on its mechanical properties. The evaluation of wellbore stability and fracture propagation effects is proposed based on laboratory experiments using triaxial stress and strain data, along with the application of energy evolution theory. The experimental procedures encompass an analysis of shale's microscopic components and structure, as well as anisotropic shale triaxial compression tests conducted under different moisture contents and confining pressures. The results demonstrate that shale exhibits dense pores in its microstructure and displays pronounced anisotropic characteristics in its macrostructure. The presence of water within these pores, combined with the in situ stress within the formation, significantly influences the mechanical properties of shale. This anisotropy decreases with increasing moisture content, but the mechanical performance still decreases. Under triaxial compression conditions, the increase in confining pressure to some extent enhances the anisotropy of shale's deformation characteristics, which is related to the failure modes of shale. However, the detrimental effect of moisture content on shale's mechanical properties still persists. In order to quantify the impact of these factors, this study utilizes the elastic modulus as an indicator of the coupling effect. It combines the triaxial strain curve obtained from laboratory tests and proposes an evaluation index for shale mechanical properties based on the energy evolution theory. This index is suitable for assessing wellbore stability (the stability index called SI r ) and crack expansion (the brittleness index called BI r ). The calculation results reveal that, during the wellbore drilling process, excavating parallel to the direction of shale bedding while maintaining low moisture content and high confining pressure yields a higher SI r value, indicating better wellbore stability. On the other hand, during reservoir fracturing, fracturing perpendicular to the shale bedding direction and maintaining low confining pressure and moisture content result in a smaller BI r value. This approach is more beneficial for the expansion of shale fracture network in engineering.

Study on Parallel Bond and Smooth Joint Dual Model Parameter Calibration of Mechanical Properties of Shale Under Pressure

Study on the nonlinear time-dependent deformation characteristics and viscoelastic-plastic model of shale under direct shear loading path

Experimental and numerical study on dynamic mechanical behaviors of shale under true triaxial compression at high strain rate

A Method for Estimating the Mechanical Parameters of the Laminae of Laminated Rocks Based On Uniaxial Compression and Tensile Tests

Nanoscale mechanical property variations concerning mineral composition and contact of marine shale

Dynamic impact experimental and global cohesive element method to shale fracture characterization

Experimental Study on the Failure Mechanisms in Brittle Shales

A Study of Three Intrinsic Problems of the Classic Discrete Element Method Using Flat-Joint Model

Multiscale Mechanical Properties of Shales: Grid Nanoindentation and Statistical Analytics

Numerical simulations on compression behaviors of the laminated shale based on the digital image technology and the discrete element method

Investigation on failure behavior and hydraulic fracturing mechanism of Longmaxi shale with different bedding properties

Study on failure characteristics and evaluation index of aquifer shale based on energy evolution

Experimental study on mechanical properties of shale rock and its strength criterion

Study on the correlation and calibration of macro and micro parameters of discrete element model for sandstone

Experimental and Numerical Study of the Effects of Layer Orientation on the Mechanical Behavior of Shale

Non-Destructive Pore-Scale Approach to Evaluate Elastic Properties of Shale Samples by Imaging, Modeling and Simulation

Research of water influence on macro and homogenized fracture toughness, brittleness and relationship between different mechanical properties of Longmaxi shale outcrop

Discrete element simulation on failure mechanical behavior of transversely isotropic shale under two kinds of unloading paths

A multiscale framework for the simulation of the anisotropic mechanical behavior of shale

Rock Macro–Meso Parameter Calibration and Optimization Based on Improved BP Algorithm and Response Surface Method in PFC 3D

Experimental and constitutive modeling of the anisotropic mechanical properties of shale subjected to thermal treatment